Memory effects in superparamagnetic La<Subscript>0.6</Subscript>Pb<Subscript>0.4</Subscript>MnO<Subscript>3</Subscript> nanoparticles

Using different temperature and field protocols, the memory behaviors in the dc magnetization and magnetic relaxation are observed at temperature below blocking temperature T_B = 93 K in weakly interacting manganite La_0.6Pb_0.4MnO₃ nanoparticles. The results indicate that the magnetic dynamics of this nanoparticle system is strongly correlated with a wide distribution of particle relaxation times, which may arise from the particle weak interaction and distribution of the particle size.     

Room-temperature ferromagnetism of Cu-doped ZnO films probed by soft X-ray magnetic circular dichroism

We report direct evidence of room-temperature ferromagnetic ordering in O-deficient ZnO:Cu films by using soft x-ray magnetic circular dichroism and x-ray absorption. Our measurements have revealed unambiguously two distinct features of Cu atoms associated with (i) magnetically ordered Cu ions present only in the oxygen-deficient samples and (ii) magnetically disordered regular Cu2+ ions present in all the samples. We find that a sufficient amount of both oxygen vacancies (V(O)) and Cu impurities is essential to the observed ferromagnetism, and a non-negligible portion of Cu impurities is uninvolved in the magnetic order. Based on first-principles calculations, we propose a microscopic "indirect double-exchange" model, in which alignments of localized large moments of Cu in the vicinity of the V(O) are mediated by the large-sized vacancy orbitals.     

Surface-enhanced Raman scattering from silver nanostructures with different morphologies

Scanning electron microscopy and X-ray diffraction reveal that four different types of crystalline silver nanostructures including nanoparticles, nanowires, nanocubes, and bipyramids are synthesized by a solvothermal method by reducing silver nitrate with ethylene glycol using poly(vinylpyrrolidone) as an adsorption agent and adding different quantities of sodium chloride to the solution. These nanostructures which exhibit different surface plasma resonance properties in the ultraviolet–visible region are shown to be good surface-enhanced Raman scattering (SERS) substrates using rhodamine 6G molecules. Our results demonstrate that the silver nanocubes, bipyramids with sharp corners and edges, and aggregated silver nanoparticles possess better SERS properties than the silver nanowires, indicating that they can serve as high-sensitivity substrates in SERS-based measurements.     

A diffractive study of optical parametric interactions in nonlinear photonic crystals

With the nonlinear diffraction concept, we present a diffractive study of optical parametric interactions in nonlinear photonic crystals. The nonlinear diffraction concept enables the design of complicated nonlinear photonic crystal structures in an intuitive way. We show that there are two basic linear sequences, the anti-stacking and the para-stacking sequences, existing in a one-dimensional structure; and we present the realization of multiple phase-matching resonances in the combination of the two basic sequences. The parameters affecting the structure factor of a two-dimensional nonlinear photonic crystal are investigated, which indicate that not only the Ewald construction but also the relative domain size determines two-dimensional nonlinear diffractions.     

1-mJ, sub-5-fs carrier–envelope phase-locked pulses

We report the routine generation of sub-5-fs laser pulses with 1-mJ energy and stable carrier–envelope phase at 1-kHz repetition rate, obtained by compressing the multi-mJ output from a phase-locked Ti:sapphire amplifier in a rare-gas-filled hollow fiber. The dual-stage amplifier features a hybrid transmission grating/chirped mirror compressor providing 2.2-mJ, 26-fs pulses at 1 kHz with standard phase deviation of 190 mrad rms. We demonstrate hour-long phase stability without feedback control of grating position or rigorous control of the laser environment, simply by using small pulse stretching factors in the amplifier, which minimize the beam pathway in the compressor. The amplifier also integrates a versatile AOPDF (acousto-optic programmable dispersive filter) for closed-loop spectral phase optimization. The various factors influencing the overall phase stability of the system are discussed in detail. Using the optimized output, 1-mJ, 4.5-fs pulses are generated by seeding the neon gas filled hollow fiber with a circularly polarized input beam. A standard phase deviation of 230 mrad after the HCF is obtained by direct f-to-2f detection and slow-loop feedback to the oscillator locking electronics without any additional spectral broadening.     

Pivotal role of ballistic and quasi-ballistic electrons on LED efficiency

Significant progress in the power conversion efficiency and brightness of InGaN-based light emitting diodes (LEDs) has paved the way for these devices to be considered for LED lighting. In this realm, however, the efficiency must be retained at high injection levels in order to generate the lumens required. Unfortunately, LEDs undergo a monotonic efficiency degradation starting at current densities even lower than 50 A/cm² which would hinder LED insertion into the general lighting market. The physical origins for the loss of efficiency retention are at present a topic of intense debate given its enormous implications. This paper reviews the current status of the field regarding the mechanisms that have been put forward as being responsible for the loss of efficiency, such as Auger recombination, electron overflow (spillover), current crowding, asymmetric injection of electrons and holes, and poor transport of holes through the active region, the last one being applicable to multiple quantum well designs. While the Auger recombination received early attention, increasing number of researchers seem to think otherwise at the moment in that it alone (if any) cannot explain the progressively worsening loss of efficiency reduction as the InN mole fraction is increased. Increasing number of reports seems to suggest that the electron overflow is one of the major causes of efficiency degradation. The physical driving force for this is likely to be the relatively poor hole concentration and transport, and skewed injection favoring electrons owing to their relatively high concentration. Most intriguingly there is recent experimental convincing evidence to suggest that quasi-ballistic electrons in the active region, which are not able to thermalize within the residence time and possibly longitudinal optical phonon lifetime, contribute to the carrier overflow which would require an entirely new thought process in the realm of LEDs.     

Design and performance of a compact superconducting duplexer at VHF-band

This paper presents the design, fabrication, and performance of a compact high temperature superconducting duplexer at VHF-band. The duplexer consists of a T-junction and two four-pole filters with an ultra-narrow bandwidth of 400 kHz at 216 MHz and 220 MHz, respectively. By using gap-coupled feedlines in the filter design procedure, the duplexer is constructed by connecting the two filters using a T-junction with short-length branches. The two filters are fabricated on separate substrates and are carefully packaged to achieve a high isolation between the duplexer channels. The duplexer has a compact size of 41.6 mm × 28 mm. The measured results at 73 K show a high performance. The return loss is −17 dB, the insertion losses of both channels are less than 0.16 dB, and the out-of-band rejections are higher than 60 dB. The isolation between the two channels is better than 76 dB.     

Wavelength-modulation-spectroscopy for real-time, in situ NO detection in combustion gases with a 5.2 μm quantum-cascade laser

A mid-infrared absorption strategy with calibration-free wavelength-modulation-spectroscopy (WMS) has been developed and demonstrated for real-time, in situ detection of nitric oxide in particulate-laden combustion-exhaust gases up to temperatures of 700 K. An external-cavity quantum-cascade laser (ECQCL) near 5.2 μm accessed the fundamental absorption band of NO, and a wavelength-scanned, 1f-normalized WMS with second-harmonic detection (WMS-2f/1f) strategy was developed. Due to the external-cavity laser architecture, large nonlinear intensity modulation (IM) was observed when the wavelength was modulated by injection-current modulation, and the IM indices were also found to be strongly wavelength-dependent as the center wavelength was scanned with piezoelectric tuning of the cavity. A quantitative model of the 1f-normalized WMS-2f signal was developed and validated under laboratory conditions. A sensor was subsequently designed, built and demonstrated for real-time, in situ measurements of NO across a 3 m path in the particulate-laden exhaust of a pulverized-coal-fired power plant boiler. The 1f-normalized WMS-2f method proved to have better noise immunity for non-absorption transmission, than wavelength-scanned direct absorption. A 0.3 ppm-m detection limit was estimated using the R15.5 transition near 1927 cm⁻¹ with 1 s averaging. Mid-infrared QCL-based NO absorption with 1f-normalized WMS-2f detection shows excellent promise for practical sensing in the combustion exhaust.     

Significant positive magnetoresistance of graphene/carbon composite films prepared by electrospraying and subsequent heat treatment

Graphene/carbon composite films were prepared by electrospraying a graphene/polyacrylonitrile composite solution on SiO₂-coated silicon substrates and subsequent heat treatment. The as-produced graphene/carbon composite films had a porous structure comprising graphene layers. With a magnetic field applied perpendicularly to the sample, an unexpectedly significant positive magnetoresistance attributed to e–e interaction and weak localization has been observed, which constantly increases with the magnetic field in the temperature range of 300–50 K from 0 to 80 kOe.