Determination of fluoride in wine by fluoride selective ion electrode, standard addition method: collaborative study

The accuracy, precision, and reproducibility of a rapid method for determination of fluoride in wine, using a fluoride selective ion electrode, were established by a collaborative study involving 12 laboratories, 5 in Europe and 7 in the United States. The laboratories assayed 6 Youden pairs of fluoride-fortified, red and white wine samples with fluoride concentrations ranging from 0.2 to 3.0 mg/L. The relative standard deviations of repeatability ranged from 1.94 to 4.88%; relative standard deviations of reproducibility ranged from 4.15 to 18.40%. HORRAT values ranged from 0.30 to 0.97. The average recovery was 99.97%. Based on the statistical results of this collaborative study, the Study Director recommends that this method be adopted First Action.     

On the Mechanical Properties of Popgraphene-Based Nanotubes: a Reactive Molecular Dynamics Study

Carbon-based tubular materials have sparked a great interest in future electronics and optoelectronics device applications. In this work, we computationally studied the mechanical properties of nanotubes generated from popgraphene (PopNTs). Popgraphene is a 2D carbon allotrope composed of 5-8-5 rings. We carried out fully atomistic reactive (ReaxFF) molecular dynamics for PopNTs of different chiralities ( and ) and/or diameters and at different temperatures (from 300 up to 1200 K). Results showed that the tubes are thermally stable (at least up to 1200 K). All tubes presented stress/strain curves with a quasi-linear behavior followed by an abrupt drop of stress values. Interestingly, armchair-like PopNTs ( ) can stand a higher strain load before fracturing when contrasted to the zigzag-like ones ( ). Moreover, it was obtained that Young's modulus (Y_Mod) (750–900 GPa) and ultimate strength (σ_US) (120–150 GPa) values are similar to the ones reported for conventional armchair and zigzag carbon nanotubes. Y_Mod values obtained for PopNTs are not significantly temperature-dependent. While the σ_US values for the showed a quasi-linear dependence with the temperature, the exhibited no clear trends.     

Ultra‐high pressure LC for astaxanthin determination in shrimp by‐products and active food packaging

Nowadays, there is increasing interest in natural antioxidants from food by‐products. Astaxanthin is a potent antioxidant and one of the major carotenoids in crustaceans and salmonids. An ultra‐high pressure liquid chromatographic method was developed and validated for the determination of astaxanthin in shrimp by‐products, and its migration from new packaging materials to food simulants was also studied. The method uses an UPLC® BEH guard‐column (2.1 × 5 mm, 1.7 µm particle size) and an UPLC® BEH analytical column (2.1 × 50 mm, 1.7 µm particle size). Chromatographic separation was achieved using a programmed gradient mobile phase consisting of (A) acetonitrile–methanol (containing 0.05 m ammonium acetate)–dichloromethane (75:20:5, v/v/v) and (B) ultrapure water. This method was evaluated with respect to validation parameters such as linearity, precision, limit of detection, limit of quantification and recovery. Low‐density polyethylene films were prepared with different amounts of the lipid fraction of fermented shrimp waste by extrusion, and migration was evaluated into food simulants (isooctane and ethanol 95%, v/v). Migration was not detected under the tested conditions. Copyright © 2012 John Wiley & Sons, Ltd.     

Optimized Synthesis of Silver Nanoparticles by Factorial Design with Application for the Determination of Melamine in Milk

A colorimetric method based on silver nanoparticles was developed for the determination of melamine in milk. Silver nanoparticles were synthesized without any stabilizer, using sodium borohydride as the reducing agent. Optimization of the variables for the formation of the nanoparticles was performed by factorial design, resulting in stable colloidal silver nanoparticles with a mean diameter of 14.0?±?2.7?nm. Spectrophotometric measurements performed at 475?nm showed a linear range from 0.033 to 1.50?mg?L^?1 of melamine with limits of detection and quantification of 0.009 and 0.031?mg?L^?1, respectively. The method provided highly sensitive determination of melamine in milk.     

Influence of heat treatment temperature of carbon fiber felt substrate on polyaniline electrosynthesis and its properties

Journal of Solid State Electrochemistry - Polyaniline was electrosynthesized using three voltammetric cycles on carbon fiber felts annealed at 1400, 1600, 2000, and 2300 K. Felts and...     

Metal Organic Framework-235 (MOF-235) Modified Carbon Paste Electrode for Catechol Determination in Water

MOF-235 is presented as an orange powder, with crystals of the octahedral formation. It was already used as adsorbent to remove different compounds from water; however, no attempts have been published about the exploration of the MOF-235 application as electrochemical sensor for organic compounds yet. MOF-235 was synthetized and after that, it was characterized by SEM, XRD and FTIR. Graphite electrodes (GEs) were modified with different MOF-235 ratio (5 %, 7 %, 10 %, 12 % and 14 %) and these modified GEs were characterized by cyclic voltammetry (CV) measurements in order to determine the effect of MOF-235 concentration on the current response. Results indicated that, a significant improvement on the current response was attained at MOF-235(10 %)/GE respect to unmodified GE. This behavior is related to the pore structure and multiple active sites on the MOF surface. The performance of the MOF-235(10 %)/GE as electrochemical sensor for detecting catechol was assessed by differential pulse voltammetry (DPV). Catechol detection response of MOF-based sensor provided a detection limit of about 12.79 μmol L⁻¹ with a correlation coefficient (R²) of about 0.9928 ranging from 12 to 514 μmol L⁻¹. Finally, MOF-235(10 %)/GE was used to determine catechol in real water matrixes.     

Nanostructure and dielectric properties of a twist-bend nematic liquid crystal mixture

We present freeze-fracture transmission electron microscopy (FF-TEM), dielectric spectroscopy and electro-optic measurements on a dimeric liquid crystal mixture, which previously was proposed to form the twist-bend nematic (N_tb) phase. Our FF-TEM studies provide a direct image of a 10.5 nm periodic structure, consistent with the expected nanoscale, heliconical twist-bend modulation of the molecular orientation. Dielectric measurements in the 100 Hz to 10 MHz range reveal three nearly Debye-type dispersion processes in the nematic and the twist-bend phase. Low frequency 8 V/µm electric fields applied on planar cells cause the optical-scale stripe texture (another characteristic feature of the N_tb phase) to disappear. Higher (>16 V/µm) fields gradually realign the heliconical axis along the electric field; it relaxes back after the field removal.     

Chlorhexidine/losartan ionic pair binding and its nanoprecipitation: physico-chemical characterisation and antimicrobial activity

Chlorhexidine is a widely used, di-cationic, broad-spectrum antimicrobial agent and losartan is a well-known, anionic-specific antagonist of AT1 renin–angiotensin receptor that acts as an anti-hypertensive agent. The combination of these molecules gives a chlorhexidine di-losartanate (ClxLos₂) hydrophobic ion pair that spontaneously aggregates into nanoparticles (NPs). This work investigated the formation of ClxLos₂ NPs using the analysis of the solid state by fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry and scanning electron microscopy and in aqueous environment by calorimetric, zeta potential and dynamic light scattering titrations. Furthermore, to demonstrate the potential antimicrobial activity of ClxLos₂, in vitro antibacterial tests were conducted against Staphylococcus aureus (ATCC 27664), Streptococcus viridans (ATCC 11563) and Enterococcus faecalis (ATCC 14508). Based on these studies, it is proposed that ClxLos₂ could be used for controlled drug release based on ionic dissociation during dilution, thereby avoiding the use of any solid matrix.