Liquid templating for nanoparticle organization into complex patterns

Dewetting of thin films of charged polymer solutions produces complex patterns that can be applied to direct nanoparticle organization on solid substrates. The morphology produced by dewetting can be controlled by the solution properties, temperature, and substrate wetting. In this work, new results on this liquid-template self-assembly system are presented, with special emphasis on producing large arrays of organized nanoparticles. On a hydrophilic substrate with complete wetting, the patterns include polygonal networks and parallel-track arrays that extend over several hundreds of microns. These large structures are formed under well-controlled drying conditions and characterized by scanning electron microscopy, which is better suited for the examination of large as well as small areas than atomic force microscopy. On partial wetting substrates, new patterns are observed, including a complex set of parallel curved bands with variable particle number densities.     

Natural Brazilian Raw Material to Develop O/W Emulsions Containing Lamellar Gel Phase (Development and Analysis of Emulsion with Vegetable Oils)

Oil-in-water emulsions were developed employing the HLB system and emulsion phase inversion (EPI) method. X-ray diffraction revealed that the anisotropic structures around the inner phase globules were lamellar gel network phases. The calculated distances between the lamellae made after preparation and 3 month latter showed that there was no swelling of the lamellar gel network indicating good stability and few changes during storage. The developed emulsions were stable and have potential to be employed for cosmetic and pharmaceutical purposes. The gel phase network and vegetal components seemed to be contributing factors.      

Purification, Characterization, and Specificity Determination of a New Serine Protease Secreted by Penicillium waksmanii

The purpose of this work was to purify a protease from Penicillium waksmanii and to determine its biochemical characteristics and specificity. The extracellular protease isolated that was produced by P. waksmanii is a serine protease that is essential for the reproduction and growth of the fungus. The protease isolated showed 32 kDa, and has optimal activity at pH 8.0 and 35 °C towards the substrate Abz-KLRSSKQ-EDDnp. The protease is active in the presence of CaCl₂, KCl, and BaCl, and partially inhibited by CuCl₂, CoCl₂ and totally inhibited by AlCl₃ and LiCl. In the presence of 1 M urea, the protease remains 50 % active. The activity of the protease increases 60 % when it is exposed to 0.4 % nonionic surfactant-Triton X-100 and loses 10 % activity in the presence of 0.4 % Tween-80. Using fluorescence resonance energy transfer analysis, the protease showed the most specificity for the peptide Abz-KIRSSKQ-EDDnp with k _cat/K _m of 10,666 mM^?1?s^?1, followed by the peptide Abz-GLRSSKQ-EDDnp with a k _cat/K _m of 7,500 mM^?1?s^?1. Basic and acidic side chain-containing amino acids performed best at subsite S₁. Subsites S₂, S₃, S^′ ₂, and S^′ ₁, S^′ ₃ showed a preference for binding for amino acids with hydrophobic and basic amino acid side chain, respectively. High values of k _cat/K _m were observed for the subsites S₂, S₃, and S^′ _2. The sequence of the N-terminus (ANVVQSNVPSWGLARLSSKKTGTTDYTYD) showed high similarity to the fungi Penicillium citrinum and Penicillium chrysogenum, with 89 % of identity at the amino acid level.     

Multi-walled carbon nanotubes functionalized with triethylenetetramine as fillers to enhance epoxy dimensional thermal stability

Multi-walled carbon nanotubes (MWCNT) have been used as fillers to improve thermal properties such as glass transition temperature (T _g) of epoxy materials. In this work, nanocomposites based on diglycidyl ether of bisphenol A resin and triethylenetetramine (TETA) were prepared by a three-roll mill process with TETA-functionalized (MWCNT–COTETA) and neat MWCNT. Thermogravimetric analysis of the nanofillers showed that in the case of MWCNT–COTETA, there is a 15 % mass loss that can be attributed to –COTETA and residual oxygen-containing functional groups. The influence of chemical modification on the behavior of the glass T _g was evaluated by dynamic scanning calorimetry. The MWCNT–COTETA allowed a ~20 °C reproducible increase of T _g in concentrations in the range of 0.5–1.0 mass%. Furthermore, images obtained by scanning electron microscopy were used to investigate the morphology of the polymer matrix and its interfaces. The quality of the dispersion and interaction of the nanotubes in the epoxy matrix was assessed from the images. Both the neat epoxy and the nanocomposite with MWCNT showed low thermal shrinkage upon curing.     

Antibacterial properties of 3 H-spiro[1-benzofuran-2,1'-cyclohexane] derivatives from Heliotropium filifolium

A re-examination of cuticular components of Heliotropium filifolium allowed the isolation of four new compounds: 3'-hydroxy-2',2',6'-trimethyl-3H-spiro[1-benzo-furan-2,1'-cyclohexane]-5-carboxylic acid(2), methyl 3'-acetyloxy-2',2',6'-trimethyl-3H-spiro[1-benzofuran-2,1'-cyclohexane]-5-carboxylate (3), methyl 3'-isopentanoyloxy-2',2',6'-trimethyl-3H-spiro[1-benzofuran-2,1'-cyclohexane]-5-carboxylate (4) and methyl 3'-benzoyloxy-2',2',6'-trimethyl-3H-spiro[1-benzofuran-2,1'-cyclohexane]-5-carboxylate (5).Compounds 2-5 were identified by their spectroscopic analogies with filifolinol (1), and their structures confirmed by chemical correlation with 1. The antimicrobial properties of the compounds were tested against Gram positive and Gram negative bacteria. Some of them proved to be active against Gram positive, but inactive against Gram negative bacteria. In searching for structure-activity relationships from the obtained MIC values, lipophilicity was shown to be an important variable.     

Synthesis and characterization of CeO<Subscript>2</Subscript>–graphene composite

The synthesis and characterization of graphite oxide (GO), graphene (GS), and the composites: GS–CeO₂ and GO–CeO₂ are reported. This synthesis was carried out by mixing aqueous solutions of CeCl₃·7H₂O and GO, which yields the oxidized composite GO–CeO₂. GO–CeO₂ was hydrothermally reduced with ethylene glycol, at 120 °C, yielding the reduced composite GS–CeO₂. GO, GS ,and the composites with CeO₂ were characterized by CHN, TG/DTG, BET, XRD, SEM microscopy, FTIR, and Raman spectroscopy. The estimation of crystallite size of CeO₂ anchored on GO and on GS by Raman, XRD, and SEM agreed very well showing diameters about 5 nm. The role of particles of CeO₂ coating carbon sheets of GO and GS was discussed.     

Two new isoflavonoids from Bowdichia virgilioides

Two new isoflavonoids 7,8,4'-trimethoxyisoflavone and 7,8,4'-trimethoxyisoflavanone and calycosin (7,3'-hydroxy-4'-methoxyisoflavone) were isolated from the wood of the leguminous tree Bowdichia virgilioides by usual chromatographic procedures. Besides these compounds the pterocarpane (-)-maackianin, isoliquiritigenin (4,2',4'-trihydroxychalcone), and the hydrobenzylfurane derivative bowdenol were also obtained. The structures of these new compounds were determinated by MS and 1D and 2D NMR spectral analysis.     

pH at the micellar interface: synthesis of pH probes derived from salicylic acid, acid-base dissociation in sodium dodecyl sulfate micelles, and Poisson-Boltzmann simulation

The study of the H+ concentration at the micellar interface is a convenient system for modeling the distribution of H+ at interfaces. We have synthesized salicylic acid derivatives to analyze the proton dissociation of both the carboxylic and phenol groups of the probes, determining spectrophotometrically the apparent pK(a)'s (pK(ap)) in sodium dodecyl sulfate, SDS, micelles with and without added salt. The synthesized probes were 2-hydroxy-5-(2-trimethylammoniumacetyl)benzoate; 2-hydroxy-5-(2-dimethylhexadecylammoniumacetyl)benzoate; 2-hydroxy-5-(2-dimethylhexadecylammoniumhexanoyl)benzoate; 2-hydroxy-5-(2-dimethylhexadecylammoniumundecanoyl)benzoate; 2-hydroxy-5-acetylbenzoic acid; and 2-hydroxy-5-dodecanoylbenzoic acid. Upon incorporation into SDS micelles the pK(ap)'s of both carboxylic and phenol groups increased by ca. 3 pH units and NaCl addition caused a decrease in the probe-incorporated pK(ap). The experimental results were fitted with a cell model Poisson-Boltzmann (P-B) equation taking in consideration the effect of salt on the aggregation number of SDS and using the distance of the dissociating group as a parameter. The conformations of the probes were analyzed theoretically using two dielectric constants, e.g., 2 and 78. Both the P-B analysis and conformation calculations can be interpreted by assuming that the acid groups dissociate very close to, or at, the interface. Our results are consistent with the assumption that the intrinsic pK(a)'s of both carboxylic and phenol groups of the salicylic acid probes used here can be taken as those in water. Using this assumption the micellar and salt effects on the pK(ap)'s of the (trialkylammonium)benzoate probes were described accurately using a cell model P-B analysis.