Determination of copper in medicinal plants used as dietary supplements by atomic absorption spectrometry with direct flame solid analysis

An alternative device for the direct solid analysis (DSA) for copper determination by flame atomic absorption spectrometry (FAAS) is proposed. Copper was directly determined in commercial medicinal plants used as dietary supplements. The determination of copper in solid samples by DSA–FAAS was made by using a conventional air–acetylene flame. Between 0.05 and 1.5 mg of each test, sample was weighed directly into a small polyethylene vial connected to the device used for solid introduction into the flame. Test samples were introduced into the flame as a dry aerosol using a T-quartz cell set between the burner and the optical path. The T-quartz cell has a slit in the superior part by which the solid aerosol passes to the flame. A transient signal, evaluated as integrated absorbance, is produced and it is totally integrated in 2 s. Background signals always presented absorbance values less than 0.1. It was found a characteristic mass of 0.8 ng Cu and absolute limit of detection of 1.2 ng (3 s), or 1.2 μg g⁻¹ if a sample mass of 1 mg was used. Optimized conditions for air flow rate, flame stoichiometry, and so on were established as well. No excessive grinding of the samples was needed and samples with particle of size less than 80 μm were used throughout. No statistical difference between the results from the proposed system and those obtained by sample digestion and determination by conventional FAAS was observed. With the proposed procedure, more than 50 test samples can be analyzed in 1 h and it can be easily adapted to conventional spectrometers for FAAS.     

Study of the catalytic behavior of montmorillonite/iron(III) and Mn(III) cationic porphyrins

Two samples of montmorillonite (one of Brazilian origin, BNC1 clay, and the other STX-1, supplied by the Clay Mineral Society Repository (University of Missouri, USA) were allowed to react with biomimetic metalloporphyrins of Fe(III) and Mn(III) in cationic form. The compounds were characterized by several techniques, showing that the metalloporphyrins molecules were adsorbed at the surface of the clay platelet crystals. The catalytic activities of the intercalated complexes for the oxidation of alkane were dependent upon the concentration of the porphyrin immobilized in the clay and factors such as the metal ion species in the porphyrins, choice of solvent, and concentration of the iodosylbenzene oxidant. Good selectivity to cyclohexanol instead of cyclohexanone was observed for the catalytic oxidation of cyclohexane by iodosylbenzene.     

Structural and mechanistic look at the orthoplatination of aryl oximes by dichlorobis(sulfoxide or sulfide)platinum(II) complexes

Structural and mechanistic aspects of orthoplatination of acetophenone and benzaldehyde oximes by the platinum(II) sulfoxide and sulfide complexes [PtCl(2)L(2)] (2, L = SOMe(2) (a), rac-SOMePh (b), R-SOMe(C(6)H(4)Me-4) (c), and SMe(2) (d)) to afford the corresponding platinacycles cis-(C,S)-[Pt(II)(C(6)H(3)-2-CR'=NOH-5-R)Cl(L)] (3, R, R' = H, Me) have been investigated. The reaction of acetophenone oxime with sulfoxide complex 2a in methanol solvent occurs noticeably faster than with sulfide complex 2d due to the fact that the sulfoxide is a much better platinum(II) leaving ligand than the sulfide. Evidence is presented that the orthoplatination is a multistep process. The formation of unreactive dichlorobis(N-oxime)platinum(II) cations accounts for the rate retardation by excess acetophenone oxime and suggests the importance of pseudocoordinatively unsaturated species for the C-H bond activation by Pt(II). A comparative X-ray structural study of dimethyl sulfoxide platinacycle 3b (R = R' = Me) and its sulfide analogue 3e (R = H, R' = Me), as well as of SOMePh complex 3c (R = H, R' = Me), indicated that they are structurally similar and a sulfur ligand is coordinated in the cis position with respect to the sigma-bound phenyl carbon. The differences concern the Pt-S bond distance, which is notably longer in the sulfide complex 3e (2.2677(11) A) as compared to that in sulfoxide complexes 3b (2.201(2)-2.215(2) A) and 3c (2.2196(12) A). Whereas the metal plane is practically a plane of symmetry in 3b due to the H-bonding between the sulfoxide oxygen and the proton at carbon ortho to the Pt-C bond, an S-bonded methyl of SOMePh and SMe(2) is basically in the platinum(II) plane in complexes 3c and 3e, respectively. There are intra- and intermolecular hydrogen bond networks in complex 3b. An interesting structural feature of complex 3c is that the two independent molecules in the asymmetric unit of the crystal reveal an extremely short Pt-Pt contact of 3.337 A.     

Bioavailability, bioaccumulation and tolerance of chromium: consequences in the food chain of freshwater ecosystems

Many abiotic and biotic factors can influence the partitioning equilibrium of heavy metals, thus influencing metal impact on aquatic environments. Unicellular algal species release soluble organic substances able to complex metals. In our laboratory a Cr-tolerant strain was selected and isolated from a wild type strain of Scenedesmus acutus. The exudates released by the two strains counteracted the growth inhibition caused by Cr(VI) and the exudates of the Cr-tolerant strain were more effective. On the contrary, the exudates did not reduce chromium toxicity to the cladoceran Daphnia magna. The reduction of chromium effect on algae seems the consequence of an algae-specific interaction among Cr(VI), exudates and algal cells. Chromium uptake resulted to be energy-dependent since bioaccumulation rate in subdued light condition was lower than at high light intensity. The effect of Cr(VI) on algae changed depending on metabolism of the cells and in particular it seemed to be related to the bioaccumulation rate. Tolerance in the selected strain could not be ascribed to a lower uptake of chromium. The difference in sensitivity to chromium between the two strains was exploited to evaluate if tolerance acquired by algae could have consequences for Daphnia. After treatment with Cr(VI), the two strains of S. acutus were used as food source for D. magna. The results indicate that chromium is accumulated by algae in a form not available for daphnids and that Cr tolerance acquired by the algae can be of some advantage to the consumer organism.     

4,5-Dihydroisoxazole and 4,5-dihydro-1,2,4-oxadiazole derivatives from cycloaddition reactions of nitrile oxides to alkyl N-(diphenylmethylene)-α,β-dehydroamino acids

The alkyl N-(diphenylmethylene)-α,β-dehydroamino acids 1 have been submitted to 1,3-dipolar cycloadditions with nitrile oxides. The reactivity of these compounds depends on the type and on the stereochemistry of the β-substituents. With the unsubstituted terms 1a,b the reaction occurs on the C,C double bond, providing a good method for the synthesis of the 4,5-dihydroisoxazole derivatives 3a,b,c and for the gem-functionalized 4,5-dihydroisoxazoles amino carboxylic ester 5. The β-substituted compounds 1c,d,e , inert to 1,1-dimethylethylnitrile oxide, undergo the reaction to the N,C double bond, thus giving with 2a,b the 4,5-dihydro-1,2,4-oxadiazole derivatives 4. All the reactions occur with high site- and regioselectivity.     

Some chemical transformations of the neo-clerodane diterpene teubotrin

Starting from the natural neo-clerodane diterpenoid teubotrin (1) several neo-clerodane derivatives (3-7,9-11) have been obtained. The naturally occurring diterpenoid teuscordinon (12) has also been synthesized from teubotrin (1), showing thereby how some of these transformations can be useful for the synthesis of other natural neo-clerodane diterpenes. The latter are of interest due to their activity as insect antifeedants and other important biological properties.     

Determination of fluoride in complex liquid matrices by electrothermal atomic absorption spectrometry with in-furnace oxygen-assisted ashing

A new chemical method is reported for the determination of total fluoride in complex liquids and suspensions, such as fruit juices, urine, serum and blood. It is based on the formation of the A1F radical in a graphite furnace afterin situ oxygen-assisted ashing of the untreated sample. The absorbance of this radical is measured at 227.45 nm. The method is relatively easy to use and provides a low detection limit (14 ng/ml) and reasonable reproducibility (5–10%).     

Thienopyrrolizines: New condensed triheterocyclic systems

Cyclization of 3-(1-pyrrolyl)thiophene-2-carboxamide derivatives of methyl 3-(1-pyrrolyl)-2-thiophenecarboxylate afforded imminium salts and resulted in the formation of thieno[2,3-b]pyrrolizine derivatives.     

Mass spectrometry of 3,4-dihydroquinazolin-4-ones of pharmaceutical interest. Part 3 . Electron ionization mass spectra of 2-substituted-3-(5′-pyrazolyl)-4(3H)-quinazolinones

The fragmentation reactions induced by electron impact of eighteen title compounds has been investigated with the aid of low beam energy spectra (14 eV, nom. value), metastable ion detection, high resolution measurements and labelling experiments. The loss of the 4-carbonyl oxygen together with the 3-substituent, which constitutes a characteristic fragmentation route of 3-aryl and 3-heteroaromatic substituted-4(3H)-quinazolinones, is again observed, but the presence of a carboxyethyl group at the 4′-position of the pyrazole ring is responsible of an anomalous loss of 47 daltons from the molecular ion. Lastly, a comparison with the previously described behaviour of 3-(5′-isoxazolyl) derivatives was carried out.     

Depolymerization of water soluble coal polymer from subbituminous coal and lignite by lignin peroxidase

Coal polymers, water soluble at pH 3.5, were prepared from North Dakota lignite and German subbituminous coal in 35–61% yield. Gel permeation chromatography showed a major component of relatively narrow molecular weight range >75,000. The material did not dialyze through a 12,000-14,000 MW cutoff membrane under several conditions. Minor amounts of smaller fragments were present, but monomeric components were not detected. Incubation of soluble polymer with lignin peroxidase ofPhanerochaete chrysosporium caused substantial disappearance of the high molecular weight polymer and formation of smaller amounts of both higher and lower molecular weight components, but not of monomeric compounds. Addition of veratryl alcohol enhanced depolymerization. Coal polymer competitively inhibited veratryl alcohol oxidation by lignin peroxidase.