Magnetoelectric effect in laminates of polymer-based pseudo-1–3 (Tb0.3Dy0.7)0.5Pr0.5Fe1.55 composite and?0.3Pb(Mg1/3Nb2/3)O3–0.7PbTiO3 single crystal

We report an extrinsic magnetoelectric effect in composite laminates made by sandwiching one thickness-polarized 0.7Pb(Mg_1/3Nb_2/3)O₃–0.3PbTiO₃ (PMN–PT) piezoelectric single crystal plate between two length-magnetized, polymer-based pseudo-1–3 (Tb_0.3Dy_0.7)_0.5Pr_0.5Fe_1.55 magnetostrictive composite plates. The laminates exhibit large magnetoelectric voltage coefficients (α _V ) of ∼0.17 V/Oe with a flat response for frequencies in excess of 40 kHz and of ∼2.97 V/Oe at the natural resonance frequency of ∼65 kHz. The distinct advantages of the laminates include high magnetic field sensitivity, low Joule heating loss, wide operating bandwidth, and low cost.     

Hybrid optoelectronic bistability in a fiber Bragg grating by use of a tunable fiber laser

We report the observation of hybrid optoelectronic bistability in a fiber Bragg grating (FBG) by use of an electro-optically tuned cw fiber laser in which another wavelength-matched FBG is employed to constitute a tunable resonant cavity. The potential application of such a device as a fiber-optic sensor is also discussed.     

ICP-AES测定向日葵花盘中13种金属元素

向日葵花盘经湿法消解,采用ICP-AES对其中钾、钙、钠、钡、铝、铬、铜、镁、铁、锰、镍、锶、锌13种元素进行测定.对光谱仪的工作条件及分析谱线等测定条件进行了选择,并进行了方法的回收率及精密度试验,其回收率在95％-122％之间.     

Laser plasma shockwave cleaning of SiO2 particles on gold film

A Nd:YAG laser (1064 nm) induces optical breakdown of the airborne above the gold-coated K9 glass surface and the created shockwave removes the SiO₂ particles contaminated on the gold films. The laser cleaning efficiency has been characterized by optical microscopy, dark field imaging, ultraviolet-visible-near infrared spectroscopy, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and the Image-pro software. The relationships between removal ratio and particle position and laser gap distance have been studied in the case of single pulse laser cleaning. The results show that the 1064 nm laser induced plasma shockwave can effectively remove the SiO₂ particles. The removal ratio can reach above 90%. The effects of particle position and laser gap distance on the cleaning efficiency are simulated for the single pulse laser cleaning. The simulated results are consistent with the experimental ones.     

40Gbps NRZ在基于宽带CFBG色散补偿的G.652光纤中无电中继传输500km

在基于宽带CFBG色散补偿的G.652光纤中,40Gbps NRZ码无电中继传输500km,在误码率BER=10(-10)下的功率代价约为2.2dB,积累1h的误码率为7.3×10(-12).传输系统中采用的CFBG的3dB带宽约为1.2nm,中心波长处时延纹波小于25ps,反射谱纹波小于2dB,差分群时延小于1ps....     

Influence of NH<Subscript>3</Subscript> flow rate on pyridine-like N content and NO electrocatalytic oxidation of N-doped multiwalled carbon nanotubes

Nitrogen-doped multiwalled carbon nanotubes (N-MWCNTs) have been prepared by pyrolysis of pyridine and iron phthalocyanine over an iron catalyst at 850 °C at various ammonia gas (NH₃) flow rates. X-ray photoelectron spectroscopy results reveal that the pyridine-like nitrogen (N) content can be controlled by changing the flow rate of NH₃, and that pyridine-like N plays an important role: it can increase the electrocatalytic activity and the rate of nitric oxide (NO) electrooxidation and decrease the activation energy of NO electrooxidation. Cyclic voltammetry results demonstrate that the N-MWCNTs sample grown with 200 mL/min NH₃ flow has the maximum N content of 3.22 atomic %, and its content of pyridine-like N that is chemically active is also the highest among all the N-MWCNTs samples. Electrochemical impedance spectroscopy results indicate that two-step electron transfer process occurs at the N-MWCNT-modified electrode, and the control step is different in various potential regions. The stability of NO electrooxidation at the N-MWCNT-modified electrode is examined, and the reaction mechanism is discussed.     

Optical properties of PMN–PT thin films prepared using pulsed laser deposition

(1 ? x)Pb(Mg_1/3Nb_2/3)O₃–xPbTiO₃ (PMN–PT) thin films have been deposited on quartz substrates using pulsed laser deposition (PLD). Crystalline microstructure of the deposited PMN–PT thin films has been investigated with X-ray diffraction (XRD). Optical transmission spectroscopy and Raman spectroscopy are used to characterize optical properties of the deposited PMN–PT thin films. The results show that the PMN–PT thin films of perovskite structure have been formed, and the crystalline and optical properties of the PMN–PT thin films can be improved as increasing the annealing temperature to 750 °C, but further increasing the annealing temperature to 950 °C may lead to a degradation of the crystallinity and the optical properties of the PMN–PT thin films. In addition, a weak second harmonic intensity (SHG) has been observed for the PMN–PT thin film formed at the optimum annealing temperature of 750 °C according to Maker fringe method. All these suggest that the annealing temperature has significant effect on the structural and optical properties of the PMN–PT thin films.     

Synthesis of hexagonal monocrystal AlN microtubes and nanowires at low temperature

This paper reports that pure hexagonal aluminium nitride microtubes and nanowires growing along the [0001] direction have been successfully synthesized by directly reacting AlClh-AlN, microtubes, nanowires,h-AlN, microtubes, nanowiresProject supported by the National Natural Science Foundation of China (Grant No 10474078) and the Science Foundation of the Education Office of Shanxi Province, China.2006-11-23This paper reports that pure hexagonal aluminium nitride microtubes and nanowires growing along the [0001] direction have been successfully synthesized by directly reacting AlCl3 with NaN3 at low temperature （450℃） under condition of non-solvent system. The grey-white powder of reacting product was characterized by high-resolution transmission electron microscope （HRTEM）, which shows that the powder is long straight-wire morphology with outer diameter from 40nm to 300 nm and length up to several micrometres. The results of both electron diffraction （ED） and x-ray diffraction （XRD） indicate that the AlN microtubes have a pure hexagonal monocrystal tubular structure with the combination of the curled AlN nanobelts. Room-temperature photoluminescence spectrum of the synthesized sample showed an emission peak, which is closely related to the small size of the microtubes.     

蓝宝石晶体的光谱精细结构、零场分裂参量及晶体结构

运用不可约张量算法和群理论构造了C3v对称晶场中3d5组念离子的252阶可完全对角化的微扰哈密顿矩阵.用此矩阵计算了Al2O3:Fe3 晶体的光谱精细结构、零场分裂参量(D,a-F)、品体结构,其理论计算值与实验值相符合,并研究了自旋四重态、自旋二重态分别对基态能级的影响,证明了自旋四重态对基态能级的贡献是主要的,自旋二重态对基态能级的贡献虽很小,但却是不可忽略的.进一步研究了SO梢合作用、SS耦合作用对Al2O3:Fe3-品体的光谱精细结构和零场分裂参量的影响,结果发现SO耦合作用是最主要的,SS耦合作用也是不可忽略的.     

氦原子与一氧化碳分子各向异性势的计算研究

本文用高精度的量子力学ab initio方法计算了氦原子与一氧化碳分子相互作用各向异性势能面,通过三重激发校正耦合簇、二次组态相互作用等方法和不同基组的计算结果比较,并采用BSSE方法消除了基组重叠误差,得到了氦原子与一氧化碳分子体系相互作用各向异性势,然后采用精确度较高的密耦（Close-Coupling）近似方法,研究了氦原子与一氧化碳分子碰撞的散射截面,通过计算得出了该体系碰撞激发微分截面和分波截面,计算得到的微分截面数据与实验值符合较好,说明本文得到的势能面是准确的.