Pump−probe experiments at the TEMPO beamline using the low‐α operation mode of Synchrotron SOLEIL

The SOLEIL synchrotron radiation source is regularly operated in special filling modes dedicated to pump–probe experiments. Among others, the low‐α mode operation is characterized by shorter pulse duration and represents the natural bridge between 50 ps synchrotron pulses and femtosecond experiments. Here, the capabilities in low‐α mode of the experimental set‐ups developed at the TEMPO beamline to perform pump–probe experiments with soft X‐rays based on photoelectron or photon detection are presented. A 282 kHz repetition‐rate femtosecond laser is synchronized with the synchrotron radiation time structure to induce fast electronic and/or magnetic excitations. Detection is performed using a two‐dimensional space resolution plus time resolution detector based on microchannel plates equipped with a delay line. Results of time‐resolved photoelectron spectroscopy, circular dichroism and magnetic scattering experiments are reported, and their respective advantages and limitations in the framework of high‐time‐resolution pump–probe experiments compared and discussed.     

Label-free Sorting and Counting of Yeast Cells for Viability Studies

This paper reports the new combination of cell sorting and counting capabilities on a single device. Most state-of-the-art devices combining these technologies use optical techniques requiring complicate experimental setups and labeled samples. The use of a label-free, electrical device significantly decreases the system complexity and makes it more appropriate for use in point-of-care diagnostics.Living and dead yeast cells are separated by dielectrophoretic forces and counted using coulter counters. The combination of these two methods allows the determination of the percentage of living and dead cells for viability studies of cell samples. It could further be used for sorting and counting of blood cells in applications such as diagnosis of insufficient cell concentrations, identification of cell deficiencies or bacterial contamination. The use of dielectrophoresis (DEP) as sorting principle allows to separate cells based on their dielectric properties in place of size-based separation, enabling sorting of large panels of cells and separation of infected and non-infected cells of the same type.     

The distribution of tax payments in a Lévy insurance risk model with a surplus-dependent taxation structure

We study the distribution of tax payments in the model of Kyprianou and Zhou [Kyprianou, A.E., Zhou, X., 2009. General tax structures and the Lévy insurance risk model. J. Appl. Probab. (in press)], that is a Lévy insurance risk model with a surplus-dependent tax rate. More precisely, after a short discussion on the so-called tax identity, we derive a recursive formula for arbitrary moments of the discounted tax payments until ruin and we identify the distribution of the tax payments when there is no force of interest.     

Pathway for the stereocontrolled Z and E production of alpha,alpha-difluorine-substituted phenyl butenoates

An efficient preparation of pure ethyl Z- and E-alpha,alpha-difluoro-4-phenyl-3-butenoate 1a and 1b together with the corresponding acids 2a and 2b is described. The procedures involve stereocontrolled additions of *CF2CO2Et to phenylacetylene or beta-bromostyrene. Compound 1a is easily obtained by addition of *CF2CO2Et to phenylacetylene via a mechanism where the stereochemistry is controlled by an electron-transfer process to produce predominantly the Z vinyl anion. The product 1b is obtained by *CF2CO2Et addition-elimination to Z- or E-beta-bromostyrenes via a mechanism where the stereochemistry is controlled by steric factors in the conformational equilibration of the intermediates.     

Dynamic acoustoelastic testing of weakly pre-loaded unconsolidated water-saturated glass beads

Dynamic acoustoelastic testing is applied to weakly pre-loaded unconsolidated water-saturated glass beads. The gravitational acceleration produces, on the probed beads, a static stress of order 130 Pa, thus the granular medium is close to the jamming transition. A low-frequency (LF) acoustic wave gently disturbs the medium, inducing successively slight expansion and compaction of the granular packing expected to modulate the number of contacts between beads. Ultrasound (US) pulses are emitted simultaneously to dynamically detect the induced modification of the granular skeleton. US propagation velocity and attenuation both increase when the LF pressure increases. The quadratic nonlinear elastic parameter β, related to the pressure dependence of US propagation velocity, was measured in the range 60-530 if water-saturated glass beads are considered as an effective medium. A dynamic modification of US scattering induced by beads is proposed to modulate US attenuation. Complex hysteretic behaviors and tension-compression asymmetry are also observed and analyzed by time-domain and spectral analyses. Furthermore acoustic nonlinearities are measured in cases of quasi-static and dynamic variations of the LF wave amplitude, providing quantitatively similar acoustic nonlinearities but qualitatively different.     

Experimental evidence of simultaneous multi-resonance noise reduction using an absorber with essential nonlinearity under two excitation frequencies

The addition of an essentially nonlinear membrane absorber to a linear vibroacoustic system with multiple resonances is studied experimentally, using quasiperiodic excitation. An extended experimental dataset of the system response is analyzed under steady-state excitation at two frequencies. Thresholds between low and high damping states within the system and associated noise reduction are observed and quantified thanks to frequency conversion and RMS efficiency indicators. Following previous numerical results, it is shown that the membrane NES (Nonlinear Energy Sink) acts simultaneously and efficiently on two acoustic resonances. In all cases, the introduction of energy at a second excitation frequency appears favorable to lower the frequency conversion threshold and to lower the noise within the system. In particular, a simultaneous control of two one-to-one resonances by the NES is observed. Exploration of energy conversion in the two excitation amplitudes plane advocates for a linear dependence of the frequency conversion thresholds on the two excitation amplitudes.     

P-type nitrogen-doped ZnO nanoparticles stable under ambient conditions

Zinc oxide is considered as a very promising material for optoelectronics. However, to date, the difficulty in producing stable p-type ZnO is a bottleneck, which hinders the advent of ZnO-based devices. In that context, nitrogen-doped zinc oxide receives much attention. However, numerous reviews report the controversial character of p-type conductivity in N-doped ZnO, and recent theoretical contributions explain that N-doping alone cannot lead to p-typeness in Zn-rich ZnO. We report here that the ammonolysis at low temperature of ZnO(2) yields pure wurtzite-type N-doped ZnO nanoparticles with an extraordinarily large amount of Zn vacancies (up to 20%). Electrochemical and transient spectroscopy studies demonstrate that these Zn-poor nanoparticles exhibit a p-type conductivity that is stable over more than 2 years under ambient conditions.     

95 GHz millimeter wave signal generation using an arrayed waveguide grating dual wavelength semiconductor laser

We report the generation of a 95?GHz carrier frequency by optical heterodyning of two wavelengths from adjacent channels from an arrayed waveguide grating-based multiwavelength laser. The extended cavity structure of the device provides low phase noise and narrow optical linewidth, further enhanced by the intracavity filter effect of the arrayed waveguide grating. We demonstrate that the generated RF beat note, at 95?GHz, has a -3 dB linewidth of 250?kHz. To the best of our knowledge, this is the narrowest RF linewidth generated from a free-running dual-wavelength semiconductor laser. The device is realized as a photonic integrated circuit using active-passive integration technology, and fabricated on a multiproject wafer run, constituting a novel approach for a compact, low-cost dual-wavelength heterodyne source.     

Microfluidic synthesis of chitosan-based nanoparticles for fuel cell applications

A microfluidic platform is developed for the synthesis of monodisperse, 100 nm, chitosan based nanoparticles using nanogelation with ATP. The resulting nanoparticles tuned and enhanced transport and electrochemical properties of Nafion based nanocomposite membranes, which is highly favorable for fuel cell applications.     

Heuristics for the multi-depot petrol station replenishment problem with time windows

In the multi-depot petrol station replenishment problem with time windows (MPSRPTW), the delivery of petroleum products stored in a number of different petroleum depots to a set of petrol distribution stations has to be optimized. Each depot has its own fleet of heterogeneous and compartmented tank trucks. Stations specify their demand by indicating the minimum and maximum quantities to be delivered for each ordered product and require the delivery within a predetermined time window. Several inter-related decisions must be made simultaneously in order to solve the problem. For this problem, the set of feasible routes to deliver all the demands, the departure depot for each route, the quantities of each product to be delivered, the assignment of these routes to trucks, the time schedule for each trip, and the loading of the ordered products to different tanks of the trucks used need to be determined. In this paper, we propose a mathematical model that selects, among a set of feasible trips, the subset that allows the delivery of all the demands while maximizing the overall daily net revenue. If this model is provided with all possible feasible trips, it determines the optimal solution for the corresponding MPSRPTW. However, since the number of such trips is often huge, we developed a procedure to generate a restricted set of promising feasible trips. Using this restricted set, the model produces a good but not necessarily optimal solution. Thus the proposed solution process can be seen as a heuristic. We report the results of the extensive numerical tests carried out to assess the performance of the proposed heuristic. In addition, we show that, for the special case of only one depot, the proposed heuristic outperforms a previously published solution method.