Highly efficient methods for metacyclophane synthesis

Highly efficient methods for synthesizing metacyclophanes such as 2,6-bridged pyrones and pyridines are described. 4-Hydroxy-2-pyrone derivative 3 bridged at the 3 and 6-positions is readily available. This compound was transformed into 2,6-bridged 4-pyrone 4 on heating in ethanol or in hydrochloric acid. Heating 4 with ammonia or methylamine afforded the corresponding 2,6-bridged 4-pyrone 7 or 8. These pyridones were synthesized directly from 3 by treatment with ammonia or methylamine. These methods have a wide applicability to the bridge length of metacyclophane; compounds with a short bridge (n=8) as well as long bridge (n=18) are synthesized in satisfactory yields.     

Contrasteric stereochemical dictation of the cyclobutene ring-opening reaction by a vacant boron p orbital

Cyclobutene, having a pinacolatoboryl group at the 3-position, was prepared by the reaction of trimethyl borate with a cyclobutenyl anion, which was generated by reductive lithiation of 3-(phenylselenyl)cyclobutene. Its thermal ring-opening reaction provided (Z)-1-borylbuta-1,3-diene selectively despite the arising steric congestion. The contrasteric behavior was accounted for by assuming an electron-accepting interaction of the vacant boron p orbital with the distorted breaking sigma orbital in the inward transition state.     

Synthesis and central nervous system stimulant activity of 5,8-methanoquinazolines fused with imidazole,thiadiazole, pyrimidine and 1,3,5-triazine

5,8-Methanoquinazolines fused with imidazoles 4a-4b , thiadiazoles 5–6 , pyrimidines 7, 9, 11 and 12 , and 1,3,5-triazine 13 were prepared starting from (5R,8S)-2-amino-8,9,9-trimethyl-5,6,7,8-tetrahydro-5,8-methanoquinazoline 3 . Most compounds possessed central nervous system stimulant activities.     

Three bits eight states photochromic recording and nondestructive readout by using IR light

A photochromic polymer film containing three different diarylethene derivatives, that is, 1,2-bis(3,5-dimethyl-2-thienyl)perfluorocyclopentene (1), 1,2-bis(2,5-dimethyl-3-thienyl)perfluorocyclopentene (2), and 1,2-bis(2-methyl-5-phenyl-3-thienyl)perfluorocyclopentene (3) was prepared. Upon UV irradiation, the three derivatives changed to their closed-ring isomers having different colors, yellow, red, and blue. They showed different spectra not only in UV/Vis region but also in the IR spectral region. Upon irradiation with visible light of appropriate wavelengths, each closed-ring isomer was selectively bleached, and three bits eight states recording was performed. The eight states could be read out nondestructively by using IR light of appropriate wavenumbers.     

CASSCF and CASPT2 studies on the structures, transition energies, and dipole moments of ground and excited states for azulene

The electronic structure of azulene molecule has been studied. We have obtained the optimized structures of ground and singlet excited states by using the complete active space self-consistent-field (CASSCF) method, and calculated vertical and 0-0 transition energies between the ground and excited states with second-order M?ller-Plesset perturbation theory (CASPT2). The CASPT2 calculations indicate that the bond-equalized C(2v) structure is more stable than the bond-alternating C(s) structure in the ground state. For a physical understanding of electronic structure change from C(2v) to C(s), we have performed the CASSCF calculations of Duschinsky matrix describing mixing of the b(2) vibrational mode between the ground (1A(1)) and the first excited (1B(2)) states based on the Kekule-crossing model. The CASPT2 0-0 transition energies are in fairly good agreement with experimental results within 0.1-0.3 eV. The CASSCF oscillator strengths between the ground and excited states are calculated and compared with experimental data. Furthermore, we have calculated the CASPT2 dipole moments of ground and excited states, which show good agreement with experimental values.     

Role of the special pair in the charge-separating event in photosynthesis

We synthesized special-pair/electron-acceptor systems consisting of a complementary slipped cofacial dimer of imidazolyl-substituted zinc porphyrin, bearing pyromellitdiimide as the electron acceptor. In the case of the dimer, the first and second oxidation potentials were split into a total of four peaks in the differential pulse voltammetry measurement. Furthermore, the shift values of the first oxidation potentials obtained by changing the solvent polarity for the dimer were almost half of those observed for the monomer. These results indicate that the radical cation is delocalized over the whole pi system of the dimer. Time-resolved transient absorption measurements revealed that, relative to the corresponding monomer, the dimer accelerated the charge separation rate, but decelerated the charge recombination rate. The smaller reorganization energy of the slipped cofacial dimer relative to that of the monomeric system demonstrates the significance of the special-pair arrangement for efficient charge separation in photosynthesis.     

Total synthesis of (+/-)-stemodinone via an efficient ring-exchange strategy

A total synthesis of (+/-)-stemodinone, a tetracyclic stemodane diterpene, from the known tricyclic methyl olefin 11 is described. The key steps involve an efficient ring-exchange reaction and palladium(0)-catalyzed lactone migration. The ring-exchange strategy for controlling the stereochemistry was based on an initial Diels-Alder reaction to form a new ring followed by cleavage of the original ring. Cleavage of the original ring of the Diels-Alder adduct 9 was achieved by an initial regio- and chemoselective Baeyer-Villiger oxidation followed by the Pd(0)-catalyzed lactone-migration reaction reported by us.     

Anisotropic contributions in the ligand polarization model for the f-f transition probabilities of Eu(III) complexes

The intensities of the ΔM = ± 1 component of the ⁷f_o→ ⁵D₂ transition in D₃ complexes containing the [ EuO₉] cluster, and of other d-d or f-f transitions in D₃ complexes with the yz- and xz-components of the electric quadrupole as the leading moment, are found to be dependent upon the polarizability anisotropy of the ligands. The expectation is supported by determinations of the single-crystal absorption intensities of Na₃ [Eu(diglycollate)₃]·2NaClO₄·6H₂O and [Eu(H₂O)₉] (C₂H₅SO₄)₃.     

Medicinal foodstuffs. XVII. Fenugreek seed. (3): structures of new furostanol-type steroid saponins, trigoneosides Xa, Xb, XIb, XIIa, XIIb, and XIIIa, from the seeds of Egyptian Trigonellafoenum-graecum L

Six new furostanol-type steroid saponins called trigoneosides Xa, Xb, XIb, XIIa, XIIb, and XIIIa were isolated from the seeds of Egyptian Trigonella foenum-graecum L. (Leguminosae) together with six known furostanol-type steroid saponins: trigoneosides Ia, Ib, and Va, glycoside D, trigonelloside C, and compound C. The structures of trigoneosides Xa, Xb, Xlb, XIIa, Xllb, and XIIIa were determined on the basis of chemical and physicochemical evidence as 26-O-beta-D-glucopyranosyl-(25S)-5alpha-furostane-2alpha+ ++,3beta,22xi,26-tetraol 3-O-alpha-L-rhamnopyranosyl(1-->2)-,beta-D-glucopyranoside, 26-O-beta-D-glucopyranosyl-(25R)-5alpha-furostane-2 alpha,beta,22xi,26tetraol 3-O-alpha-L-rhamnopyranosyl(l -->2)-beta-D-glucopyranoside, 26-O-beta-D-glucopyranosyl-(25R)-5alpha-furostane2alpha++ +,beta,22xi,26-tetraol 3-O-beta-D-xylopyranosyl(l -->4)-beta-D-glucopyranoside, 26-O-beta-D-glucopyranosyl-(25S)-furost-4-ene-3beta,22xi,26- triol 3-O-Ca-L-rhamnopyranosyl(1-->2)-beta-D-glucopyranoside, 26-O-beta-D-glucopyranosyl-(25R)-furost-4-ene-3beta,22xi+ ++,26-triol 3-O-alpha-L-rhamnopyranosyl(1-->2)-beta-D-glucopyranoside, and 26-O-beta-D-glucopyranosyl(25S)-furost-5-ene-3beta,22xi,26-t riol 3-O-alpha-L-rhamnopyranosyl(1-->2)-beta-D-glucopyranosyl (1-->3)-beta-D-glucopyranosyl(1--4)]-beta-D-glucopyranoside, respectively.     

Effect of acidity on the extraction and kinetic stability of the copper(II)/APCD/IBMK system in strongly acidic media

The extraction of copper(II) from strongly acidic solution (0.01-8M hydrochloric acid) with ammonium 1-pyrrolidinecarbodithioate in isobutyl methyl ketone has been investigated. The shaking time needed for quantitative extraction decreases as the acidity is increased. The effect of the mutual solubility of the organic solvent and the aqueous phase is significant when the acidity of the aqueous phase is increased. The acidity of the aqueous phase mainly affects the kinetic stability of the chelate during the shaking period, rather than the decomposition of the chelating agent. The kinetic stability of the chelate apparently depends on the mole ratio of reagent to copper, the half-lives for the chelate extracted from 4M hydrochloric acid being 29.0, 40.0 and 85.0 min for reagent: metal mole ratios of 10, 100 and 1000, respectively.