Electronic and magnetic interactions in pi-stacked bisthiadiazinyl radicals

The preparation of two bisthiadiazinyls (7, R1 = Me, Et; R2 = Cl, R3 = Ph), the first examples of a new class of resonance-stabilized heterocyclic thiazyl radical, are reported. Both radicals have been characterized in solution by EPR spectroscopy and cyclic voltammetry, which confirm highly delocalized spin distributions and low electrochemical cell potentials, features which augur well for the use of these materials as building blocks for neutral radical conductors. In the solid state, the radicals are undimerized, crystallizing in slipped pi-stack arrays which ensure the availability of electrons as potential charge carriers. However, despite these favorable electrochemical and structural properties, both materials exhibit low conductivities, with sigma(300K) < 10-7 S cm-1, a result which can be rationalized in terms of their EHT band electronic structures, which indicate that intermolecular interactions lateral to the pi-stacks are limited. The materials are thus very 1-D with low bandwidths, so that a Mott insulating state prevails. When R1 = Me, the intermolecular overlap along the pi-stacks is weak and the material is essentially paramagnetic. When R1 = Et, intermolecular pi-overlap is greater and variable-temperature magnetic susceptibility measurements indicate a strongly antiferromagnetically coupled system, the behavior of which has been modeled in terms of a molecular-field modified 1-D Heisenberg chain of S = 1/2 centers. Broken-symmetry DFT methods have been used to estimate the magnitude of individual exchange interactions within both structures.     

Development of a database of gas chromatographic retention properties of organic compounds

A comprehensive database of gas chromatographic retention properties of chemical compounds has been developed using multiple literature sources. The National Institute of Standards and Technology (NIST) database of retention data for non-polar and polar stationary phases currently contains 292,924 data records for 42,888 compounds. The database includes data for Kováts indices, linear indices, Lee indices, retention times and retention volumes. The first release of this database for non-polar stationary phases is available with NIST/US Environmental Protection Agency (EPA)/National Institutes of Health (NIH) Mass Spectral Database (June 2005) and through the internet (NIST Chemistry WebBook). The paper describes the database and the process by which it has been compiled. The format of data presentation and the quality control procedures are described. Data sources of gas chromatographic retention data are also discussed.     

Syntheses of diaza-18-crown-6 ligands containing two units each of 4-hydroxyazobenzene,benzimidazole, uracil,anthraquinone, or ferrocene groups

Six new diaza-18-crown-6 ligands each containing two aromatic side arms with responsive functions were prepared. Diaza-18-crown-6 containing two 4-hydroxyazobenzene ( 3 ) or two 4 -hydroxy- 4′ -(dimethyl-amino)azobenzene ( 4 ) substituents were prepared via a one-pot Mannich reaction. Diaza-18-crown-6 containing two benzimidazole ( 5 ), two uracil ( 6 ) or two 9,10-anthraquinone ( 7 ) substituents were prepared by treating the diazacrown with the appropriate chloromethyl-containing compound. Reductive amination using sodium triacetoxyborohydride, diaza-18-crown-6 and ferrocenecarboxaldehyde was used to prepare bisferrocene-substituted diaza-18-crown-6 ( 8 ). Interactions of compounds 3 , 5 , and 6 with Na⁺, K⁺, Ba²⁺, Ag⁺, and Cu²⁺ were evaluated by a calorimetric titration technique at 25° in methanol. All three ligands form more stable complexes with Ag⁺ and Cu²⁺ ( 5 forms a precipitate with Ag⁺) than with Na⁺ and K⁺. Ligand 5 also forms a highly stable complex with Ba²⁺.     

The list colouring constants

We present a conjecture concerning list colourings and prove a weakened form of it. © 1999 John Wiley & Sons, Inc. J Graph Theory 31: 149–153, 1999     

Resonance stabilized bisdiselenazolyls as neutral radical conductors

An efficient and versatile synthetic route to resonance stabilized bisselenathiazolyl and bisdiselenazolyl radicals 3 and 4 is described. Structural analysis of 3 and 4 confirm that lattice and pi-delocalization energies are sufficient to offset solid-state dimerization of the radicals and that the two selenium-containing radicals are isostructural with the all-sulfur based system 1. Variable temperature conductivity measurements indicate that sequential replacement of sulfur by selenium leads to a progressive increase in conductivity and reduction in thermal activation energy.     

Isostructural bisdithiazolyl and bisthiaselenazolyl radicals: trends in bandwidth and conductivity

Reaction of N-alkylated pyridine-bridged bisdithiazolylium cations [1]+ (R1 =Me, Et; R2 =Ph) with selenium dioxide in acetic acid provides a one-step high-yield synthetic route to bisthiaselenazolylium cations [2]+ (R1 = Me, Et; R2 = Ph). The corresponding radicals 1 and 2 can be prepared by chemical or electrochemical reduction of the cations. Structural analysis of the radicals has been achieved by a combination of single-crystal and powder X-ray diffraction methods. While the two sulfur radicals 1 adopt different space groups (P3(1)21 for R1 = Me and P(-)1 for R1 = Et), the two selenium radicals 2 (space groups P3(1)21 for R1 = Me and P3(2)21 for R1 =Et) are isostructural with each other and also with 1 (R1 = Me, R2 = Ph). Variable-temperature magnetic measurements on all four compounds confirm that they are undimerized S = 1/2 systems, with varying degrees of weak intermolecular antiferromagnetic coupling. Variable-temperature electrical conductivity measurements on the two selenium radicals provide conductivities sigma(300 K) = 7.4 x 10-6 (R1 = Et) and 3.3 x 10-5 S cm-1 (R1 = Me), with activation energies, E(act), of 0.32 (R1 = Et) and 0.29 eV (R1 = Me). The differences in conductivity within the isostructural series is interpreted in terms of their relative solid-state bandwidths, as estimated from Extended Hückel band-structure calculations.     

"Orthogonal" separations for reversed-phase liquid chromatography

A general procedure is proposed for the rapid development of a reversed-phase liquid chromatographic (RP-LC) separation that is "orthogonal" to a pre-existing ("primary") method for the RP-LC separation of a given sample. The procedure involves a change of the mobile-phase organic solvent (B-solvent), the replacement of the primary column by one of very different selectivity, and (only if necessary) a change in mobile phase pH or the use of a third column. Following the selection of the "orthogonal" B-solvent, column and mobile phase pH, further optimization of peak spacing and resolution can be achieved by varying separation temperature and either isocratic %B or gradient time. The relative "orthogonality" of the primary and "orthogonal" RP-LC methods is then evaluated from plots of retention for one method versus the other. The present procedure was used to develop "orthogonal" methods for nine routine RP-LC methods from six pharmaceutical analysis laboratories. The relative success of this approach can be judged from the results reported here.     

The nature of the H3O+ hydronium ion in benzene and chlorinated hydrocarbon solvents. Conditions of existence and reinterpretation of infrared data

Salts of the C(3v) symmetric hydronium ion, H(3)O(+), have been obtained in the weakly basic solvents benzene, dichloromethane, and 1,2-dichloroethane. This is made possible by using carborane counterions of the type CHB(11)R(5)X(6)(-) (R = H, Me, Cl; X = Cl, Br, I) because they combine the three required properties of a suitable counterion: very low basicity, low polarizability, and high chemical stability. The existence of the H(3)O(+) ion requires the formation of three more-or-less equivalent, medium-to-strong H-bonds with solvent or anion bases. With the least basic anions such as CHB(11)Cl(11)(-), IR spectroscopy indicates that C(3v) symmetric trisolvates of formulation [H(3)O(+) .3Solv] are formed with chlorocarbon solvents and benzene, the latter with the formation of pi bonds. When the solvents and anions have comparable basicity, contact ion pairs of the type [H(3)O(+).nSolv.Carborane] are formed and close to C(3v) symmetry is retained. The conditions for the existence of the H(3)O(+) ion are much more exacting than previously appreciated. Outside of the range of solvent basicity bounded at the lower end by dichloromethane and the upper end by tributyl phosphate, and with anions that do not meet the stringent requirements of weak basicity, low polarizability of high chemical stability, lower symmetry species are formed. One H-bond from H(3)O(+) to the surrounding bases becomes stronger than the other two. The distortion from C(3v) symmetry is minor for bases weaker than dichloromethane. For bases stronger than tributyl phosphate, H(2)O-H(+)-B type species are formed that are more closely related to the H(5)O(2)(+) ion than to H(3)O(+). IR data allow criteria to be defined for the existence of the symmetric H(3)O(+) ion. This includes a linear dependence between the frequencies of nu(max)(OH) and delta(OH(3)) within the ranges 3010-2536 cm(-1) for nu(max)(OH) and 1597-1710 cm(-1) for delta(OH(3)). This provides a simple way to assess the correctness of the formulation of the proton state in monohydrated acids. In particular, the 30-year-old citation classic of the IR spectrum believed to arise from H(3)O(+) SbCl(6)(-) is re-interpreted in terms of (H(2)O)(x)().HSbCl(6) hydrates. The correctness of the hydronium ion formulation in crystalline H(3)O(+)A(-) salts (A(-) = Cl(-), NO(3)(-)) is confirmed, although, when A(-) is a fluoroanion, distortions from C(3)(v)() symmetry are suggested.     

Technical aspects and evaluation methodology for the application of two automated brain MRI tumor segmentation methods in radiation therapy planning

The purpose of this study was to design the steps necessary to create a tumor volume outline from the results of two automated multispectral magnetic resonance imaging segmentation methods and integrate these contours into radiation therapy treatment planning. Algorithms were developed to create a closed, smooth contour that encompassed the tumor pixels resulting from two automated segmentation methods: k-nearest neighbors and knowledge guided. These included an automatic three-dimensional (3D) expansion of the results to compensate for their undersegmentation and match the extended contouring technique used in practice by radiation oncologists. Each resulting radiation treatment plan generated from the automated segmentation and from the outlining by two radiation oncologists for 11 brain tumor patients was compared against the volume and treatment plan from an expert radiation oncologist who served as the control. As part of this analysis, a quantitative and qualitative evaluation mechanism was developed to aid in this comparison. It was found that the expert physician reference volume was irradiated within the same level of conformity when using the plans generated from the contours of the segmentation methods. In addition, any uncertainty in the identification of the actual gross tumor volume by the segmentation methods, as identified by previous research into this area, had small effects when used to generate 3D radiation therapy treatment planning due to the averaging process in the generation of margins used in defining a planning target volume.     

Integration of auditory and vibrotactile stimuli: effects of frequency

Perceptual integration of vibrotactile and auditory sinusoidal tone pulses was studied in detection experiments as a function of stimulation frequency. Vibrotactile stimuli were delivered through a single channel vibrator to the left middle fingertip. Auditory stimuli were presented diotically through headphones in a background of 50 dB sound pressure level broadband noise. Detection performance for combined auditory-tactile presentations was measured using stimulus levels that yielded 63% to 77% correct unimodal performance. In Experiment 1, the vibrotactile stimulus was 250 Hz and the auditory stimulus varied between 125 and 2000 Hz. In Experiment 2, the auditory stimulus was 250 Hz and the tactile stimulus varied between 50 and 400 Hz. In Experiment 3, the auditory and tactile stimuli were always equal in frequency and ranged from 50 to 400 Hz. The highest rates of detection for the combined-modality stimulus were obtained when stimulating frequencies in the two modalities were equal or closely spaced (and within the Pacinian range). Combined-modality detection for closely spaced frequencies was generally consistent with an algebraic sum model of perceptual integration; wider-frequency spacings were generally better fit by a Pythagorean sum model. Thus, perceptual integration of auditory and tactile stimuli at near-threshold levels appears to depend both on absolute frequency and relative frequency of stimulation within each modality.