Preparation and evaluation of solid-phase microextraction fibres based on functionalized latex nanoparticle coatings for trace analysis of inorganic anions

The use of a functionalized latex nanoparticle coating as a new sorbent phase for solid-phase microextraction (SPME) was examined. By means of electrostatic absorption onto ionized silanol groups, a fused-silica rod was coated with polymeric nanoparticles functionalized with quaternary ammonium groups. Optimum conditions for the preparation of the coated fibre are presented. The fibre was used for the extraction of a mixture of seven anions from water samples which are analysed by coupling the SPME fibre to an ion chromatographic system via a special interface. The results obtained proved the suitability of this novel coating as a new SPME fibre. A linear calibration for the target analytes was achieved over the concentration range from 5 μg L⁻¹ to 5 mg L⁻¹ (r² > 0.988), while limits of detection for these ions were all below 3.7 μg L⁻¹ (S/N = 3). The reproducibility of a single fibre (n = 4) under similar conditions was between 7 and 12%, while the fibre to fibre reproducibility (n = 5) was between 8.9 and 14%.     

Total synthesis of clathculins A and B

Clathculins A and B represent a new class of vic-diamine alkaloids containing a PA2 unit as the basic structure. We report the first total syntheses of 1 and 2, which confirm the assigned structure of each. Dependence of their NMR spectroscopic behavior as a function of protonation state has been observed.     

On the mechanisms involved in the recovery of envelope information from temporal fine structure

Three experiments were designed to provide psychophysical evidence for the existence of envelope information in the temporal fine structure (TFS) of stimuli that were originally amplitude modulated (AM). The original stimuli typically consisted of the sum of a sinusoidally AM tone and two unmodulated tones so that the envelope and TFS could be determined a priori. Experiment 1 showed that normal-hearing listeners not only perceive AM when presented with the Hilbert fine structure alone but AM detection thresholds are lower than those observed when presenting the original stimuli. Based on our analysis, envelope recovery resulted from the failure of the decomposition process to remove the spectral components related to the original envelope from the TFS and the introduction of spectral components related to the original envelope, suggesting that frequency- to amplitude-modulation conversion is not necessary to recover envelope information from TFS. Experiment 2 suggested that these spectral components interact in such a way that envelope fluctuations are minimized in the broadband TFS. Experiment 3 demonstrated that the modulation depth at the original carrier frequency is only slightly reduced compared to the depth of the original modulator. It also indicated that envelope recovery is not specific to the Hilbert decomposition.     

Nanosecond dynamics of ferroelectric/dielectric superlattices

The nanosecond response of a PbTiO(3)/SrTiO(3) ferroelectric/dielectric superlattice to applied electric fields is closely linked to the dynamics of striped domains of the remnant polarization. The intensity of domain satellite reflections observed with time-resolved x-ray microdiffraction decays in 5-100 ns depending on the magnitude of the electric field. The piezoelectric response of the superlattice within stripe domains is strongly suppressed due to electromechanical clamping between adjacent regions of opposite polarization. Regions of the superlattice that have been switched into a uniform polarization state by the applied electric field, however, exhibit piezoelectricity during the course of the switching process. We propose a switching model different from previous models of the switching of superlattices, based instead on a spatially heterogeneous transformation between striped and uniform polarization states.     

Ramanujan-type congruences for broken 2-diamond partitions modulo 3

The notion of broken k-diamond partitions was introduced by Andrews and Paule.Let△k(n)denote the number of broken k-diamond partitions of n.Andrews and Paule also posed three conjectures on the congruences of△2(n)modulo 2,5 and 25.Hirschhorn and Sellers proved the conjectures for modulo 2,and Chan proved the two cases of modulo 5.For the case of modulo 3,Radu and Sellers obtained an infinite family of congruences for△2(n).In this paper,we obtain two infinite families of congruences for△2(n)modulo 3 based on a formula of Radu and Sellers,a 3-dissection formula of the generating function of triangular number due to Berndt,and the properties of the U-operator,the V-operator,the Hecke operator and the Hecke eigenform.For example,we find that△2(243n+142)≡△2(243n+223)≡0(mod 3).The infinite family of Radu and Sellers and the two infinite families derived in this paper have two congruences in common,namely,△2(27n+16)≡△2(27n+25)≡0(mod 3).     

Introducing nonlinear,multivariate ‘Predictor Surfaces’ for quantitative modeling of chemical systems with higher-order,coupled predictor variables

Innovations in chemometrics are required for studies of chemical systems which are governed by nonlinear responses to chemical parameters and/or interdependencies (coupling) among these parameters. Conventional and linear multivariate models have limited use for quantitative and qualitative investigations of such systems because they are based on the assumption that the measured data are simple superpositions of several input parameters. ‘Predictor Surfaces’ were developed for studies of more chemically complex systems such as biological materials in order to ensure accurate quantitative analyses and proper chemical modeling for in-depth studies of such systems. Predictor Surfaces are based on approximating nonlinear multivariate model functions by multivariate Taylor expansions which inherently introduce the required coupled and higher-order predictor variables.     

Chemically modified cellulose micro- and nanofibrils as paper-strength additives

Chemically modified cellulose micro- and nanofibrils were successfully used as paper strength additives. Three different kinds of cellulose nanofibrils (CNFs) were studied: carboxymethylated CNFs, periodate-oxidised carboxymethylated CNFs and dopamine-grafted carboxymethylated CNFs, all prepared from bleached chemical fibres of dissolving grade, and one microfibrillated cellulose from unbleached kraft fibres. In addition to mechanical characterization of the final paper sheets the fibril retention, sheet density and sheet morphology were also studied as a function of addition of the four different cellulose fibrils. In general, the cellulose fibrils, when used as additives, significantly increased the tensile strength, Young’s modulus and strain-at-break of the paper sheets. The effects of the different fibrils on these properties were compared and evaluated and used to analyse the underlying mechanisms behind the strengthening effect. The strength-enhancing effect was most pronounced for the periodate-oxidised CNFs when they were added together with polyvinyl amine (PVAm) or poly(dimethyldiallylammonium chloride) (pDADMAC). The addition of periodate-oxidised CNFs, with pDADMAC as retention aid, resulted in a 37% increase in tensile strength at a 2 wt% addition and an 89% increase at a 15 wt% addition (from 67 to 92 and 125 kNm/kg, respectively) compared to a reference with only pDADMAC. Wet-strong sheets with a wet tensile index of 30 kNm/kg were also obtained when periodate-oxidised CNFs and PVAm were combined. This significant increase in wet strength is suggested to be the result of a formation of cross-links between the aldehyde groups, introduced by the periodate oxidation, and hydroxyl groups on the lignocellulosic fibres and the primary amines of PVAm. Even though less significant, there was also an increase in wet tensile strength when pDADMAC was used together with periodate-oxidised fibrils which shows that the aldehyde groups are able to increase the wet strength without the presence of the primary amines of the PVAm. As an alternative method to strengthen the fibre network, carboxymethylated CNFs grafted with dopamine, by an ethyl dimethylaminopropyl carbodiimide coupling, were used as a strength additive. When used as an additive, these CNFs showed a strong propensity to form films on and around the fibres and significantly increased the mechanical properties of the sheets. Their addition resulted in an increase in the Young´s modulus by 41%, from 5.1 to 7.2 GPa, and an increase in the tensile strength index of 98% (from 53 to 105 kNm/kg) with 5 wt% retained dopamine-grafted CNFs.