Preparation and characterization of activated carbon from pine cone by microwave-induced ZnCl2 activation and its effects on the adsorption of methylene blue

In this work, activated carbon prepared from pine cone (PCAC) with ZnCl₂ as an activation agent under microwave radiation was investigated. The activation step was performed at the microwave input power of 400 W and radiation time of 5 min. The properties of activated carbon were characterized by N₂ adsorption Brunauer–Emmett–Teller (BET), scanning electron microscopy and Fourier transform infrared spectroscopy. Results showed that the BET surface area, Langmuir surface area, and total pore volume of PCAC were 939, 1,486 m²/g and 0.172 cm³/g, respectively. Adsorption capacity was demonstrated by the iodine numbers. The adsorptive property of PCAC was tested using methylene blue dye. Equilibrium data was best fitted by the Langmuir isotherm model, showing a monolayer adsorption capacity of 60.97 mg/g. The pseudo-first- and pseudo-second-order kinetic models were examined to evaluate the kinetic data, and the rate constants were calculated. Adsorption of the dyes followed pseudo-first order kinetics. Thermodynamic parameters such as free energy, enthalpy and entropy of dye adsorption were obtained.     

Carboxymethylcellulose (CMC)–hydroxyethylcellulose (HEC) based hydrogels: synthesis and characterization

A novel carboxymethylcellulose (CMC)–hydroxyethylcellulose (HEC)-based hydrogel with sensitivity to environmental changes, pH and salts was synthesized by using fumaric acid and malic acid at various concentrations. Water uptake capacity of hydrogels was investigated in distilled water, various salt and pH solutions. From pH-dependent studies, it was found that greater water uptake values were observed at greater pH values (7.4), and reversible pH responsiveness of CMC–HEC based hydrogels was obtained. Decreasing the water uptake capacity with increasing of the charge of the metal cation (Al³⁺ < Ca²⁺ < Na⁺) demonstrated metal ion responsiveness of CMC–HEC-based hydrogels. From tensile tests of the hydrogels, a greater crosslinker concentration led to greater tensile strength values. Thermogravimetric analysis and scanning electron microscopy images were used to determine the thermal stability and to observe morphological properties of the samples, respectively.     

Ultrasound-assisted ozone bleaching of cotton

In this study, the effects of ultrasound on ozone treatment processes for bleaching cotton fabrics were investigated and compared with the conventional hydrogen peroxide bleaching process (60 °C over 90 min). Two ultrasonic + ozone treatments of cotton fabric samples were carried out: (1) ozone in an ultrasonic homogenizer (UH) and (2) ozone in an ultrasonic bath. Ozone dosages, temperature and time variations were determined with both ozone-ultrasonic bleaching processes. Whiteness, yellowness, weight, tensile strength properties, FTIR (ATR) spectra and visual appearance, via scanning electron microscopy of treated cotton fabrics as well as chemical oxygen demand (COD) of bleaching effluents, were investigated. It was concluded that the ozone + UH process, conducted for 30 min at 30 °C, produced closely equivalent values of cotton fabric whiteness and yellowness to the classic peroxide bleaching process, with slightly less weight loss, dramatically less COD in the process effluent (29 mg/l for ozone-UH vs. 4,316 mg/l for classical peroxide treatment), and without causing any adverse and/or detrimental effects on loss of fabric strength or elongation of the cotton fabrics. The ozone-UH process also leads to time and energy savings with much less environmental impact. Consequently, the combination of ozonation plus UH carried out at 30 °C over 30 min can be used successfully for cotton bleaching instead of the classic hydrogen peroxide bleaching process.     

Improvements of Tolerance to Stress Conditions by Genetic Engineering in Saccharomyces Cerevisiae during Ethanol Production

Saccharomyces cerevisiae, industrial yeast isolate, has been of great interest in recent years for fuel ethanol production. The ethanol yield and productivity depend on many inhibitory factors during the fermentation process such as temperature, ethanol, compounds released as the result of pretreatment procedures, and osmotic stress. An ideal strain should be able to grow under different stress conditions occurred at different fermentation steps. Development of tolerant yeast strains can be achieved by reprogramming pathways supporting the ethanol metabolism by regulating the energy balance and detoxicification processes. Complex gene interactions should be solved for an in-depth comprehension of the yeast stress tolerance mechanism. Genetic engineering as a powerful biotechnological tool is required to design new strategies for increasing the ethanol fermentation performance. Upregulation of stress tolerance genes by recombinant DNA technology can be a useful approach to overcome inhibitory situations. This review presents the application of several genetic engineering strategies to increase ethanol yield under different stress conditions including inhibitor tolerance, ethanol tolerance, thermotolerance, and osmotolerance.     

Electrochemical investigation of a schiff base synthesized by cinnamaldehyde as corrosion inhibitor on mild steel in acidic medium

The inhibiting effect of (NE)-4-phenoxy-N-(3-phenylallylidene) aniline (PAC) on the corrosion of mild steel in 1.0 M HCl has been studied by electrochemical impedance spectroscopy, and Tafel polarization measurements. The corrosion rate was also calculated theoretically in terms of mm per year and mil per year, using current density values of mild steel in 1.0 M HCl medium. It was found that PAC has a remarkable inhibition efficiency on the corrosion of mild steel especially at high temperatures. The values of E _a obtained in presence of a Schiff base were found to be lower than those obtained in the inhibitor-free solution. The increase of inhibition efficiency percent with temperature increase was associated with the transformation of physical adsorption into chemical adsorption. The thermodynamic functions of adsorption processes have been evaluated and discussed at each temperature. Scanning electron microscope observations of the electrode surface confirmed the existence of a protective adsorbed film of the inhibitor on the electrode surface.     

Synthesis of nanometric β-barium metaborate powder from different borate solutions by ultrasound-assisted precipitation

In this study, the synthesis of barium metaborate powder (BaB₂O₄) was carried out by ultrasound-assisted precipitation using different borate solutions. Different solutions such as borax (Na₂B₄O₇, BD), boric acid (H₃BO₃, BA), and sodium metaborate (NaBO₂, SMB) were used in the synthesis and an ultrasonic immersion horn probe was used as the major source of ultrasound. The effect of reaction temperature and time, pH, and crystallization time on the BaB₂O₄ yield (%) was investigated. The ultrasound-assisted synthesis up to 90 % yield could be achieved using a 0.2 M BD solution at 80 °C, reacting for 5 min at pH 13 followed by 2 h of crystallization. Following crystallization, the obtained powder was heated up to 140, 250, 650, and 750 °C for 2.5 h, and it was shown that β-BaB₂O₄ nanometric powders were obtained after the 750 °C heat treatment.     

Inhibitor design for 3-hydroxy-3-methyl-glutaryl-CoA reductase enzyme; molecular docking and determination of molecular and electronic properties of ligands by density functional theory method

Designing new inhibitors having less side effects is a need which also could reduce cholesterol levels. To fulfill this aim, we have carried out a molecular docking study toward 3-hydroxy-3-methyl-glutaryl-CoA (HMG-CoA) reductase. A set of designed structural derivatives of statin drugs, eight ligands which are used as HIV-1 integrase inhibitor candidates, a set of terpenoids, and ligands downloaded from Zinc15 database were docked to HMG-CoA reductase enzyme which contains atorvastatin in crystal structure. The analysis of docking studies revealed that statin derivative ligands are more appropriate for inhibition of HMG-CoA reductase. To define the contribution of the molecular properties to the binding of ligands to enzyme structure; the highest occupied molecular orbitals-lowest unoccupied molecular orbitals, hardness, electronegativity, and chemical potential properties of ligands have best score in their sets calculated by quantum mechanical tools.     

Synthesis and monoamine oxidase A/B inhibitory evaluation of new benzothiazole-thiazolylhydrazine derivatives

Abstract

In this study, a novel series of benzothiazole-thiazolylhydrazine (3a–3i) was synthesized and their structures were characterized by ¹H-NMR, ¹³C-NMR spectrometry, and mass spectroscopy. These compounds were evaluated as inhibitors of type A and type B monoamine oxidase (MAO) enzymes. The most active compound 3b (2-((2-(2-(4-(4-Nitrophenyl)thiazol-2-yl)hydrazineylidene)-2-phenylethyl)thio)benzothiazole) showed strong inhibitory activity at hMAO-A (IC₅₀ of 0.095?±?0.004?µM). Furthermore, compound 3i (2-((2-(2-(4-(2,4-dichlorophenyl)thiazol-2-yl)hydrazineylidene)-2-phenylethyl)thio)benzothiazole) showed significant inhibition profile on hMAO-A with the IC₅₀ values 0.141?±?0.006?µM.     

Phenylalanine-Based AMPA Receptor Antagonist as the Anticonvulsant Agent with Neuroprotective Activity—In Vitro and In Vivo Studies

Trying to meet the multitarget-directed ligands strategy, a series of previously described aryl-substituted phenylalanine derivatives, reported as competitive antagonists of α-amino-3-hydroxy-5-methyl-4-isoxazolepropionic acid (AMPA) receptors, were screened in vitro for their free-radical scavenging and antioxidant capacity in two different assays: ferric reducing antioxidant power (FRAP) and oxygen radical absorbance capacity fluorescent (ORAC-FL) assays. The most active antioxidants 1 and 8 were further examined to evaluate their neuroprotective properties in vitro. In this study, compound 1 showed a significant neuroprotective effect against the neurotoxin 6-hydroxydopamine in neuroblastoma SH-SY5Y and IMR-32 cell lines. Both compounds also showed prevention from high levels of reactive oxygen species (ROS) in SH-SY5Y cells. Furthermore, the desired monoamine oxidase B (MAO-B) inhibition effect (IC₅₀ = 278 ± 29 nM) for 1 was determined. No toxic effects up to 100 µM of 1 and 8 against neuroblastoma cells were observed. Furthermore, in vivo studies showed that compound 1 demonstrated significant anticonvulsant potential in 6-Hz test, but in neuropathic pain models its antiallodynic and antihyperalgesic properties were not observed. Concluding, the compound 1 seems to be of higher importance as a new phenylalanine-based lead candidate due to its confirmed promise in in vitro and in vivo anticonvulsant activity.     

Synthesis,characterization, and application of silver nanoparticle‐thiophenol nanocomposite film on the glassy carbon surface

In this study, 4‐thiophenol modified glassy carbon electrode was prepared by the reduction of 4‐diazothiophenol tetrafluoroborate salt. Silver nanoparticles were attached to the thiophenol modified surface to prepare a thiophenol‐silver nanoparticle composite film. 4‐Aminothiopenol molecules were deposited by self‐assembling technique to form multi‐layered nanofilms of TP/SNP/PhNH₂ on glassy carbon substrate. These surfaces were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, X‐ray photoelectron spectroscopy, reflectance‐absorption infrared spectroscopy, and ellipsometry at each multilayer film growth process. Atomic force microscopic images of GC/TP/SNP/PhNH₂ surfaces were also acquired. The characterization methods show that the amine group containing surface permits the subsequent modification by a variety of coupling reactions for the immobilization of more complex systems. An application of the electrode modification for the determination of uric acid with a significantly lower detection limit is described. Copyright © 2013 John Wiley & Sons, Ltd.