Ruthenium-catalyzed azide-alkyne cycloaddition: scope and mechanism

The catalytic activity of a series of ruthenium(II) complexes in azide-alkyne cycloadditions has been evaluated. The [Cp*RuCl] complexes, such as Cp*RuCl(PPh 3) 2, Cp*RuCl(COD), and Cp*RuCl(NBD), were among the most effective catalysts. In the presence of catalytic Cp*RuCl(PPh 3) 2 or Cp*RuCl(COD), primary and secondary azides react with a broad range of terminal alkynes containing a range of functionalities selectively producing 1,5-disubstituted 1,2,3-triazoles; tertiary azides were significantly less reactive. Both complexes also promote the cycloaddition reactions of organic azides with internal alkynes, providing access to fully-substituted 1,2,3-triazoles. The ruthenium-catalyzed azide-alkyne cycloaddition (RuAAC) appears to proceed via oxidative coupling of the azide and alkyne reactants to give a six-membered ruthenacycle intermediate, in which the first new carbon-nitrogen bond is formed between the more electronegative carbon of the alkyne and the terminal, electrophilic nitrogen of the azide. This step is followed by reductive elimination, which forms the triazole product. DFT calculations support this mechanistic proposal and indicate that the reductive elimination step is rate-determining.     

Expanding the number of phthalates monitored in house dust

Phthalates have been used as plasticisers for several decades in various industry and consumer products. A method was developed for the determination of 13 not commonly monitored phthalates in household dust. The method was based on solvent extraction using sonication, sample clean-up by solid phase extraction (SPE), and analysis using isotope dilution gas chromatography-tandem mass spectrometry (GC/MS/MS). The method was applied to the analysis of dust samples collected using two vacuum sampling techniques from 38 urban Canadian homes: a sample of fresh or ‘active’ dust (FD) collected by technicians and a composite sample taken from the household vacuum cleaner (HD). Spearman rank correlations between HD and FD samples were significant for six phthalates with median concentrations above their method detection limits (MDLs), suggesting that the HD samples provide comparable results with FD samples. Seven phthalates were detected and quantified in a Canada-wide set of 126 household dust samples, among which six phthalates were detected at frequencies higher than 87%, with median (range) concentrations of 1.9 (<0.42–240) (μg/g) for diisohexyl phthalate (DIHxP), 3.8 (<0.16–260) (μg/g) for di-n-heptyl phthalate (DHepP), 6.6 (<1.1–1170) (μg/g) for diisooctyl phthalate (DIOP), 1.1 (<0.12–390) (μg/g) for di-n-octyl phthalate (DOP), 6.3 (<0.16–430) (μg/g) for dinonyl phthalate (DNP), and 1.8 (<0.18–850) (μg/g) for di-n-decyl phthalate (DDP). High detection frequencies and widely scattered concentration levels of these phthalates in this preliminary set of 126 samples suggested a high variability in potential exposure to phthalates in Canadian homes. NIST SRM 2585 (organic contaminants in house dust) was also analysed; eight phthalates were detected, with concentrations ranging from 6.0 μg/g for DOP to 79 μg/g for DIHxP. The results from SRM 2585 may contribute to the certification of phthalate concentration values in this SRM.     

Simulation of flux during electro-membrane extraction based on the Nernst-Planck equation

The present work has for the first time described and verified a theoretical model of the analytical extraction process electro-membrane extraction (EME), where target analytes are extracted from an aqueous sample, through a thin layer of 2-nitrophenyl octylether immobilized as a supported liquid membrane (SLM) in the pores in the wall of a porous hollow fibre, and into an acceptor solution present inside the lumen of the hollow fibre by the application of an electrical potential difference. The mathematical model was based on the Nernst-Planck equation, and described the flux over the SLM. The model demonstrated that the magnitude of the electrical potential difference, the ion balance of the system, and the absolute temperature influenced the flux of analyte across the SLM. These conclusions were verified by experimental data with five basic drugs. The flux was strongly dependent of the potential difference over the SLM, and increased potential difference resulted in an increase in the flux. The ion balance, defined as the sum of ions in the donor solution divided by the sum of ions in the acceptor solution, was shown to influence the flux, and high ionic concentration in the acceptor solution relative to the sample solution was advantageous for high flux. Different temperatures also led to changes in the flux in the EME system.     

Extrapolation methods for approximating arc length and surface area

A well-known method of estimating the length of a parametric curve in is to sample some points from it and compute the length of the polygon passing through them. In this paper we show that for uniform sampling of regular smooth curves, Richardson extrapolation can be applied repeatedly giving a sequence of derivative-free length estimates of arbitrarily high orders of accuracy. A similar result is derived for the approximation of the area of parametric surfaces.      

Gas‐free initiators for high‐temperature free‐radical polymerization

Quaternary ammonium persulfates as free‐radical initiators for high‐temperature polymerization are synthesized and their shelf‐life stability investigated. These initiators do not have gaseous byproducts and are therefore ideal for frontal polymerization, a process in which polymeric materials are produced via a thermal front that propagates through the unreacted monomer/initiator solution. Quaternary ammonium persulfate initiators offer additional qualities such as high solubility in organic media and low volatility, which are desirable for frontal polymerization. The initiators are synthesized using two procedures, and the initiating efficacy of the respective products is compared to a peroxide initiator in the frontal polymerization of 1,6‐hexanediol diacrylate. Of all the quartenary ammonium persulfates synthesized, tricaprylmethylammonium (Aliquat) persulfate (APSO) is the best initiator for frontal polymerization because it is soluble in organic media, is very reactive, and does not produce volatile byproducts under decomposition. A study of the decomposition kinetics of APSO is performed, and frontal polymerization is proposed as a quicker analytical technique to assay the purity. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3984–3990, 2000     

Isotopic abundance measurements on solid nuclear-type samples by glow discharge mass spectrometry

A double-focusing Glow Discharge Mass Spectrometer (GDMS) installed in a glovebox for nuclear sample screening has been employed for isotopic measurements. Isotopic compositions of zirconium, silicon, lithium, boron, uranium and plutonium which are elements of nuclear concern have been determined. Interferences arising from the matrix sample and the discharge gas (Ar) for each of these elements are discussed. The GDMS results are compared with those from Thermal Ionization Mass Spectrometry (TIMS). For boron and lithium at g/g-ng/g levels, the two methods gave results in good agreement. In samples containing uranium the isotopic composition obtained by GDMS was in agreement with those from TIMS independently of the enrichment. Attempts for the determination of plutonium isotopic composition were also made. In this case, due to the interferences of uranium at mass 238 and americium at mass 241, the GDMS raw data are complementary with those values obtained from physical non-destructive techniques.     

Fe-contacts on InAs(100) and InP(100) characterised by conversion electron Mössbauer spectroscopy

We have grown 4 nm thin films of ⁵⁷Fe on InAs(100) and InP(100) surfaces by use of MBE and studied the samples by ⁵⁷Fe conversion electron Mössbauer spectroscopy. In the case of InAs, the Mössbauer spectrum showed a sextet due to α-Fe and a further magnetically split component with slightly smaller hyperfine field, which is attributed to interface components. This result indicates that there is a relatively sharp interface between Fe and InAs. On the contrary, the spectrum of the InP sample showed a sextet with very broad lines and a smaller average hyperfine field. This suggests a strong chemical reaction between iron and the substrate, which results in the formation of a poorly crystalline phase.     

Quantification of 31 illicit and medicinal drugs and metabolites in whole blood by fully automated solid-phase extraction and ultra-performance liquid chromatography–tandem mass spectrometry

An efficient method for analyzing illegal and medicinal drugs in whole blood using fully automated sample preparation and short ultra-high-performance liquid chromatography–tandem mass spectrometry (MS/MS) run time is presented. A selection of 31 drugs, including amphetamines, cocaine, opioids, and benzodiazepines, was used. In order to increase the efficiency of routine analysis, a robotic system based on automated liquid handling and capable of handling all unit operation for sample preparation was built on a Freedom Evo 200 platform with several add-ons from Tecan and third-party vendors. Solid-phase extraction was performed using Strata X-C plates. Extraction time for 96 samples was less than 3 h. Chromatography was performed using an ACQUITY UPLC system (Waters Corporation, Milford, USA). Analytes were separated on a 100 mm?×?2.1 mm, 1.7 μm Acquity UPLC CSH C₁₈ column using a 6.5 min 0.1 % ammonia (25 %) in water/0.1 % ammonia (25 %) in methanol gradient and quantified by MS/MS (Waters Quattro Premier XE) in multiple-reaction monitoring mode. Full validation, including linearity, precision and trueness, matrix effect, ion suppression/enhancement of co-eluting analytes, recovery, and specificity, was performed. The method was employed successfully in the laboratory and used for routine analysis of forensic material. In combination with tetrahydrocannabinol analysis, the method covered 96 % of cases involving driving under the influence of drugs. The manual labor involved in preparing blood samples, solvents, etc., was reduced to a half an hour per batch. The automated sample preparation setup also minimized human exposure to hazardous materials, provided highly improved ergonomics, and eliminated manual pipetting.

Advancing Mathematical Activity: A Practice-Oriented View of Advanced Mathematical Thinking

The purpose of this article is to contribute to the dialogue about the notion of advanced mathematical thinking by offering an alternative characterization for this idea, namely advancing mathematical activity. We use the term advancing (versus advanced) because we emphasize the progression and evolution of students' reasoning in relation to their previous activity. We also use the term activity, rather than thinking. This shift in language reflects our characterization of progression in mathematical thinking as acts of participation in a variety of different socially or culturally situated mathematical practices. For these practices, we emphasize the changing nature of students' mathematical activity and frame the process of progression in terms of multiple layers of horizontal and vertical mathematizing.