Solid‐state NMR as a tool to describe and quantify the morphology of photoactive layers used in plastic solar cells

The optimization and control of the nanomorphology of thin films used as active layer in bulk heterojunction (BHJ) plastic solar cells is of key importance for a better understanding of the photovoltaic mechanisms and for increasing the device performances. Hereto, solid‐state NMR relaxation experiments have been evaluated to describe the film morphology of one of the “work‐horse” systems poly(2‐methoxy‐5‐(3′,7′‐dimethyloctyloxy)‐1,4‐phenylene‐vinylene)/[6, 6]‐phenyl‐C₆₁butyric acid methyl ester (MDMO‐PPV/PCBM) in a quantitative way. Attention is focused on the influence of the processing solvent (toluene vs. chlorobenzene), the blend composition, and the casting technique, that is, spin coating versus doctor blading. It is demonstrated that independently of the solvent and casting technique, part of the PCBM becomes phase separated from the mixed phase. Whereas casting from toluene results in the development of well‐defined PCBM crystallites, casting from chlorobenzene leads to the formation of PCBM‐rich domains that contain substructures of weakly organized PCBM nanoclusters. The amount and physico‐chemical state of the phase separated PCBM is quantified by solid‐state NMR relaxation times experiments. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Analysis of minor flavonoids in Piper hostmannianum var. berbicense using liquid chromatography coupled with atmospheric pressure chemical ionization mass spectrometry

The fragmentations of hydroxylated flavanones, chalcones and dihydrochalcones were investigated by direct loop injection using an ion trap mass spectrometry equipped with atmospheric pressure chemical ionization (APCI) probe. Some of them have been isolated from the leaves of Piper hostmannianum var. berbicense and standards were used to confirm their fragmentation behaviour. In negative ion mode, fragmentations of these three types of flavonoids revealed specific diagnostic ions which allowed us to identify aglycones in a crude plant extract. The major fragment ion obtained in MS/MS experiment for methoxylated chalcones is the neutral loss of a methyl radical whereas a H(2)O molecule is lost in the case of methoxylated dihydrochalcones. Methoxylated chalcones and flavanones isomers could be differentiated by the relative intensity ratio of [M-H-CH(3)]*(-) and [M-H-C(2)H(2)O](-) ions. Based on UV and MS data, a decision tree that includes UV lambda(max) absorptions and MS/MS diagnostic ions was built in order to obtain structural information of unknown compounds present in the extract. This tree was used to identify flavonoids in the ethyl acetate extract of P. hostmannianum var. berbicense leaves after analysis by high-performance liquid chromatography-diode array detection-atmospheric pressure chemical ionization ion trap multistage mass spectrometry. A total of 11 flavonoids were tentatively characterized based on the MS fragmentations pattern observed in MS(n) experiments.     

An experimental design based strategy to optimize a capillary electrophoresis method for the separation of 19 polycyclic aromatic hydrocarbons

Because of their high toxicity, international regulatory institutions recommend monitoring specific polycyclic aromatic hydrocarbons (PAHs) in environmental and food samples. A fast, selective and sensitive method is therefore required for their quantitation in such complex samples. This article deals with the optimization, based on an experimental design strategy, of a cyclodextrin (CD) modified capillary zone electrophoresis separation method for the simultaneous separation of 19 PAHs listed as priority pollutants. First, using a central composite design, the normalized peak-start and peak-end times were modelled as functions of the factors that most affect PAH electrophoretic behavior: the concentrations of the anionic sulfobutylether-β-CD and neutral methyl-β-CD, and the percentage of MeOH in the background electrolyte. Then, to circumvent computational difficulties resulting from the changes in migration order likely to occur while varying experimental conditions, an original approach based on the systematic evaluation of the time intervals between all the possible pairs of peaks was used. Finally, a desirability analysis based on the smallest time interval between two consecutive peaks and on the overall analysis time, allowed us to achieve, for the first time in CE, full resolution of all 19 PAHs in less than 18 min. Using this optimized capillary electrophoresis method, a vegetable oil was successfully analyzed, proving its suitability for real complex sample analysis.     

Dispersion and attenuation of the eigenwaves for light propagation in heiicoidal liquid crystals

The dispersion curves and attenuation factors of the Bloch eigenwaves in heiicoidal liquid crystals (chiral smectic C and cholesterics) are calculated using the 4 × 4 characteristic matrix method. Four possible types of eigenmodes are seen to exist in the medium. The reflection peaks, which correspond to odd parts of the full pitch, are total reflection peaks, while those corresponding to even parts of the full pitch are composed of three branches at high incidence angles, where the outer branches are selective reflection and the central one is a total reflection peak. Selective reflection regions occur only at the edges of the Brillouin zones, while total reflections can occur anywhere inside the zones. The former are interpreted according to the coupled mode theory as resonant Bragg reflections, with the latter as exchange Bragg reflections. When the tilt direction exceeds the propagation direction, the central branch of the even sequence of peaks starts to be due to resonant Bragg reflections. The first order peak for cholesterics becomes strongly structured at large incidence angles.     

Quantum size effect driven structure modifications of Bi films on Ni(111)

The quantum-size effect (QSE) driven growth of Bi film structures on Ni(111) was studied in situ using low energy electron microscopy and selective area low energy electron diffraction (μLEED). Domains with a (3×3), [(3)(1)(-1)(2)], and (7×7) film structure are found with a height of 3, 5, and 7 atomic layers, respectively. A comparison of I/V-μLEED curves with tensor LEED calculations shows perfectly accommodated Fermi wavelengths, indicative that not only the quantized height, but also the film structure is driven by QSE.     

The effect of functionalization on structure and electrical conductivity of multi-walled carbon nanotubes

Nanosized powders of Ti-Nb oxide core-shell nanocrystals with atomic ratios of Nb/Ti = 0.11, 0.25, and 0.38 have been prepared by two preparation routes. The first route was co-precipitation, followed by␣annealing, using NbCl₅ as a source of Nb. The second route was coating of pure TiO₂ nanocrystals by Nb-isopropoxide in liquid medium, followed by impregnation of the Nb into the nanoparticles by annealing. Both methods yielded anatase nanocrystals with a Nb-rich shell and a core, which had much lower Nb loadings. The anatase structure solid solution (with Nb incorporated) was stable under annealing up to 760°C. The particle size remained within the nanometric scale (<50 nm) under heat-treatment up to 760°C. It has been shown that the fabricated powders can be redispersed in aqueous media by simple ultrasound treatment, resulting in nanosized dispersions. Using a variety of analytical techniques, including depth profiling of single nanocrystallites by AES combined with sputtering by Ar ions, the mechanism of the core-shell structure creation was studied. It is proposed that the formation of the core-shell structure is governed by solubility limitations in the co-precipitation route and by solubility and diffusion limitations in the coating-incorporation route.     

Marfan syndrome in Europe

OBJECTIVES: Marfan syndrome (MFS) is a relatively frequent systemic connective tissue disorder with an important physical morbidity and mortality. The influences of MFS on physical problems, perception of severity, and impact on the quality of life and psychosocial well-being have been studied only limitedly. The aim of this study was to assess the association between the severity derived from the reported symptoms and subjectively experienced severity of MFS (expressed as a global judgment), with special emphasis regarding impact on relationships and pregnancies, psychosocial adjustment, and differences between the seven European countries. METHODS: A questionnaire designed specifically for this study and translated in each of the native languages was sent to 2,080 members of one of the patient support groups in Belgium, Denmark, France, Germany, The Netherlands, Switzerland, and the United Kingdom. 857 MFS patients of 13 years and older completed the questionnaire and were included in the data analysis. RESULTS: Physical impairments were scored by perception of severity of physical symptoms by the patients (physical severity perception score) and by their perception of the influence of MFS on their life (subjective severity score). Main discrepancy between physical severity perception and subjective severity score was the higher percentage of patients scoring in physical severity perception as severe (53.5%) compared to subjectively severe (26.5%). 61% of those who scored on the physical severity score as severely affected were designated as being mildly-moderately affected on subjective scoring. Both severity scores increased significantly with age. Two hundred-twenty women have carried 430 pregnancies (1.95 pregnancies/woman), with cardiovascular complications in 1.6%. Prenatal studies for MFS were rejected by 7.6% of MFS patients of 25 years and older, 33.6% were undecided, and 48.5% favored prenatal diagnosis for MFS if available. A positive general self-image was reported by 91.5% of patients. However, more than 90% stated that MFS had a negative influence on their sexual relationships, which they ascribed to negative perception of their body image. CONCLUSIONS: MFS has significant impact on daily life activities, but the majority of patients come to terms with their condition. Acceptance is mainly determined by subjective severity, and less by physical symptoms as reported by the patients themselves. It is important to stimulate a positive attitude towards MFS.