Collision-induced dissociation of alkali metal cationized and permethylated oligosaccharides: Influence of the collision energy and of the collision gas for the assignment of linkage position

Tandem mass spectrometry has been used to study the collision-induced decomposition of [M+Na]⁺ ions of permethylated oligosaccharides. It is shown that many linkage positions in one compound may be determined by the presence or absence, in a single spectrum, of specific fragment ions that arise from the cleavage of two ring bonds and that the yield of such ions depends strongly on the collision energy and nature of the collision gas. In contrast to the behavior of monolithiated native oligosaccharides, the collision-induced decomposition of the sodiated and permethylated oligosaccharide samples at low energy leads to preferential cleavage of glycosidic linkages. At high collision energies, the fragment ions formed by cleavage of more than one bond are greatly enhanced, especially when helium is replaced by argon as the collision gas. Furthermore, argon is the more efficient collision gas in inducing fragmentation of the precursor ions. As an example of the application of this method, the discrimination between the 1 → 3 and 1 → 6-linked mannose residues in the common core of N-glycans is described.     

Oxide-free oxygen incorporation into Ru(0001)

A smooth Ru(0001) surface prepared under ultra-high vacuum conditions has been loaded with oxygen under high-pressure (p approximately 1 bar) and low-temperature (T < 600 K) conditions. Oxygen phases created in this way have been investigated by means of thermal desorption spectroscopy, low-energy electron diffraction, and ultraviolet photoelectron spectroscopy. The exposure procedures applied lead to oxygen incorporation into the subsurface region without creation of RuO2 domains. For oxygen exposures ranging from 10(11) to 10(14) L oxygen contents up to about 4 monolayer equivalent could be achieved. The oxygen incorporation is thermally activated. The CO oxidation reaction conducted at mild temperatures (T < 500 K) at a sample loaded with subsurface oxygen reaches CO --> CO2 conversion probabilities of 10(-3).     

A Convenient Preparation of β-Acetamido Substituted Tryptamine Derivatives

Summary. In view of finding new 5-HT₆ receptor ligands various -acetamido substituted tryptamine and N,N-dimethyltryptamine derivatives were synthesized from a common intermediate. A trimolecular condensation between indole, Meldrums acid and N-phthalimidoacetaldehyde followed by careful deprotection and functional group manipulations were proposed for this purpose.Present address: GEVSM, UMR 7565 CNRS-UHP, Faculté de Pharmacie, F-54001 Nancy Cedex, FrancePresent address: University of Global and National Economy, Studentski Grad Christo Botev, BG-1700 Sofia, Bulgaria     

Fluorescence probing investigation of the mechanism of formation of MSU-type mesoporous silica prepared in fluoride medium

The mechanism of formation of a MSU-type siliceous material from tetraethyl orthosilicate (TEOS) in the presence of the nonionic surfactant tergitol T-15-S-12, sulfuric acid, and sodium fluoride has been investigated using mainly fluorescence probing techniques and, to a lesser extent, dynamic light scattering (DLS) and 29Si NMR spectroscopy. The tergitol micelles present in the systems obtained by progressively generating the reaction mixture giving rise to the mesostructured material by adding to an appropriate tergitol solution sulfuric acid, TEOS, and NaF were characterized by fluorescence probing (micelle aggregation number, micropolarity, and microviscosity) and also by dynamic light scattering (apparent micelle diameter). 29Si NMR experiments were also performed on selected systems after hydrolysis of the TEOS. The fluorescence probing techniques were also used to follow the changes of micelle characteristics with time during the evolution of the full reaction mixture from a limpid solution to a system containing a minor amount of condensed siliceous material. The synthesized solid material was characterized by X-ray diffraction and nitrogen adsorption-desorption analyses. The micelle aggregation number N was found to change only little, and the micropolarity remained constant when going from the tergitol solution to the full reaction mixture. The results of DLS measurements agree with this finding. Besides, while the condensation of silica took place after addition of NaF, the N value increased only very little with time up to the point where a small amount of mesostructured material precipitated out. These results indicate that the interaction between tergitol micelles and the siliceous species formed in the system by the hydrolysis of TEOS and also between micelles and the growing siliceous species must be very weak. As in our previous studies of the mechanism of formation of MCM41-type material from sodium silicate in the presence of cetyltrimethylammonium bromide, it appears that the locus of formation of the mesostructured material is not the micelle surface but the bulk phase. Micelles only act as reservoirs of surfactant providing surfactant monomer that binds to the growing siliceous species.     

A fluorescent PEBBLE nanosensor for intracellular free zinc

The development and characterisation of a fluorescent optical PEBBLE (Probe Encapsulated By Biologically Localised Embedding) nanosensor for the detection of zinc is detailed. A ratiometric sensor has been fabricated that incorporates two fluorescent dyes; one is sensitive to zinc and the other acts as a reference. The sensing components are entrapped within a polymer matrix by a microemulsion polymerisation process that produces spherical sensors that are in the size region of 20 to 200 nm. Cellular measurements are made possible by the small sensor size and the biocompatibility of the matrix. The effects of reversibility, photobleaching and leaching have been examined, as well as the selectivity towards zinc over other cellular ions such as Na+, Ca2+, K+, and Mg2+. The dynamic range of these sensors was found to be 4 to 50 microM Zn2+ with a linear range from 15 to 40 microM. The response time for the PEBBLE is less than 4 s and the sensor is reversible. In addition, the nanosensors are photostable and leaching from the matrix, determined using a novel method, is minimal. These sensors are capable of real-time inter- and intra-cellular imaging and are insensitive to interference from proteins.     

Nanostructured ZrO2-Coated TiO2 Electrodes for Dye-Sensitised Solar Cells

Thin films of ZrO₂ were deposited on nanostructured anatase TiO₂ electrodes via sol-gel route and utilised in the assembly of a dye-sensitised solar cells (DSSCs) forming nanostructured core-shell networks. The ZrO₂-coated TiO₂ electrodes were characterised by scanning electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy and constructing a DSSC. The characterisation concluded that core-shell morphologies were produced with varying ZrO₂ shell thickness without altering the anatase TiO₂ core. When a DSSC was constructed from the ZrO₂:TiO₂ core-shell electrode, the efficiency increased to 2.27% from 0.42% for the uncoated TiO₂ electrode. As the ZrO₂ shell thickness increased, the cell efficiency was reduced.     

Alexa Fluor 488 as an iron sensing molecule and its application in PEBBLE nanosensors

Molecular Probes' Alexa Fluor dyes are generally used for biological labeling because of their ideal fluorescent properties, but here we detail Alexa Fluor 488's nanomolar sensitivity to free iron. Furthermore, the dye has been encapsulated into a polymer nanosphere by a microemulsion method, producing <100 nm particles. These nanosensors, PEBBLEs (Probe Encapsulated By Biologically Localized Embedding) have micromolar sensitivity and are non-responsive to other metal ions of biological interest.     

Etude par spectrométrie de masse du diaza-2,5 dioxa-1,6 thia-6a λ IV pentalègne et de ses analogues séléniés et tellurés

The mass spectra of 2,5-diaza-1,6-dioxa-6a-λ-IV-pentalenes and of its selenium and tellurium analogs are recorded. The spectra show strong stability of these compounds under electronic impact and a rather good reproductibility for their fragmentations independently of thenature of the heteroatom (s, Se or Te).     

Fluorescent nano-PEBBLE sensors designed for intracellular glucose imaging

Polyacrylamide-based, ratiometric, spherical, optical nanosensors, or polyacrylamide PEBBLEs (Probes Encapsulated By Biologically Localized Embedding), have been fabricated, aimed at real-time glucose imaging in intact biological systems, i.e. living cells. These nanosensors are prepared using a microemulsion polymerization process, and their average size is about 45 nm in diameter. The sensors incorporate glucose oxidase (GOx), an oxygen sensitive fluorescent indicator (Ru[dpp(SO3Na)2]3)Cl2, and an oxygen insensitive fluorescent dye, Oregon Green 488-dextran or Texas Red-dextran, as a reference for the purpose of ratiometric intensity measurements. The enzymatic oxidation of glucose to gluconic acid results in the local depletion of oxygen, which is measured by the oxygen sensitive ruthenium dye. The small size and inert matrix of these sensors allows them to be inserted into living cells with minimal physical and chemical perturbations to their biological functions. The PEBBLE matrix protects the enzyme and fluorescent dyes from interference by proteins in cells, enabling reliable in vivo chemical analysis. Conversely, the matrix also significantly reduces the toxicity of the indicator and reference dyes to the cells, so that a larger variety of dyes can be used in optimal fashion. Furthermore, the PEBBLE matrix enables the synergistic approach in which there is a steady state of local oxygen consumption, and this cannot be achieved by separately introducing free enzyme and dyes into a cell. The work presented here describes the production and characterization of glucose sensitive PEBBLEs, and their potential for intracellular glucose measurements. The sensor response is determined in terms of the linear range, ratiometric operation, response time, sensor stability, reversibility and immunity to interferences.     

Substituent effects on the aromatic edge-to-face interaction

Substituent effects on the folding equilibrium of molecular torsion balances are rationalised on the basis of changes in the electrostatic interactions, the exchange repulsion, and the dispersive contributions to the interaction free enthalpy.