Sorbic acid as friendly curing agent for enhanced properties of ethylene propylene diene monomer rubber using gamma radiation

Sorbic acid (SA) is available in the market for low-cost and eco-friendly. It is known for using as a preservative. SA was used as a modifier together with gamma radiation to improve the properties of ethylene propylene diene monomer rubber (EPDM). The effect of SA concentration and gamma irradiation dose on the mechanical and physico-chemical properties of EPDM was investigated. The results indicated that the properties of EPDM rubber blended with SA were improved compared to untreated EPDM sample. The highest improvement was achieved by using SA concentrations of 10 phr (part per hundred part of rubber) a dose of 100 kGy of gamma irradiation. These findings were demonstrated by scanning electron microscopy (SEM), x-ray diffraction (XRD), Fourier Transform Infrared spectroscopy (FT-IR) and thermogravimetric analysis (TGA).     

A Novel Fluorimetric Bulk Optode Membrane Based on NOS Tridentate Schiff Base for Selective Optical Sensing of Al<Superscript>3+</Superscript> Ions

A novel fluorimetric optode has been developed for the highly selective and sensitive for the determination of ultra trace amounts of Al³⁺ ions. The proposed fluorescent optode is based on the incorporation of a simple and effective fluorescent sensor tridentate NOS Schiff base N-(2-hydroxynaphthylidene)-2-aminothiophenol (H₂L) in a plasticized PVC containing KTpClPB as a lipophilic anionic additive. H₂L was synthesized by a facile one-step Schiff base reaction. The plasticized PVC-membrane displays a calibration response for Al³⁺ ions over a wide concentration range from 1.0 × 10^?9 to 4.4 × 10^?3 mol/L. The fluorescence signal of the optode membrane can be easily recovered by immersion in 0.01 M EDTA. In addition to high stability and reproducibility, the sensor shows a unique selectivity towards Al³⁺ ion with respect to common co-existing cations, particularly Ga³⁺and In³⁺. The proposed optode was applied successfully for determination of Al³⁺ in some real samples, including bottled drinking waters, bottled mineral waters and soft drinks.     

Solid-phase organic tagging resins for labeling biomolecules by 1,3-dipolar cycloaddition: application to the synthesis of a fluorescent non-peptidic vasopressin receptor ligand

Two novel solid-phase organic tagging (SPOrT) resins were synthesized to facilitate the labeling of peptides and small organic compounds with a fluorescent probe. Both resins were obtained from the commercially available backbone amide linker (BAL) resin. Following the solid-phase synthesis of model compounds, a tripeptide and benzazepine, the fluorescent probe derived from Lissamine Rhodamine B was incorporated through CuI-catalyzed 1,3-dipolar cycloaddition. Final cleavage in acidic media enabled access to both types of molecules in good yield with high purity. The SPOrT resin was successfully applied to the preparation of the first non-peptidic fluorescent compound with a nanomolar affinity for the human vasopressin V2 receptor (V2R) subtype. This molecule will find application in binding assays that use polarization or fluorescence resonance energy-transfer (FRET) techniques. The SPOrT resins are also well suited for other tags and the parallel synthesis of a fluorescently tagged library for protein screening.     

Identification of carbohydrates by matrix-free material-enhanced laser desorption/ionisation mass spectrometry

Matrix-assisted laser desorption/ionisation time-of-flight mass spectrometry (MALDI-TOF-MS) is a sensitive mass spectrometric technique which utilises acidic materials as matrices for laser energy absorption, desorption and ionisation of analytes. These matrix materials produce background signals particularly in the low-mass range and make the detection and identification of small molecules difficult and nearly impossible. To overcome this problem this paper introduces matrix-free material-enhanced laser desorption/ionisation mass spectrometry (mf-MELDI-MS) for the screening and analysis of small molecules such as carbohydrates. For this purpose, 4,4'-azo-dianiline was immobilised on silica gel enabling the absorption of laser energy sufficient for successful desorption and ionisation of low molecular weight compounds. The particle and pore sizes, the solvent system for suspension and the sample preparation procedures have been optimised. The newly synthesised MELDI material delivered excellent spectra with regard to signal-to-noise ratio and detection sensitivity. Finally, wheat straw degradation products and Salix alba L. plant extracts were analysed proving the high performance and excellent behaviour of the introduced material.     

Recent advances in capillary electrophoresis for biomarker discovery

The use of non-invasive methods for detecting biomarkers opens a new era in patient care, since clinical investigators have long been searching for accurate and reproducible measurements of putative biomarkers. There are many factors which make this research challenging, beginning with lack of standardization of sample collection and continuing through the entire analytical procedure. Among the variety of methods so far used for biomarker screening, capillary electrophoresis represents a robust, reliable, and widely used analytical tool. This review will focus on recent applications of CE to the analysis of body fluids and tissues for identification of biomarkers.     

Laser desorption/ionization mass spectrometric analysis of small molecules using fullerene‐derivatized silica as energy‐absorbing material

In spite of the growing acceptance of matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry for the analysis of a wide variety of compounds, including polymers and proteins, its use in analyzing low‐molecular‐weight molecules (<1000m/z) is still limited. This is mainly due to the interference of matrix molecules in the low‐mass range. Here the derivatized fullerenes covalently bound to silica particles with different pore sizes are applied as thin layer for laser desorption/ionization (LDI) mass spectrometric analysis. Thus, an interference of intrinsic matrix ions can be eliminated or minimized in comparison with the state‐of‐the‐art weak organic acid matrices. The desorption/ionization ability of the developed fullerene–silica materials depends on the applied laser power, sample preparation and pore size of the silica particles. Thus, fullerene–silica serves as an LDI support for mass spectrometric analysis of molecules (<1500 Da). The performance of the fullerene–silica is demonstrated by the mass analysis of variety of small molecules such as carbohydrates, amino acids, peptides, phospholipids and drugs. Copyright © 2010 John Wiley & Sons, Ltd.     

Progress in capillary electrophoresis of biomarkers and metabolites between 2002 and 2005

Biomarker discovery and metabolite research is a fast-growing and extremely important domain not only for the early detection of certain diseases but also for controlling its progress as well as in pharmaceutical investigations. For the analytical separation and identification, CE plays an indisputable role. Capillary systems enhancing different selectivity are applied and connected to different kind of detection systems. As the choice of buffer and its composition is responsible for a successful separation, special emphasis is put on solvent effects in this review. Altogether the most important capillary electrophoretic techniques applied for biomarker and metabolites analysis published between 2002 and 2005 are summarized and discussed.     

Validated stability-indicating spectrofluorimetric method with enhanced sensitivity for determination of repaglinide in tablets

A simple and highly sensitive spectrofluorimetric method was developed and validated for determination of the antidiabetic agent repaglinide (RG) in tablets. The proposed method is based on measurement of the native fluorescence of RG in 0.1 M H(2)SO(4)/methanol medium at 360 nm after excitation at 243 nm. The method showed a linear dependence of the relative fluorescence intensity on drug concentration over the range of 0.02-0.50 μg mL(-1) with lower detection limit of 6.0 ng mL(-1) and lower quantification limit of 18 ng mL(-1). The method was successfully applied for determination of RG in different tablets and the obtained results were in good agreement with those obtained by the official method. The proposed method was extended to investigate the kinetics of oxidative degradation of the drug. A proposal for the degradation pathway was postulated.     

Effects of variable properties on MHD heat and mass transfer flow near a stagnation point towards a stretching sheet in a porous medium with thermal radiation

The effect of variable viscosity and thermal conductivity on steady magnetohydrodynamic(MHD) heat and mass transfer flow of viscous and incompressible fluid near a stagnation point towards a permeable stretching sheet embedded in a porous medium are presented,taking into account thermal radiation and internal heat genberation/absorbtion.The stretching velocity and the ambient fluid velocity are assumed to vary linearly with the distance from the stagnation point.The Rosseland approximation is used to describe the radiative heat flux in the energy equation.The governing fundamental equations are first transformed into a system of ordinary differential equations using a scaling group of transformations and are solved numerically by using the fourth-order Rung-Kutta method with the shooting technique.A comparison with previously published work has been carried out and the results are found to be in good agreement.The results are analyzed for the effect of different physical parameters,such as the variable viscosity and thermal conductivity,the ratio of free stream velocity to stretching velocity,the magnetic field,the porosity,the radiation and suction/injection on the flow,and the heat and mass transfer characteristics.The results indicate that the inclusion of variable viscosity and thermal conductivity into the fluids of light and medium molecular weight is able to change the boundary-layer behavior for all values of the velocity ratio parameter λ except for λ = 1.In addition,the imposition of fluid suction increases both the rate of heat and mass transfer,whereas fluid injection shows the opposite effect.     

Evaluation of extraction methods for the simultaneous analysis of simple and macrocyclic trichothecenes

The article is concerned with the simultaneous determination of simple and macrocyclic trichothecenes using high-performance liquid chromatography (LC) coupled to UV and mass spectrometric (MS) detection. Emphasis is put on the liquid-liquid extraction (LLE) and solid phase extraction (SPE) procedure from plant material such as wheat, comparing SPE cartridges packed with different stationary phases based on silica and polymer sorbents. In this coherence a polymeric material on the basis of poly(glycidyl methacrylate-divinylbenzene) (GMA-DVB) is developed with special regard on synthesis procedures to enhance the extraction recovery of trichothecenes in a broad polarity range. Evaluation of extraction techniques showed that the introduced material is competitive with commercially available high quality SPE materials. Percentage recovery is 82% for polar compounds, 89% for medium polar compounds and 98% for lipophilic compounds.