Synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines

Methods for the synthesis of (pyridinyl)-1,2,4-triazolo[4,3-a]pyridines were developed. The principal route to the required intermediate 2-chloropyridines was based on rearrangements of mono N-oxides of 2,2′-bipyridine, 2,3′-bipyridine, 3,3′-bipyridine, 2,4′-bipyridine and 4,4′-bipyridine with phosphorus oxychloride. Reaction of 3,3′-bipyridine 1-oxide or 2,2′-bipyridine 1-oxide with phosphorus oxychloride gave mixtures of chloro isomers. Reaction with acetic anhydride, 3,3′-bipyridine 1-oxide and 2,2′-bipyridine 1-oxide gave exclusively [3,3′-bipyridine]-2(1H)-one and [2,2′-bipyridine]-6(1H)-one, respectively. 1,2,4-Triazolo[4,3-a]pyridines with pyridinyl groups at the 5,6,7 and 8 positions were synthesized.     

Investigation of bovine ubiquitin conformers separated by high-field asymmetric waveform ion mobility spectrometry: Cross section measurements using energy-loss experiments with a triple quadrupole mass spectrometer

High-field asymmetric waveform ion mobility spectrometry (FAIMS) was used to separate gas-phase conformers of bovine ubiquitin produced by electrospray ionization. These conformers were sampled by a triple quadrupole mass spectrometer where energy-loss experiments, following the work of Douglas and co-workers, were used to determine their cross sections. The measured cross sections for some conformers were readily altered by the voltages applied to the interface ion optics, therefore very gentle mass spectrometer interface conditions were required to preserve gas-phase conformers separated by FAIMS. Cross sections for 19 conformers (charge states +5 through +13) were measured. Two conformers for the +12 charge state, which were readily separated in FAIMS, were found to have similar cross sections. Based on a method to calibrate the collision gas thickness, the cross sections measured using the FAIMS/energy-loss method were compared with literature values determined using drift tube ion mobility spectrometry. The comparison illustrated that the conformers of bovine ubiquitin that were identified using drift tube ion mobility spectrometry were also observed using the FAIMS device.     

Preparation of poly(methyl methacrylate) and copolymers having enhanced thermal stabilities using sucrose-based comonomers and additives

A series of methyl methacrylate polymers have been prepared containing sucrose-based crosslinkers and additives. Thermogravimetry and long-term aging studies at 200°C show that sucrose-based alkyl and allyl ethers provide unprecedented thermal stability to linear, as well as crosslinked, poly (methyl methacrylate) or PMMA. Linear PMMA and PMMA crosslinked with trimethylolpropane trimethacrylate (TMPTMA) both degrade at 284°C. PMMA containing octa-O-crotylsucrose (1 mol %) degraded at 322°C. Depending on concentration, PMMA containing octa-O-allylsucrose (0.1-1.0 mol % and higher) degraded between 334 and 354°C, and PMMA containing 1′,6,6′-trimethacryloyl-2,3,3′,4,4′-penta-O-methylsucrose (0.1-1.0 mol %) degraded between 309 and 320°C. PMMA containing (1 mol % each) sucrose-based esters, ester-ether derivatives, all degraded at or below the degradation temperature of pure PMMA. Long-term air aging studies revealed that PMMA containing penta-O-methylsucrose trimethacrylate, octa-O-allylsucrose, and octa-O-crotylsucrose did not flow or sag after heating for 24 h at 200°C, but the polymers did show yellowing. While linear and crosslinked samples of PMMA containing compounds other than sucrose ethers lost more than 50% of their original weight within 15 h at 200°C, PMMA containing sucrose-based ethers lost about 8 and 20% of their original weight after 1 and 8.5 days, respectively. Herein we propose a unique mechanism by which saccharide ethers may be imparting this unprecedented thermal stabilization to PMMA. While tertiary hydrogens alpha to oxygens in saccharide ethers are stable to chain transfer during normal polymerization temperatures, they readily chain transfer at 200°C where PMMA is unstable. Chain transfer of these hydrogens is followed by fragmentation to produce alkyl, allyl or crotyl radicals, which combine with the macroradicals and terminate depropagation. © 1995 John Wiley & Sons, Inc.     

The kinetics of styrene emulsion polymerization

A study has been carried out on the kinetics of persulfate-initiated emulsion polymerization of styrene in the presence of an anionic (oleate) or mixed anionic-nonionic emulsifier. In both cases it appears that Smith-Ewart kinetics are obeyed, i.e., there is a constant-rate period up to 40–50% conversion, during which there is a concomitant constant molecular weight development. The sharp increases in molecular weight with conversion reported by Grancio and Williams appear to be an artifact resulting from the use of an impure emulsifier (Triton X-100), which acts as a chain transfer agent to reduce the molecular weight by approximately an order of magnitude. Hence there does not appear to be any kinetic justification for assuming an inhomogeneous swollen latex particle (“core-shell” morphology), and normal thermodynamic considerations should still apply to this swelling phenomemon.     

Intramolecular fluorine migration via four-member cyclic transition states

Gaseous CF(3)(+) interchanges F(+) for O with simple carbonyl compounds. CF(3)(+) reacts with propionaldehyde in the gas phase to produce (CH(3))(2)CF(+) via two competing pathways. Starting with 1-(13)C-propionaldehyde, the major pathway (80%) produces (CH(3))(2)CF(+) with the carbon label in one of the methyl groups. The minor pathway (20%) produces (CH(3))(2)CF(+) with the carbon label in the central position. The relative proportions of these two pathways are measured by (19)F NMR analysis of the neutral CH(3)CF=CH(2) produced by deprotonation of (CH(3))(2)CF(+) at <10(-)(3) Torr in an electron bombardment flow (EBFlow) reactor. Formation of alkene in which carbon is directly bonded to fluorine means that (in the minor product, at least) an F(+) for O transposition occurs via adduct formation followed by 1,3-atom transfer and then isomerization of CH(3)CH(2)CHF(+) to the more stable (CH(3))(2)CF(+). Use of CF(4) as a chemical ionization (CI) reagent gas leads to CF(3)(+) adduct ions for a variety of ketones, in addition to isoelectronic transposition of F(+) for O. Metastable ion decompositions of the adduct ions yield the metathesis products. Decompositions of fluorocycloalkyl cations formed in this manner give evidence for the same kinds of rearrangements as take place in CH(3)CH(2)CHF(+). Density functional calculations confirm that F(+) for O metathesis takes place via addition of CF(3)(+) to the carbonyl oxygen followed by transposition via a four-member cyclic transition state. A computational survey of the effects of different substituents in a series of aldehydes and acyclic ketones reveals no systematic variation of the energy of the transition state as a function of thermochemistry, but the Hammond postulate does appear to be obeyed in terms of progress along the reaction coordinate. Bond lengths corresponding to the central barrier correlate with overall thermochemistry of the F(+) for O interchange, but in a sense opposite to what might have been expected: the transition state becomes more product-like as the metathesis becomes increasingly exothermic. This reversal of the naive interpretation of the Hammond postulate is accounted for by the relative positions of the potential energy wells that precede and follow the central barrier.     

Photophysics of ruthenium(II) complexes with 2-(2′-pyridyl) pyrimidine and 2,2′-bipyridine ligands in fluid solution

The photophysics of three complexes of the form Ru(bpy)₃₋(pypm)²⁺ (where bpy2,2′-bipyridine, pypm 2-(2′-pyridyl)pyrimidine and P=1, 2 or 3) was examined in H₂O, propylene carbonate, CH₃CN and 4:1 (v/v) C₂H₅OH---CH₃OH; comparison was made with the well-known photophysical behavior of Ru(bpy)₃²⁺. The lifetimes of the luminescent metal-to-ligand charge transfer (MLCT) excited states were determined as a function of temperature (between −103 and 90 °C, depending on the solvent), from which were extracted the rate constants for radiative and non-radiative decay and ΔE, the energy gap between the MLCT and metal-centered (MC) excited states. The results indicate that ^*Ru(bpy)₂(pypm)²⁺ decays via a higher lying MLCT state, whereas ^*Ru(pypm)₃²⁺ and ^*Ru(pypm)₂(bpy)²⁺ decay predominantly via the MC state.     

Determination of phosphorus:glycerol:acyl ratios in phospholipids

Phospholipids (1–5 mg) are mixed with methyl heptadecanoate as an internal standard. One part of the sample is reduced with Vitride in tetrahydrofuran in a sealed tube at 50 2C for 1 hr. The reaction products are acetylated in the same tube by treatment with acetic acid-acetic anhydride at 140 °C. After 1 hr total O-acyl and after 16 additional hours glycerol are determined as the fully acetylated compounds by gas-liquid chromatography.Another part of the sample is subjected to acidic hydrolysis and total O-acyl and N-acyl groups are determined by GLC as fatty-acid methyl esters. The aqueous phase is heated to 100 °C with 6 N HCl for 72 hr and phosphorus is measured colorimetrically.     

Organic-inorganic hybrid materials: hydrothermal syntheses and structural characterization of bimetallic organophosphonate oxides of the type Mo/Cu/O/RPO(3)(2-)/organoimine

The hydrothermal reactions of a Cu(II) starting material, a molybdate source, 2,2'-bipyridine or terpyridine, and the appropriate alkyldiphosphonate ligand yield two series of bimetallic organophosphonate hybrid materials of the general types [Cu(n)(bpy)(m)Mo(x)O(y)(H(2)O)(p)[O(3)P(CH(2))(n)PO(3)](z)] and [Cu(n)(terpy)(m)Mo(x)O(y)(H(2)O)(p)[O(3)P(CH(2))(n)PO(3)](z)]. The bipyridyl series includes the one-dimensional materials [Cu(bpy)(MoO(2))(H(2)O)(O(3)PCH(2)PO(3))] (1) and [[Cu(bpy)(2)][Cu(bpy)(H(2)O)](Mo(5)O(15))(O(3)PCH(2)CH(2)CH(2)CH(2)PO(3))].H(2)O (5.H(2)O) and the two-dimensional hybrids [Cu(bpy)(Mo(2)O(5))(H(2)O)(O(3)PCH(2)PO(3))].H(2)O (2.H(2)O), [[Cu(bpy)](2)(Mo(4)O(12))(H(2)O)(2)(O(3)PCH(2)CH(2)PO(3))].2H(2)O (3.2H(2)O), and [Cu(bpy)(Mo(2)O(5))(O(3)PCH(2)CH(2)CH(2)PO(3))](4). The terpyridyl series is represented by the one-dimensional [[Cu(terpy)(H(2)O)](2)(Mo(5)O(15))(O(3)PCH(2)CH(2)PO(3))].3H(2)O (7.3H(2)O) and the two-dimensional composite materials [Cu(terpy)(Mo(2)O(5))(O(3)PCH(2)PO(3))] (6) and [[Cu(terpy)](2)(Mo(5)O(15))(O(3)PCH(2)CH(2)CH(2)PO(3))] (8). The structures exhibit a variety of molybdate building blocks including isolated [MoO(6)] octahedra in 1, binuclear subunits in 2, 4, and 6, tetranuclear embedded clusters in 3, and the prototypical [Mo(5)O(15)(O(3)PR)(2)](4-) cluster type in 5, 7, and 8. These latter materials exemplify the building block approach to the preparation of extended structures.     

1,4-Difluoro-2,5-dimethoxybenzene as a precursor for iterative double benzyne-furan Diels-Alder reactions

[reaction: see text] The use of 1,4-difluoro-2,5-dimethoxybenzene as a novel precursor for iterative two-directional benzyne-furan Diels-Alder reactions, using a range of 2- and 3-substituted furans, is reported. Substituted oxabenzonorbornadienes were synthesized following the initial Diels-Alder reaction, which upon ring opening under acidic conditions gave substituted naphthol derivatives. Highly substituted anthracenols were generated in the second benzyne-furan Diels-Alder reaction following acid-catalyzed isomerization of the cycloadducts.