硅基交联聚酸正丁酯反相HPLC固定相的研究

采用硅胶表面直接交联聚合法，制备了硅基交联聚丙烯酸正丁酯反相高效液相色谱固定相。用红外、扫描电镜和元素分析等方法对固定对进行了表征。考察了固定相对含氧芳烃衍生物的分离。     

混合配体、希土三元配合物的研究 Ⅳ.3,5二硝基水扬酸(H2DNSA)、邻菲咯啉(phen)、希土(RE)三元固体配合物的合成及性质

本文报道了十种希土元素与3,5-二硝基水扬酸、邻菲咯啉三元配合物的制备方法。通过元素和化学分析测定了化合物的化学组成,并用红外光谱、紫外光谱、差热分析、磁化率、X射线粉天衍射等对所合成的化合物进行了结构和性质的研究。     

New ceramides from the flower of Albizia iulibrissin

A new ceramide and its glycoside were isolated from the flower of Albizia julibrissin. Their structures were established as (25,35,4R,8E)-2-[(2'R)-hydroxyhexadecanoylamino]-8-tetra-cosene-l,3,4-triol(I)and 1-O-β-D-glucopyranosy1-(2S,3S,4R,8E)-2-[(2'R)-hydroxy-hexade-canoylamino]-8-tetracosene-1,3,4-triol (II) on the basis of chemical and spectroscopic studies.     

反相液相色谱用球形共聚物柱填料

采用新颖聚合工艺制备用于反相高效液相色谱柱填料的乙基苯乙烯-二乙烯苯球形共聚物,不需使用备有高速搅拌的混匀器和特殊的筛析设备,聚合物粒径的95％在3～7μm之间,测算了渗透性、柱效和峰不对称性等柱参数,并通过分离实例说明该填料对胺类、酚类和芳烃类具有优良分离性能。     

A Novel Asymmetric Synthesis of （-）-cis-1, 3-Dibenzylhexahydrofuro[3, 4-d]imidazole-2,4-dione

(-)-cis-1, 3-Dibenzyl-hexahydrofuro[3, 4-d]imidazole-2, 4-dione was prepared by a new synthesis method from meso dicarboxylic acid and dehydroabietylamine by asymmetric reduction in good yield with up to 91.6% e.e. value.     

Surface-enhanced Raman scattering of pyridine using different metals: differences and explanation based on the selective formation of alpha-pyridyl on metal surfaces

A simple method has been developed to produce SERS-active metal surfaces. Six metal surfaces (cadmium, nickel, gold, iron, copper, and silver) have been prepared on an aluminum foil underlayment by chemical reduction and strong surface-enhanced Raman signals have been observed for pyridine species on these surfaces. This permits the direct comparison of pyridine spectra on different metal surfaces prepared by the same chemically clean method. The differences among the SER spectra of the aqueous pyridine species using different metals generally follow the trend of silver, cadmium, nickel, iron, gold, and copper, which can be explained by the selective formation of alpha-pyridyl species and the equilibria between end-on adsorbed pyridines and edge-on adsorbed alpha-pyridyl species on the different metal surfaces.     

The mechanism of proton transfer between adjacent sites exposed to water

The surface of a protein, or a membrane, is spotted with a multitude of proton-binding sites, some of which are only a few angstroms apart. When a proton is released from one site, it propagates through the water by a random walk under the bias of the local electrostatic potential determined by the distribution of the charges on the protein. Some of the released protons disperse into the bulk, but during the first few nanoseconds, the released protons can be trapped by encounter with nearby acceptor sites. This process resembles a scenario which corresponds with the time-dependent Debye-Smoluchowski equation. In the present study, we investigated the mechanism of proton transfer between sites that are only a few angstroms apart, using as a model the proton exchange between sites on a small molecule, fluorescein, having two, spectrally distinguishable, proton-binding sites. The first site is the oxyanion on the chromophore ring structure. The second site is the carboxylate moiety on the benzene ring of the molecule. Through our experiments, we were able to reconstruct the state of protonation at each site and the velocity of proton transfer between them. The fluorescein was protonated by a few nanosecond long proton pulse under specific conditions that ensured that the dye molecules would be protonated only by a single proton. The dynamics of the protonation of the chromophore were measured under varying initial conditions (temperature, ionic strength, and different solvents (H(2)O or D(2)O)), and the velocity of the proton transfer between the two sites was extracted from the overall global analysis of the signals. The dynamics of the proton transfer between the two proton-binding sites of the fluorescein indicated that the efficiency of the site-to-site proton transfer is very sensitive to the presence of the screening electrolyte and has a very high kinetic isotope effect (KIE = 55). These two parameters clearly distinguish the mechanism from proton diffusion in bulk water. The activation energy of the reaction (E(a) = 11 kcal mol(-1)) is also significantly higher than the activation energy for proton dissociation in bulk water (E(a) approximately 2.5 kcal mol(-1)). These observations are discussed with respect to the effect of the solute on the water molecules located within the solvation layer.     

Synthesis and applications of poly(acryl<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonamideamidine-<Emphasis Type="Italic">p</Emphasis>-aminobenzenesulfonylamide) chelating fiber for pre-concentrating and separating trace Bi(III), Hg(III), Au(III) and Pd(IV) from solution samples

Poly(acrylp-aminobenzenesulfonamideamidine-p-aminobenzenesulfonylamide) chelating fiber containing "S", "N", and "O" elements was synthesized from polyacrylonitrile fiber and p-aminobenzene sulfonamide and used to enrich and separate trace Bi(III), Hg(III), Au(III), and Pd(IV) ions from wastewater and ore sample solution. The enrichment acidity, flow rate, elution conditions, reuse, interference ions, saturated adsorption capacity, constant of adsorption rate, analytical accuracy, and actual samples on chelating fiber were investigated by means of inductively coupled plasma optical emission spectrometry (ICP-OES) with satisfactory results. Solutions of 100 ng mL^–1 of Bi(III), Hg(III), Au(III), and Pd(IV) ions can be enriched quantitatively by this chelating fiber at a rate of 1.0 mL min^–1 at pH 4 and desorbed quantitatively with 20 mL of 0.25 M HCl and 2% CS(NH₂)₂ solution at 50 °C (with recovery 97%). When the chelating fiber was reused for 20 times, the recoveries of the analyzed ions enriched by the fiber were still over 95% (except for Hg(III)). One thousand-fold excesses of Mn²⁺, Ca²⁺, Zn²⁺, Mg²⁺, Fe³⁺, Cu²⁺, Ni²⁺, Al³⁺, and Ba²⁺ ions and thousands-fold excesses of Na⁺ and K⁺ cause little interference in the pre-concentration and determination of the analyzed ions. The saturated adsorption capacity of Bi(III), Hg(III), Au(III), and Pd(IV) was 4.850×10^–4, 3.235×10^–4, 2.807×10^–4, and 3.386×10^–4 mol g^–1, respectively. The constants of adsorption rate were 0.409 min^–1 for Bi, 0.122 min^–1 for Hg, 0.039 min^–1 for Au, and 0.080 min^–1 for Pd. The relative standard deviations (RSDs) for the enrichment and determination of 10 ng mL^–1 Bi(III), Hg(III), Au(III), and Pd(IV) were lower than 2.3%. The results obtained for these ions in actual samples by this method were basically in agreement with the given values with average errors of less than 1.0%. FT-IR spectra shows that the existence of –SO₂–Ar, –H₂N–Ar, O=C–NH–, HN=C–NH–, and –HN–SO₂ functional groups are verified in the chelating fiber. From the FT-IR spectroscopy, we can see that Hg(III), Au(III), and Pd(IV) are mainly combined with nitrogen and sulfur (or oxygen), and Bi(III) is mainly combined with nitrogen (or oxygen) of the groups to form a chelating complex.     

Catalytic asymmetric cyanosilylation of ketones with chiral Lewis base

The development of broadly applicable and practical catalytic approaches for the enantioselective creation of quaternary stereocenters remains a highly desirable yet challenging goal. In this Communication, we describe a highly enantioselective cyanosilylation of acetal ketones (alpha,alpha-dialkoxy ketones) catalyzed by modified cinchona alkaloids. This reaction is the first highly enantioselective cyanosilylation of ketones catalyzed by an organic chiral Lewis base and is found to be highly efficient with acetal ketones bearing a broad range of alkyl, aryl, alkenyl, and alkynyl substituents. This new catalytic asymmetric reaction, coupled with the versatility of the acetal functionality, provides a broadly useful synthetic method for chiral building blocks bearing quaternary stereocenters. Acetal ketones, readily accessible but previously unexplored in asymmetric synthesis, demonstrate unusual reactivity and selectivity toward the nucleophilic cyanosilylation, thereby suggesting that they may be interesting substrates for other catalytic enantioselective reactions.     

Hydrothermal synthesis, characterization and thermochemistry of Ca2[B2O4(OH)2]·0.5H2O

A pure calcium borate Ca₂[B₂O₄(OH)₂]·0.5H₂O has been synthesized under hydrothermal condition and characterized by XRD, FT-IR and TG as well as by chemical analysis. The molar enthalpy of solution of Ca₂[B₂O₄(OH)₂]·0.5H₂O in HC1·54.582H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HC1·54.561H₂O and of CaO in (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpy of formation of −(3172.5 ± 2.5) kJ mol⁻¹ of Ca₂[B₂O₄(OH)₂]·0.5H₂O was obtained.