Simultaneous determination of trace cadmium and mercury in Chinese herbal medicine by non-dispersive atomic fluorescence spectrometry using intermittent flow vapor generator.

A method was proposed for the simultaneous determination of trace cadmium and mercury by vapor generation non-dispersive atomic fluorescence spectrometry using an intermittent flow system. The effects of the parameters on the performance were studied systematically. The parameters such as acid concentration of the reaction medium, flow rate of the carrier gas and shield gas, the observation height and the atomizer temperature, etc. which affected the sensitivity, were optimized. Ascorbic acid, cobalt ion and thiourea were used as enhancement reagents or masking agents to enhance the generation efficiency of the volatile species of Cd and Hg. The mechanisms of their effects on vapor generation were investigated. In the presence of thiourea and ascorbic acid, the influences of some coexisting elements on the determination of cadmium and mercury were investigated. The detection limits (3sigma) were 0.010 microg l(-1) for Cd and 0.019 microg l(-1) for Hg, respectively. The relative standard deviations for Cd and Hg at 1.00 microg l(-1) were 2.6% and 0.97% (n = 11), respectively. The proposed method has been satisfactorily applied to the determination of trace cadmium and mercury in Chinese herbal medicine.     

Boiling heat transfer characteristics of nanofluids in a flat heat pipe evaporator with micro-grooved heating surface

An experimental study was performed to understand the nucleate boiling heat transfer of water–CuO nanoparticles suspension (nanofluids) at different operating pressures and different nanoparticle mass concentrations. The experimental apparatus is a miniature flat heat pipe (MFHP) with micro-grooved heat transfer surface of its evaporator. The experimental results indicate that the operating pressure has great influence on the nucleate boiling characteristics in the MFHP evaporator. The heat transfer coefficient and the critical heat flux (CHF) of nanofluids increase greatly with decreasing pressure as compared with those of water. The heat transfer coefficient and the CHF of nanofluids can increase about 25% and 50%, respectively, at atmospheric pressure whereas about 100% and 150%, respectively, at the pressure of 7.4 kPa. Nanoparticle mass concentration also has significant influence on the boiling heat transfer and the CHF of nanofluids. The heat transfer coefficient and the CHF increase slowly with the increase of the nanoparticle mass concentration at low concentration conditions. However, when the nanoparticle mass concentration is over 1.0 wt%, the CHF enhancement is close to a constant number and the heat transfer coefficient deteriorates. There exists an optimum mass concentration for nanofluids which corresponds to the maximum heat transfer enhancement and this optimum mass concentration is 1.0 wt% at all test pressures. The experiment confirmed that the boiling heat transfer characteristics of the MFHP evaporator can evidently be strengthened by using water/CuO nanofluids.     

Effects of the laser surface treatment on the mechanical properties of CuZr-based bulk metallic glasses

Surfaces of three types of CuZr-based bulk metallic glasses (BMGs) were modified by laser surface treatment (LST), and the influence of the treatment on structure and mechanical properties of these alloys was investigated. The phase structure of as-cast and laser-treated samples was characterized by XRD and the morphology of the alloys after fracture was examined by SEM. The compressive plasticity of treated Cu47.5Zr47.5Al5 and Cu46.5Zr47.5Al5Co1 BMGs can be improved from 0.5% to 2.0% and from 1.2% to 5.7% respectively compared with the as-cast ones, while (Cu0.55Zr0.40Al0.05)99Er1 BMG shows insignificant change of plasticity. The improvement in plasticity is attributed to induced crystallization of B2 CuZr phase in the treated surface zone of selected metallic glasses.     

Coral reef-like polyanaline nanotubes prepared by a reactive template of manganese oxide for supercapacitor electrode

Coral reef-like PANI nanotubes composed of nanopaticles were successfully synthesized by a reactive template of manganese oxide.The structure was characterized by using SEM,TEM,and FT-IR,and the supercapacitive behaviors of these nanotubes were investigated with cyclic voltammetry（CV）,and charge-discharge tests,respectively.A maximum specific capacitance of 533 F/g could be achieved in 1mol/L aqueous H₂SO₄ with the potential range of -0.2 to 0.8 V（vs.the saturated calomel electrode） in a half-cell setup configuration for PANI electrode,suggesting its potential application in the electrode material for electrochemical capacitors.     

Delay of terminal current in systems with abruptly changed Hamiltonian

The current response for the parameter change of a mesoscopic system is a practical issue for future's circuit design. Nowadays most considered cases are various types of bias modulation, while the effect of change of conductor Hamiltonian is seldom addressed. In this paper, we investigate the response of ballistic transport induced by a sudden change of the conductor Hamiltonian. We formulize the terminal current in language of non-equilibrium Green's function. Our method is applied to one-dimensional tight-binding chains and we find that the terminal current has a delay to the Hamiltonian change. The amount of delay is not determined by the velocity of incident electrons in the bias window, but depends on the tight-binding hopping energy γ. The delay of current response at the detecting point away from where the Hamiltonian changes is $C{\gamma }^{?1}$, where C is a constant independent of the system.     

The Special Issue Dedicated to the Memory of Professor Wei-Shan Zhou(周维善)

This special issue is dedicated to the memory of thelate Professor Wei-Shan Zhou at Shanghai Institute of Organic Chemistry,Chinese Academy of Sciences.     

Synthesis of monodisperse oligocarbazoles-functionalized anthracenes with intense blue-emitting

New well-defined monodisperse oligocarbazoles-functionalized anthracenes An-OCZn (n = 1, 2, 3) have been synthesized through Suzuki cross-coupling reaction of the brominated oligocarbazoles and 9,10-bis(4,4,5,5-tetramethyl-1,3,2-dioxaborolan-2-yl)anthracene. They show good solubility in organic solvents, including dichloromethane, chloroform, toluene, ethyl acetate, and tetrahydrofuran. It should be noted that, in the case of An-OCZn, the formation of the excimer based on anthracene unit is suppressed completely due to the introduction of oligocarbazoles in 9,10-position of anthracene so that an intense blue-emitting has been afforded. In addition, the obtained An-OCZn exhibit good electrochemical and thermal stabilities. Thus, the oligocarbazoles-functionalized anthracenes can be a class of promising candidates for novel blue-emitting materials employed in OLEDs or related devices.     

3D amorphous carbon and graphene co-modified LiFePO4 composite derived from polyol process as electrode for high power lithium-ion batteries

Amorphous carbon and graphene co-modified LiFePO_4 nanocomposite has been synthesized via a facile polyol process in connection with a following thermal treatment.Various characterization techniques,including XRD.Mossbauer spectra,Raman spectra,SEM,TEM,BET,O_2-TPO,galvano charge-discharge,CV and EIS were applied to investigate the phase composition,carbon content,morphological structure and electrochemical performance of the synthesized samples.The effect of introducing way of carbon sources on the properties and performance of LiFePO_4/C/graphene composite was paid special attention.Under optimized synthetic conditions,highly crystalized olivine-type LiFePO_4was successfully obtained with electron conductive Fe_2P and FeP as the main impurity phases.SEM and TEM analyses demonstrated the graphene sheets were randomly distributed inside the sample to create an open structured LiFePO_4 with respect to graphene,while the glucosederived carbon mainly coated over LiFeP04 particles which effectively connected the graphene sheets and LiFePO_4 particles to result in a more efficient charge transfer process.As a result,favorable electrochemical performance was achieved.The performance of the amorphous carbon-graphene co-modified LiFePO_4 was further progressively improved upon cycling in the first 200 cycles to reach a reversible specificcapacity as high as 97 mAh·g~(-1) at 10 C rate.     

Influence of TiO2 impregnated with a novel copper(II) carboxylic porphyrin and its application in photocatalytic degradation of 4-Nitrophenol

A novel 5,15-di-[4-carboxylatomethoxy]phenyl-10,20-diphenylporphyrin, its copper complex and the corresponding metalloporphyrin-TiO₂ photocatalyst were synthesized and characterized by DRS, SEM, XRD, and FT–IR. The photocatalytic effects of anataseTiO₂ impregnated with this copper(II) porphyrin was investigated by photodegradation of 4-nitrophenol(4-NP) in aqueous solution under Xenon lamp irradiation. The results indicated that the photoactivity of copper(II) porphyrin-TiO₂ composite was evidently enhanced by the interaction between carboxyl of the porphyrin molecule and hydroxyls anchored on the TiO₂. Futhermore, the copper(II) carboxylic porphyrin displayed good adsorption behavior and activity of the dye-sensized TiO₂ system.