A Ti3C2TX/Pt–Pd based amperometric biosensor for sensitive cancer biomarker detection

The detection of cancer biomarkers is of great significance for the early screening of cancer. Detecting the content of sarcosine in blood or urine has been considered to provide a basis for the diagnosis of prostate cancer. However, it still lacks simple, high-precision and wide-ranging sarcosine detection methods. In this work, a Ti₃C₂T_X/Pt–Pd nanocomposite with high stability and excellent electrochemical performance has been synthesized by a facile one-step alcohol reduction and then used on a glassy carbon electrode (GCE) with sarcosine oxidase (SO_x) to form a sarcosine biosensor (GCE/Ti₃C₂T_X/Pt–Pd/SO_x). The prominent electrocatalytic activity and biocompatibility of Ti₃C₂T_X/Pt–Pd enable the SO_x to be highly active and sensitive to sarcosine. Under the optimized conditions, the prepared biosensor has a wide linear detection range to sarcosine from 1 to 1000 µM with a low limit of detection of 0.16 µM (S/N = 3) and a sensitivity of 84.1 µA/mM cm². Besides, the reliable response in serum samples shows its potential in the early diagnosis of prostate cancer. More importantly, the successful construction and application of the amperometric biosensor based on Ti₃C₂T_X/Pt–Pd will provide a meaningful reference for detecting other cancer biomarkers.     

Adsorption-Inhibition of Clathrate Hydrates by Self-Assembled Nanostructures

The mechanism by which safranine O (SFO), an ice growth inhibitor, halts the growth of single crystal tetrahydrofuran (THF) clathrate hydrates was explored using microfluidics coupled with cold stages and fluorescence microscopy. THF hydrates grown in SFO solutions exhibited morphology changes and were shaped as truncated octahedrons or hexagons. Fluorescence microscopy and microfluidics demonstrated that SFO binds to the surface of THF hydrates on specific crystal planes. Cryo-TEM experiments of aqueous solutions containing millimolar concentrations of SFO exhibited the formation of bilayered lamellae with an average thickness of 4.2±0.2 nm covering several μm². Altogether, these results indicate that SFO forms supramolecular lamellae in solution, which might bind to the surface of the hydrate and inhibit further growth. As an ice and hydrate inhibitor, SFO may bind to the surface of these crystals via ordered water molecules near its amine and methyl groups, similar to some antifreeze proteins.     

培养高阶思维和核心素养的高考有效复习——以“从海洋到餐桌上的碘”为例

选择学生比较熟悉的碘元素,结合海带提碘和精碘制碘酸钾工业生产情境展开复习教学,综合利用元素性质、反应原理探索含碘物质之间相互转化的最优路径,并对转化过程中的某些现象进行实验探究。通过设置有梯度的问题串引导学生在思考、分析、探究、归纳中完成综合型学习任务,实现知识规律化和体系化整合以及高阶思维培养。     

Applications of two-way satellite time and frequency transfer in the BeiDou navigation satellite system

A two-way satellite time and frequency transfer(TWSTFT) device equipped in the BeiDou navigation satellite system(BDS)can calculate clock error between satellite and ground master clock. TWSTFT is a real-time method with high accuracy because most system errors such as orbital error, station position error, and tropospheric and ionospheric delay error can be eliminated by calculating the two-way pseudorange difference. Another method, the multi-satellite precision orbit determination(MPOD)method, can be applied to estimate satellite clock errors. By comparison with MPOD clock estimations, this paper discusses the applications of the BDS TWSTFT clock observations in satellite clock measurement, satellite clock prediction, navigation system time monitor, and satellite clock performance assessment in orbit. The results show that with TWSTFT clock observations, the accuracy of satellite clock prediction is higher than MPOD. Five continuous weeks of comparisons with three international GNSS Service(IGS) analysis centers(ACs) show that the reference time difference between BeiDou time(BDT) and golbal positoning system(GPS) time(GPST) realized IGS ACs is in the tens of nanoseconds. Applying the TWSTFT clock error observations may obtain more accurate satellite clock performance evaluation in the 104 s interval because the accuracy of the MPOD clock estimation is not sufficiently high. By comparing the BDS and GPS satellite clock performance, we found that the BDS clock stability at the 103 s interval is approximately 10.12, which is similar to the GPS IIR.     

Effect of poly(methylhydrogen)siloxane modification on adjusting mechanical properties of bamboo flour‐reinforced HDPE composites

Cellulose - Poly(methylhydrogen)siloxane (PMHS) was applied for hydrophobic modification of bamboo flour (BF) at room temperature based on the dehydrogenation between hydroxyl groups of BF and...     

Controlled migration of antifog additives from LLDPE compatibilized with LLDPE grafted maleic anhydride

This paper summarizes a study of controlled migration of an antifog (AF) additive; sorbitan monooleate (SMO), from linear low density polyethylene (LLDPE) films containing a compatibilizer, LLDPE grafted maleic anhydride (LLDPE‐g‐MA). LLDPE/LLDPE‐g‐MA/SMO blends were prepared by melt compounding. Bulk and surface properties of compression molded LLDPE films containing SMO and LLDPE‐g‐MA were characterized using Fourier transform infrared spectroscopy and contact angle measurements. Thermal properties were investigated using a thermal gravimetric analyzer. Diffusion coefficient (D) was calculated, and AF properties were characterized using a “hot fog” test. Compression molded films were characterized for their morphology using high‐resolution scanning electron microscopy, and rheological properties were measured using a parallel‐plate rotational rheometer. It was found that the LLDPE/LLDPE‐g‐MA/SMO systems are characterized by a slower SMO migration rate, a lower diffusion coefficient, and lower contact angle values compared with LLDPE/SMO blends. These results are well correlated with results of a hot fog test. Morphological studies revealed a very fine dispersion of SMO in the LLDPE films, when 3 phr LLDPE‐g‐MA was combined with 1 phr SMO. Thermal analysis results show that the incorporation of 3 phr LLDPE‐g‐MA and 1 phr SMO significantly increases the decomposition temperature of the blend at T > 400°C. At high shear rates, the LLDPE blends show that the AF and the compatibilizer have a lubrication effect on LLDPE. Copyright © 2014 John Wiley & Sons, Ltd.     

Synthesis of Chiral Exocyclic Amines by Asymmetric Hydrogenation of Aromatic Quinolin‐3‐amines

Asymmetric hydrogenation of aromatic quinolin‐3‐amines was successfully developed with up to 94 % enantiomeric excess (ee). Introduction of the phthaloyl moiety to the amino group is crucial to eliminate the inhibition effect caused by the substrate and product, to activate the aromatic ring, and to improve the diastereoselectivity. This new methodology provides direct and facile access to chiral exocyclic amines. Notably, this report is the first on the highly enantioselective hydrogenation of aromatic amines.     

Facile Mechanochemical Synthesis of Nano SnO2/Graphene Composite from Coarse Metallic Sn and Graphite Oxide: An Outstanding Anode Material for Lithium‐Ion Batteries

A facile method for the large‐scale synthesis of SnO₂ nanocrystal/graphene composites by using coarse metallic Sn particles and cheap graphite oxide (GO) as raw materials is demonstrated. This method uses simple ball milling to realize a mechanochemical reaction between Sn particles and GO. After the reaction, the initial coarse Sn particles with sizes of 3–30 μm are converted to SnO₂ nanocrystals (approximately 4 nm) while GO is reduced to graphene. Composite with different grinding times (1 h 20 min, 2 h 20 min or 8 h 20 min, abbreviated to 1, 2 or 8 h below) and raw material ratios (Sn:GO, 1:2, 1:1, 2:1, w/w) are investigated by X‐ray diffraction, X‐ray photoelectron spectroscopy, field‐emission scanning electron microscopy and transmission electron microscopy. The as‐prepared SnO₂/graphene composite with a grinding time of 8 h and raw material ratio of 1:1 forms micrometer‐sized architected chips composed of composite sheets, and demonstrates a high tap density of 1.53 g cm^?3. By using such composites as anode material for LIBs, a high specific capacity of 891 mA h g^?1 is achieved even after 50 cycles at 100 mA g^?1.     

Synthesis of Rhenabenzenes from the Reactions of Rhenacyclobutadienes with Ethoxyethyne

Treatment of Na[Re(CO)₅] with RC?CCO₂Et (R=phenyl, naphthalen‐1‐yl, phenanthren‐9‐yl and pyren‐1‐yl) followed by reaction with acetyl chloride and ethanol afforded the rhenacyclobutadienes Re{‐C(R)?C(CO₂Et)C(OEt)?}(CO)₄. Reactions of these rhenacyclobutadienes with HC?COEt produced rhenabenzenes Re{‐C(R)?C(CO₂Et)C(OEt)?CHC(OEt)?}(CO)₄. Except for R=Ph, new rhenacyclobutadienes with pendant alkenyl substituents Re{‐C(R)?C(C(OEt)?CH(CO₂Et))C(OEt)?}(CO)₄ were also isolated from these reactions. The NMR spectroscopic and X‐ray structural data, as well as the aromatic stabilization energy (ASE) values suggest that the rhenabenzenes are aromatic, with extensive delocalized π character.