弯曲狭窄管内血液流的分析

与血管狭窄有关的异常血液动力学特征在血管疾病的发生和发展过程中起着重要的作用,由于血管狭窄和弯曲的综合影响,将会出现一系列有趣的流体力学现象,本文研究具有对称狭窄的弯曲小动脉内定常血液流动,在一定的假设条件下,直接从支配血液流动的Navier-Stokes方程求出问题的摄动解,由此求得弯曲狭窄管內血液流动的轴向速度、二次流速度及压力梯度等分析表达式,并进一步求得轴向和周向血管壁切应力。本文的结果是先前有关狭窄直管和弯曲均匀管流动研究的拓广。     

Convenient synthesis of chiral H4-BINOL via direct hydrogenation of BINOL

<正>A simple,highly effective hydrogenation of chiral BINOL to provide H_4-BINOL in multigram scale with good yield(up to 78% yield) was developed.A series of heterogeneous catalysts was tested in the hydrogenation;;the best result was obtained with 5%Pd/ C in EtOH under the H_2 pressure of 50 bar for 2 h.This method is a more useful method for practical synthesis of optically pure H_4- BINOL than other available methods.     

99mTc-AMD3100: A novel potential receptor-targeting radiopharmaceutical for tumor imaging

<正>The chemokine CXCR4 receptor is over-expressed in a wide variety of tumors.In this study,AMD3100,which was a prototype non-peptide antagonist of CXCR4 receptor,was labeled with ~(99m)Tc.~(99m)Tc-AMD3100 was verified by thin layer radio chromatography(TLRC).The tumor-localizing properties of ~(99m)Tc-AMD3100 were evaluated and proved in mice bearing Hep-G2 tumor xenograft.~(99m)Tc-AMD3100 was a promising,novel receptor-specific radiopharmaceutical with potential application in the imaging of human tumors.     

发展二氧化碳的绿色高新精细化工产业链建设低碳生态产业园

本文开发了从烯烃生产环氧烷烃,二氧化碳合成碳酸二甲酯联产二元醇,以绿色化学原料碳酸二甲酯代替剧毒的光气,开发了碳酸甲乙(丙、丁、戊、己、辛酯)、二乙(丙、丁、戊、己、辛)酯、二苯酯、呋喃唑酮、碳酰肼、苯胺基甲酸甲酯、苄胺基甲酸甲酯、对苯二胺二甲酸甲酯、间羟苯胺基甲酸甲酯、间甲苯胺基甲酸甲酯、二胺基甲酸甲酯二苯甲烷、己二胺二甲酸甲酯、烷基胺甲酸甲酯、肼基甲酸甲酯、嘧黄隆、甲黄隆、氯黄隆、异氰酸酯、聚氨酯、聚碳酸酯等一系列绿色清洁生产新工艺,间接实现了二氧化碳替代剧毒的光气,形成了具有中国特色的二氧化碳的绿色高新精细化工产业链,可建设成为低碳生态产业园。     

A deuterium-palladium electrode as a new sensor in non-aqueous solutions: potentiometric titration of weak acids in acetonitrile and benzonitrile

A deuterium-palladium electrode was employed as a new indicator electrode for the titration of weak acids in acetonitrile and benzonitrile. The investigated electrode showed a linear dynamic response for p-toluenesulfonic acid in the concentration range from 0.001 M to 0.1 M with a Nernstian slope of 48 mV in acetonitrile. Sodium methylate, potassium hydroxide and tetrabutylammonium hydroxide proved to be very suitable titrating agents for these titrations. The response time was less than 10-11 s and the lifetime of the electrode was limitless. Advantages of the electrode are: long-term stability, fast response, reproducibility, easy preparation and low cost.     

Electrochemical and Electrochemiluminescence Determination of Cancer Cells Based on Aptamers and Magnetic Beads

The electrochemical and electrochemiluminescence (ECL) detection of cell lines of Burkitt’s lymphoma (Ramos) by using magnetic beads as the separation tool and high‐affinity DNA aptamers for signal recognition is reported. Au nanoparticles (NPs) bifunctionalized with aptamers and CdS NPs were used for electrochemical signal amplification. The anodic stripping voltammetry technology employed for the analysis of cadmium ions dissolved from CdS NPs on the aggregates provided a means to quantify the amount of the target cells. This electrochemical method could respond down to 67 cancer cells per mL with a linear calibration range from 1.0×10² to 1.0×10⁵ cells mL^?1, which shows very high sensitivity. In addition, the assay was able to differentiate between target and control cells based on the aptamer used in the assay, indicating the wide applicability of the assay for diseased cell detection. ECL detection was also performed by functionalizing the signal DNA, which was complementary to the aptamer of the Ramos cells, with tris(2,2‐bipyridyl) ruthenium. The ECL intensity of the signal DNA, replaced by the target cells from the ECL probes, directly reflected the quantity of the amount of the cells. With the use of the developed ECL probe, a limit of detection as low as 89 Ramos cells per mL could be achieved. The proposed methods based on electrochemical and ECL should have wide applications in the diagnosis of cancers due to their high sensitivity, simplicity, and low cost.     

Enantioselective synthesis of bicylco[3.2.1]octan-8-ones using a tandem Michael-Henry reaction

Bicyclo[3.2.1]octan-8-ones have been prepared from a tandem Michael-Henry reaction between cyclohexane-1,2-diones and nitroalkenes using a quinine-derived thiourea as the catalyst. Although four stereogenic centers were created during the reaction, only two diastereomers were obtained in good diastereoselectivity and high enantioselectivity (92-99% ee). When 3-methylcyclohexane-1,2-dione (R¹=Me) was used as the substrate, only the regioisomeric product of the corresponding thermodynamic enolate was obtained.     

An efficient route to 4-substituted coumarins, 2(5H)-furanones, and pyrones via palladium-catalyzed couplings of alkenyl tosylates with organoindium reagents

Highly efficient palladium-catalyzed couplings of alkenyl tosylates with organoindium reagents under mild conditions are described, which give rise to 4-substituted coumarins, 2(5H)-furanones, and pyrones in good to excellent yields.     

Fabrication of Bienzymatic Glucose Biosensor Based on Novel Gold Nanoparticles‐Bacteria Cellulose Nanofibers Nanocomposite

An exploration of gold nanoparticles–bacterial cellulose nanofibers (Au‐BC) nanocomposite as a platform for amperometric determination of glucose is presented. Two enzymes, glucose oxidase (GOx) and horseradish peroxidase (HRP) were immobilized in Au‐BC nanocomposite modified glassy carbon electrode at the same time. A sensitive and fast amperometric response to glucose was observed in the presence of electron mediator (HQ). Both of GOx and HRP kept their biocatalytic activities very well in Au‐BC nanocomposite. The detection limit for glucose in optimized conditions was as low as 2.3 µM with a linear range from 10 µM to 400 µM. The biosensor was successfully applied to the determination of glucose in human blood samples.     

Effect of Zn on the adsorption of CO on Pd(111)

Introduction of a second metal can greatly modify the surface reactivity of a host metal. Recently Jeroro and Vohs found that Pd(111) deposited with 0.03-0.06 monolayer of Zn might possess unique activity to methanol steam reforming reaction. To investigate the distribution of the deposited Zn, we examined the adsorption of CO on two types of model systems. In the first model, Zn is in the top-layer of Pd(111) only, while in the second model Zn is placed in the subsurface exclusively. It is found that Zn atoms in the topmost layer show negligible effect on CO adsorption especially at hollow sites, whereas the second layer Zn atoms affect significantly the interaction of CO with the substrate. It is revealed that the negligible influence of the first layer Zn on CO adsorption is due to the offsetting of the ligand effect by the strain effect. On the other hand, the ligand effect dominates the CO adsorption in the second model where the strain effect is insignificant. It is demonstrated that the d-band centers correlate well with the binding energies of the second model, whereas no such good correlation exists for the first model. Our results show that the subsurface plays a more important role and the observed dramatic modification of surface reactivity of Pd(111) deposited with 0.03-0.06 ML Zn is most likely originated from the subsurface Zn atoms, if the coverage is not underestimated and the deposited Zn atoms are distributed uniformly within a layer.