Molecular structure and polarity of the C3NH carbene

Ab initio MP 2/4-31G ** calculations indicate that the most stable form of C₃NH is bent and singlet and that the linear structure corresponds to a maximum. The effect of changing the CNH angle on the total energy is slight, but it is quite pronounced on the molecular polarity. The wider angle tends to increase the polarity of C₃NH. MP 2/4-31G ** calculations predict a difference of polarity between linear and bent structures of 0.8 D.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

The Effects of Beating,Web Forming and Sizing on the Surface Energy of <Emphasis Type="Italic">Eucalyptus globulus</Emphasis> Kraft Fibres Evaluated by Inverse Gas Chromatography

In this work attention has been focused on the effects of papermaking beating, web forming and sizing operations on the physical/chemical surface properties of bleached Eucalyptus globulus kraft fibres. Inverse gas chromatography (IGC) was used to determine the dispersive component of surface tension (γ_s^d) as well as the acidic/basic character (according to the Lewis concept) of the solid surfaces (pulp fibres and pulp handsheets). The results have shown that the main effect of beating is to increase the fibre's Lewis acidic character. Web forming caused a strong decrease in γ_s^d and significant increments in the adhesion works of both acidic and basic probes, lowering the ratio between the two. Nevertheless, the surface of handsheets still exhibited a dominant acidic character. The sizing operation did not change the dispersive component of the surface tension significantly but decreased the difference between the adhesion works of the acidic and basic probes, rendering the handsheet surface less Lewis acidic and more Lewis basic. Thus, although internal sizing is expected to strongly influence liquid spreading at the paper surface and liquid penetration of the fibre's network, it is concluded that beating and web forming lead to important changes in the surface energetic properties of the Eucalyptus globulus kraft fibres.     

Luminescent Sensing with Quantum Dots

Summary This review highlights recent advances in the use of quantum dots (QD’s) as luminescent sensors. The bulk of the study concentrates on systems that possess organic ligands bound to the surface of QD’s. These ligands vary from low molecular weight thiols to larger molecules such as maltose binding protein. All have one thing in common: when a target analyte binds to the ligand/receptor, a perturbation of the system occurs, that registers itself as a change in the luminescence intensity of the QD. Two main mechanisms are prevalent in controlling the luminescent intensity in such systems. The first is Photoinduced Electron Transfer (PET) and the second energy transfer. This review looks at current sensors that operate by using these mechanisms. Two component systems are also investigated where a quencher is first added to a solution of the QD, followed by addition of the target analyte that interacts with the quencher to influence the luminescence intensity.     

On the High Viscosity of Aqueous Solution of Lysozyme Induced by Some Organic Solvents

A remarkably high viscosity has been induced in protein aqueous solutions by the addition of certain structurally related organic solvents. The effect has been observed for lysozyme aqueous solutions containing tetramethylurea (TMU), dimethylsulfoxide (DMSO), dimethylformamide, and hexamethylphosphortriamide. The effect has also been induced in ferrocytochrome c aqueous solutions by TMU. Critical concentrations for both the protein and organic solvent were verified for the onset of the viscosity increase. A common feature of the solvents which were able to induce the effect is a dipolar moiety (C=O, S → O and P → O) and a nonpolar region represented by the methyl groups. The resulting fluids show an extremely restricted flow and a typical non-Newtonian, pseudoplastic behavior. Use was made of¹H nuclear magnetic resonance (NMR) and Raman spectroscopy to characterize protein structural modifications and of¹³C NMR to investigate changes in relaxation times and chemical shifts in the solvent/water solutions. A systematic rheological characterization of the systems was undertaken for some of the solvents, and unusual patterns of viscous effects were identified for the solvent/water systems both with and without protein. The process was found to be at least partially reversible, as concluded from the recovered original solution rheological characteristics and the original protein¹H NMR spectrum, after eliminating the organic solvent by ultrafiltration. The whole process was characterized as consisting of two mutually independent stages. The first involves an extensive conformational transition of the polypeptide backbone, from a predominantly α-helical to increased random coiled and β-sheet structures, with the occurrence of nonorthodox protein secondary structures at regions above the solvent critical point. The second stage consists of short-lived interchain contacts leading to an entanglement of the macromolecular system as a whole. A microphase reversion in the organic solvent/water mixture, supported by¹³C NMR and rheological results, is proposed as the driving force causing the observed behavior.     

Determination of dopamine in synthetic cerebrospinal fluid by SWV with a graphite–polyurethane composite electrode

This work describes an electroanalytical investigation of dopamine using cyclic voltammetry (CV) and the graphite–polyurethane composite electrode (GPU). In CV studies, well-defined redox peaks characterize the oxidation process at the GPU electrode, which is indicative of electrocatalytic effects associated with active sites on the GPU electrode surface. A new analytical methodology was developed using the GPU electrode and square wave voltammetry (SWV) in BR buffer solution (0.1 mol L^–1; pH 7.4). Analytical curves were constructed under optimized conditions (f=60s^–1, E_a=50 mV, E_I=2 mV) and detection and quantification limits of 6.4×10^–8 mol L^–1 (12.1 g L^–1) and 5.2×10^–6 mol L^–1 (0.9 mg L^–1), respectively, were achieved. The precision of the method was checked by performing ten successive measurements for a 9.9×10^–6 mol L^–1 dopamine solution. For intra-assay and inter-assay precisions, the relative standard deviations were 1.9 and 2.3%, respectively. In order to evaluate the developed methodology, the determination of dopamine was performed with good sensitivity and selectivity, without the interference of ascorbic acid in synthetic cerebrospinal fluid, which indicates that the new methodology enables reliable analysis of dopamine.     

Composting of urban solid residues (USR) by different dispositions

The thermal behavior and non-isothermal kinetics of thermal decomposition of three different kinds of composting of the USR like: stack with drilled PVC tubes (ST), revolved stack (SR) and stack with material of structure (SM), from the usine of composing of Araraquara city, Săo Paulo state, Brazil, within a period of 132 days of composting were studied. Results from TG, DTG and DSC curves obtained on inert atmosphere indicated that the cellulosic fraction present, despite the slow degradation during the composting process, is thermally less stable than other substances originated from that process. Due to that behavior, the cellulosic fraction decomposition could be kinetically evaluated through non-isothermal methods of analysis. The values obtained were: average activation energy, Ea=248, 257 and 259 kJ mol^-1 and pre- exponential factor, logA=21.4, 22.5, 22.7 min^-1, to the ST, SR and SM, respectively. From Ea and logA values and DSC curves, Málek procedure could be applied, suggesting that the SB (Šesták-Berggren) kinetic model is the appropriated one to the first thermal decomposition step. This revised version was published online in July 2006 with corrections to the Cover Date.     

LCAO–MO similarity measures and taxonomy

Similarity measures between pairs of molecular wave functions are described. They are based on the geometrical structure of the LCAO–MO framework and upon multivariate analysis ideas. The theoretical framework is presented, and formulae for some integrals needed are given. Two main measures, distance and correlation coefficients, are used. Distance and correlation matrices induce relationships in the whole MO set, which can be depicted through minimal spanning tree techniques. Furthermore, principal component analysis allows a two-dimensional visualization of the Mo manifold geometrical relationships. Various examples are given in order to obtain information on how basis set, environment, excitation, bending, stretching, and electronegativity affect the induced order. For this purpose “ab initio” SCF–LCAO–MO calculations with double- and single-zeta quality basis sets have been used for various simple molecular structures: H₂O, NH₃, CH₄, N₂, O₂, C₂, NO, CN, and CO. The results obtained can open the way to LCAO–MO taxonomy. Using this information, other areas of interest are connected with similarity measures (SCF and CI , localization procedures, etc.), proving in this manner their potential utility.     

Screening and analytical confirmation of sulfonamide residues in milk by capillary electrophoresis-mass spectrometry

A new methodology is proposed to automate the monitoring of sulfonamide residues in milk samples. It combines a screening unit for the total amount of sulfonamide with capillary electrophoresis-mass spectrometry (CE-MS) equipment for processing the samples containing a detectable level of sulfonamide. The screening unit consists of continuous-flow system (CFS) to precipitate the proteins connected on-line to the CE-MS equipment, in which a common characteristic ion of all sulfonamides was monitored with the MS detector by flushing the sample through the capillary. The confirmatory method is based on the purification and preconcentration of sulfonamides in a CFS unit and posterior analysis by CE-MS. The sample treatment unit was also on-line connected to the CE-MS equipment. In order to increase sensitivity, the flow rate of the sheath liquid was diminished from 0.5 to 0.2 microL.min(-1) by increasing the content in water from 0 to 50% and the formic acid from 0.5 to 1.5% in this liquid and by applying an overimposed pressure of 5 mbar during the electrophoretic separation. The method allowed the analysis of 30 samples per hour.