Inhibitive properties of a phosphonate-based formulation for corrosion control of carbon steel

The aim of the present work was to study the corrosion inhibition of carbon steel using a ternary formulation. This new ternary inhibitor formulation, viz., 2-phosphonobutane-1,2,4-tricarboxylic acid (PBTC), with zinc ions and silicate ions was used to protect carbon steel from corrosion in a low-chloride environment. The gravimetric studies showed that 96 % inhibition efficiency was achieved with the ternary system consisting of 50 ppm PBTC, 50 ppm Zn²⁺ ions, and 10 ppm silicate ions. Out of 0.310 mmol of Zn²⁺ ions, 0.218 mmol was diffused from the bulk of the solution to the metal surface, as revealed from the studies of the solutions by atomic absorption spectroscopy (AAS). Electrochemical methods (potentiostatic polarization and electrochemical impedance spectroscopy) and surface characterization techniques [Fourier transform infrared (FT-IR), scanning electron microscopy (SEM), and atomic force microscopy (AFM)] were used to ascertain the nature of the protective film and for explaining the mechanistic aspects of corrosion inhibition.     

A highly sensitive LC‐MS/MS method for the determination of S‐citalopram in rat plasma: application to a pharmacokinetic study in rats

A highly sensitive, rapid assay method has been developed and validated for the estimation of S‐citalopram (S‐CPM) in rat plasma with liquid chromatography coupled to tandem mass spectrometry with electrospray ionization in the positive‐ion mode. The assay procedure involves a simple liquid–liquid extraction of S‐CPM and phenacetin (internal standard, IS) from rat plasma with t‐butyl methyl ether. Chromatographic separation was operated with 0.2% formic acid:acetonitrile (20:80, v/v) at a flow rate of 0.50 mL/min on a Symmetry Shield RP₁₈ column with a total run time of 3.0 min. The MS/MS ion transitions monitored were 325.26 → 109.10 for S‐CPM and 180.10 → 110.10 for IS. Method validation and pre‐clinical sample analysis were performed as per FDA guidelines and the results met the acceptance criteria. The lower limit of quantitation achieved was 0.5 ng/mL and the linearity was observed from 0.5 to 5000 ng/mL. The intra‐ and inter‐day precisions were in the range of 1.14–5.56 and 0.25–12.3%, respectively. This novel method has been applied to a pharmacokinetic study and to estimate brain‐to‐plasma ratio of S‐CPM in rats. Copyright © 2010 John Wiley & Sons, Ltd.     

Non-adiabatic gravitational collapse of charged radiating fluid spheres

Dynamical equations governing the non-adiabatic collapse of a shear-free spherical distribution of unisotropic matter in the presence of charge are obtained. A brief outline of constructing a model describing collapse of a charged radiating fluid sphere in the set up developed is given.     

On the Distribution of the Sum of n Non-Identically Distributed Uniform Random Variables

The distribution of the sum of independent identically distributed uniform random variables is well-known. However, it is sometimes necessary to analyze data which have been drawn from different uniform distributions. By inverting the characteristic function, we derive explicit formulae for the distribution of the sum of n non-identically distributed uniform random variables in both the continuous and the discrete case. The results, though involved, have a certain elegance. As examples, we derive from our general formulae some special cases which have appeared in the literature.     

Theoretical insight of nitric oxide adsorption on neutral and charged Pdn (n = 1–5) clusters

Density functional theory (DFT) calculations within the framework of generalized gradient approximation have been used to systematically investigate the adsorption of nitric oxide (NO) molecule on neutral, cationic, and anionic Pd_n (n = 1–5) clusters. NO coordinate to one Pd atom of the cluster by the end‐on mode, where the tilted end‐on structure is more favorable due to the additional electron in the π* orbital. On the contrary, in the neutral and cationic Pd₂ system, NO coordinates to the bridge site of cluster preferably by the side‐on mode. Charge transfer between Pd clusters and NO molecule and the corresponding weakening of N? O bond is an essential factor for the adsorption. The N? O stretching frequency follow the order of cationic > neutral > anionic. Binding energy of NO on anionic clusters is found to be greater than those of neutral and cationic clusters. © 2015 Wiley Periodicals, Inc.     

An Efficient Enantioselective Synthesis of Natural Gingerols,the Active Principles of Ginger

A straightforward synthesis of (S)‐gingerols 1 – 3 has been described. The requisite stereogenic center in the target molecules was introduced by Sharpless asymmetric dihydroxylation using a chiral complex, AD‐mix β. This route is simple and efficient to prepare the products in very good yields.     

Selective Halogenation Using an Aniline Catalyst

Electrophilic halogenation is used to produce a wide variety of halogenated compounds. Previously reported methods have been developed mainly using a reagent‐based approach. Unfortunately, a suitable “catalytic” process for halogen transfer reactions has yet to be achieved. In this study, arylamines have been found to generate an N‐halo arylamine intermediate, which acts as a highly reactive but selective catalytic electrophilic halogen source. A wide variety of heteroaromatic and aromatic compounds are halogenated using commercially available N‐halosuccinimides, for example, NCS, NBS, and NIS, with good to excellent yields and with very high selectivity. In the case of unactivated double bonds, allylic chlorides are obtained under chlorination conditions, whereas bromocyclization occurs for polyolefin. The reactivity of the catalyst can be tuned by varying the electronic properties of the arene moiety of catalyst.     

Poly(vinyl alcohol)-α-chitin composites reinforced by oil palm empty fruit bunch fiber-derived nanocellulose

Poly(vinyl alcohol)-α-chitin composite films reinforced by oil palm empty fruit bunch fiber-derived nanocellulose were prepared by casting technique. Fourier transform infrared spectroscopy analysis revealed partial miscibility between chitin and poly(vinyl alcohol) through hydrogen bonding, as supported by differential scanning calorimetry and field emission scanning electron microscopy. Tensile strength of the poly(vinyl alcohol)/chitin films increased with α-chitin content varied from 10 to 30?wt%, which was from 29.06 to 39.27?MPa. With the addition of 1?wt% nanocellulose, a maximum improvement of 57.64 and 50.66% in terms of tensile strength and Young’s modulus was achieved, respectively.