Synthesis of Two Alnustone-Like Natural Diarylheptanoids via 4 + 3 Strategy

The first total synthesis of (4E,6E)-1,7-bis(3,4-dihydroxyphenyl)-hepta-4,6-dien-3-one and an alternative synthesis of (4E,6E)-1,7-bis(4-hydroxyphenyl)-hepta-4,6-dien-3-one, two natural diarylheptanoids, mainly based on Claisen–Schmidt condensation were described. The crucial steps of the syntheses were the condensation of OH-protected 4-aryl-2-butanones with OH-protected 3-aryl-acrylaldehydes by the in situ enamination and then deprotection of OH groups to give the corresponding natural diarylheptanoids.     

Development of a new analytical method for Pb preconcentration and its further determination in water and foodstuffs using relatively low-sensitivity flame atomic absorption spectrometry

The present study describes chelation of Pb(II) with ascorbic acid and formation of a charge-transfer sensitive ion-pair in the presence of Rhodamine 6G at pH 5.5, and then its extraction to the micellar phase of non-ionic surfactant, PONPE 7.5 by an ultrasound-assisted cloud point extraction method before analysis by FAAS. The various variables affecting ion-pair formation and extraction efficiency were studied and optimised. Under the optimised conditions, the good linear relationships in the ranges of 0.4–150 μg L^?1 and 0.8–120 μg L^?1 for solvent-based calibration and matrix-matched calibration curves, respectively, were achieved with a pre-concentration factor of 71.4 from pre-concentration of 50-mL sample. Moreover, the limits of detection with good sensitivity enhancements of 124 and 114.5 were 0.13 and 0.24 μg L^?1, respectively, while the intra-day and inter-day precision (as RSD%, for five replicate measurements of 5 and 100 μg L^?1 in the same day and three succeed days) were in range of 2.8–5.4% and 3.7–6.3%, respectively. The matrix effect on triplicate determination of 50 µg L^?1 Pb(II) was also investigated. The accuracy of the method was statistically verified by the analysis of two certified reference materials (CRMs) after digestion with acid mixtures (HNO₃-H₂O₂-HF and HNO₃-H₂O₂) and dilution at suitable ratios. It has been observed that there is statistically not a significant difference between the certified- and found-values. The accuracy was also controlled using the pre-treated sample solutions spiked at different concentration levels, and the good spiked recoveries were obtained in range of 90–102.8%. The method was successfully applied to the determination of trace amounts of lead in water and food matrices with satisfactory results.     

Enantioselective Addition of Diethylzinc to Aromatic Aldehydes Using Chiral Oxazoline-Based Ligands

Russian Journal of Organic Chemistry - Chiral oxazoline ligands containing an aromatic ring were prepared from norephedrine and pyrrole-2-carbonitrile or 2-hydroxybenzoyl chloride. The synthesized...     

Exact solution of Schrödinger equation for Pseudoharmonic potential

Exact solution of Schr?dinger equation for the pseudoharmonic potential is obtained for an arbitrary angular momentum. The energy eigenvalues and corresponding eigenfunctions are calculated by Nikiforov–Uvarov method. Wavefunctions are expressed in terms of Jacobi polynomials. The energy eigenvalues are calculated numerically for some values of ℓ and n with n ≤ 5 for some diatomic molecules.      

Synthesis and characterization of polymeric Pd(II), Pt(IV), and Au(III) complexes of 2,2′-(1,4-phenylenedivinylene)-bis-8-hydroxyquinoline

The complexes of 2,2′-(1,4-Phenylenedivinylene)-bis-8-hydroxyquinoline (LH₂) with K₂PdCl₄, H₂PtCl₆ and HAuCl₄ were synthesized and characterized with ¹H-and ¹³C-NMR, elemental analysis, FT-IR, and molar conductivity. Au(III) and Pt(IV) complexes have characteristic conductance, while the Pd(II) complex has a non-ionic structure according to the molar conductivity and elemental analysis. This text was submitted by authors in English.     

Synthesis and spectroscopic studies of mixed-ligand and polymeric dinuclear transition metal complexes with bis-acylhydrazone tetradentate ligands and 1,10-phenanthroline

Two types of dinuclear copper(II) and nickel(II) complexes with two tetradentate N2O2 donor ligands 1,4-bis(1-anthranoylhydrazonoethyl)benzene (L1), 1,4-bis(1-salicyloylhydrazonoethyl)benzene (L2) and N,N'-bidentate heterocyclic base [1,10-phenonthroline (phen)] have been synthesized and characterized by elemental analysis, infrared spectra, UV-vis electronic absorption spectra and magnetic susceptibility measurements. The reaction of metal(II) acetates with the solution containing ligand and 1,10-phenonthroline in methanol gives mixed-ligand dinuclear metal(II) complexes with general formula [M2L(phen)2]Cl2 (L=L1 or L2), whereas, the ligands react with metal(II) acetates to form polymeric dinuclear complexes with general formula [(M2L2)n] (L=L1 or L2). In the complexes, the ligands act as dianionic tetradentate and coordination takes place in the enol tautomeric form with the enolic oxygen and azomethine nitrogen atoms while the phenolic hydroxyl and amino groups of aroylhydrazone moiety do not participate in coordination. The effect of varying pH and solvent on the absorption behavior of both ligands and complexes has been investigated.     

Determination of polycyclic aromatic hydrocarbons in waters by ultrasound-assisted emulsification-microextraction and gas chromatography-mass spectrometry

An ultrasound-assisted emulsification-microextraction (USAEME) procedure was developed for the extraction of US EPA 16 polycyclic aromatic hydrocarbons (PAHs) in 10 mL of water samples, with subsequent determination by gas chromatography-mass spectrometry (GC-MS). After determination of the most suitable solvent and solvent volume, several other parameters (i.e., extraction time, centrifugation time and ionic strength of the sample) were optimized using a 2³ factorial experimental design. Limits of detection ranged from 0.001 to 0.036 μg L⁻¹. The developed procedure was applied to fortified distilled water with different fortification levels (0.5, 2 and 5 μg L⁻¹). Recoveries were over 92% and relative standard deviations of the recoveries were below 8%. The efficiency of the USAEME was compared with traditional liquid-liquid extraction (LLE) and solid-phase extraction on real water samples (i.e., tap water, well water and surface (lake) water as well as domestic and industrial wastewaters). The USAEME showed comparable efficiencies especially with LLE. The developed USAEME was demonstrated to be robust, viable, simple, rapid and easy to use for the determination of PAHs in water samples by GC-MS.     

Various polycarbonate graft copolymers via diels–alder click reaction

In this work, we used Diels–Alder click reaction for the preparation of various types of aliphatic polycarbonates (PCs). We first prepared a novel anthracene‐functionalized cyclic carbonate monomer, anthracen‐9‐ylmethyl 5‐methyl‐2‐oxo‐1,3‐dioxane‐5‐carboxylate (2), followed by ring‐opening polymerization of this monomer to prepare PC with pendant anthracene groups (PC‐anthracene) using 1,8‐diazabicyclo[5.4.0]undec‐7‐ene (DBU)/1‐(3,5‐bis(trifloromethyl)phenyl)‐3‐cyclohexylthiourea (TU) as the catalyst and benzyl alcohol as the initiator in CH₂Cl₂ at room temperature. Subsequently, the resulting PC‐anthracene (M_n,TDGPC = 6000 g/mol, M_w/M_n = 1.22) was grafted with a linear α‐furan protected‐maleimide terminated‐poly(methyl methacrylate) (PMMA‐MI) (M_n,GPC = 3100 g/mol, M_w/M_n = 1.31), or poly(ethylene glycol) (PEG‐MI) (M_n,GPC = 550 g/mol, M_w/M_n = 1.09), or a mixture of PMMA‐MI and PEG‐MI to yield well‐defined PC graft or hetero graft copolymers, PC‐g‐PMMA (M_n,TDGPC = 59000 g/mol, M_w/M_n = 1.22) or PC‐g‐PEG, or PC‐g‐(PMMA)‐co‐PC‐g‐(PEG) (M_n,TDGPC = 39900 g/mol, M_w/M_n = 1.16), respectively, using Diels–Alder click reaction in toluene at 110°C. The Diels–Alder grafting efficiencies were found to be over 97% using UV spectroscopy. Moreover, the structural analyses and the molecular weights of resulting graft copolymers were determined via ¹H NMR and triple detection GPC (TD‐GPC), respectively. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Determination of Cu(II), Fe(III), Mn(II) and Zn(II) in various samples after preconcentration with Rhizopus oryzae loaded natural cellulose (almond bark)

A procedure for the pre-concentration of Cu(II), Fe(III), Mn(II) and Zn(II) is described utilising a minicolumn of natural cellulose (almond bark) modified with fungus (Rhizopus oryzae) prior to their determination by high-resolution continuum source flame atomic absorption spectrometry (HR-CS FAAS). The optimum pre-concentration conditions such as pH and flow rate for the analytes have been investigated. The analytes were quantitatively retained on the column between pH 6 and 8. Elution was made with 10 mL 1 M HCl solution. Under the optimum conditions, recoveries were found as 97 ± 3%, 96 ± 3%, 98 ± 3% and 94 ± 2% for Cu(II), Fe(III), Mn(II) and Zn(II), respectively, at 95% confidence level. The detection limits obtained from preconcentration of 50 mL of blank solutions (n = 11) were 1.6, 1.8, 2.8 and 1.2 µg L^?1 for Cu(II), Fe(III), Mn(II) and Zn(II), respectively. Relative standard deviations (RSD) of the recoveries for five replicate analyses were lower than 3%. The proposed method was validated by analysing certified reference materials (Peach Leaves SRM 1547 and Fish Tissue IAEA-407). Determination of the Cu(II), Fe(III), Mn(II) and Zn(II) in K?z?l?rmak River water, green beans, beans leave and tomato leaves and fish (Tinca tinca) tissue samples was performed by the proposed method.