Quasioptical Approach for Meniscus Lens Corrected Horn: Application to Cassegrain Systems

The Beam Mode Expansion (BME) approach for corrugated conical feed horn plus meniscus lens is presented. This approach is useful for providing the radiation pattern as it propagates through an optical system. A developed theoretical model has been verified measuring near and far field of a built horn and lens. These results have been used for designing the optical system of a Cassegrain antenna at 100GHz using the fundamental Gaussian beam mode (GBM) of the new approach. Multimode analysis has been performed with the pre-designed system in order to test the fundamental GBM results.     

Design and application of double amplified recirculating ring structure for hybrid fibre buses

The design of a double-parallel amplified recirculating optical delay line utilizing an erbium-doped fibre amplifier for a fibre optical bus is described. This structure is used for amplifying, equalizing and filtering multicarrier signals coming from optoelectronic units attached to fibre couplers. The use of this structure for a hybrid multimode-singlemode fibre bus that includes optoelectronic units for sensors is also demonstrated.     

Addendum to “examples of semiperfect rings”

We fill a gap in [4], and provide a rigorous example of a local ringR whose Jacobson radical is locally nilpotent, butM ₂(R) is not strongly π-regular. The online version of the original article can be found at The work of the first author was partially supported by the DGICYT (Spain), through the grant PB92-0586, and by the Comissionat per Universitats i Recerca de la Generalitat de Catalunya.     

Necessary conditions and duality for inexact nonlinear semi-infinite programming problems

First order necessary conditions and duality results for general inexact nonlinear programming problems formulated in nonreflexive spaces are obtained. The Dubovitskii–Milyutin approach is the main tool used. Particular cases of linear and convex programs are also analyzed and some comments about a comparison of the obtained results with those existing in the literature are given.     

Low noise optical receiver with multi-octave bandwidth

Optical and Quantum Electronics - A new approach for the design and construction of low noise broadband optical receivers is presented utilizing distributed amplification based on hybrid integrated...     

Effect of excess halide on the palladium‐catalyzed insertion‐triggered radical copolymerization of methyl acrylate and 1‐hexene

[Pd₂(μ‐Cl)₂(C₆F₅)₂(tht)₂] ( 1 ) is a very efficient initiator of the radical polymerization of methyl acrylate, but it is not active in the polymerization of methyl methacrylate or in the copolymerization with 1‐hexene. The addition of an excess of NBu₄Cl to solutions of [Pd₂(μ‐Cl)₂(C₆F₅)₂(tht)₂] ( 1 ) provides an initiator system that copolymerizes methyl acrylate and 1‐hexene by an insertion‐triggered radical mechanism. Random copolymers are obtained with 11% incorporation of 1‐hexene in moderate yields (about 35%). Studies of the decomposition products obtained after the first insertion of methyl acrylate in the Pd? C₆F₅ bond of 1 show that the addition of excess halide in the presence of monomer favors the homolytic cleavage of the Pd? C bond, and the generation of the radicals that are active species in the polymerization, versus alternative evolution pathways. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5682–5691, 2006     

Metallocene copolymers of propene and 1‐hexene: The influence of the comonomer content and thermal history on the structure and mechanical properties

The relationships between the structure and properties have been established for copolymers of propylene and 1‐hexene synthesized with an isotactic metallocene catalyst system. The most important factor affecting the structure and properties of these copolymers is the comonomer content. The thermal treatment, that is, the rate of cooling from the melt, is also important. These factors affect the thermal properties, the degree of crystallinity, and therefore the structural parameters and the viscoelastic behavior. A slow cooling from the melt favors the formation of the γ phase instead of the α modification. Regarding the viscoelastic behavior, the β relaxation, associated with the glass‐transition temperature, is shifted to lower temperatures and its intensity is increased as the 1‐hexene content raises. The microhardness values are correlated with those of the storage modulus deduced from dynamic mechanical thermal analysis curves, and good linear relations have been obtained between these parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1253–1267, 2006     

Minicolumn field sampling--preconcentration of trace zinc from seawater and its laboratory detection by flow injection flame atomic absorption spectrometry.

A simple field sampling-preconcentration method for zinc determination in seawater is described. Seawater was collected in situ by pumping it through a minicolumn packed with a chelating resin (Chelite P) connected to a field flow preconcentration system (FFPS). These packed minicolumns retain the dissolved zinc, and once are loaded with the analyte, they are returned to the laboratory where they are sequentially inserted into a flow injection system for on-line zinc elution with diluted hydrochloric acid and flame atomic absorption spectrometric detection. A factorial design has been used to optimize the FFPS and the flow injection elution process. The proposed method has a linear calibration range from 0.07 to at least 9.4 microg L(-1) of zinc, with a detection limit of 0.02 microg L(-1) and a throughput of 26 samples h(-1). Validation was carried out against certified reference water samples. This procedure has been successfully applied to the determination of Zn in seawater samples from Galicia (Spain).