Designing of an Intensification Process for Biosynthesis and Recovery of Menaquinone-7

A nutritional food rich in menaquinone-7 has a potential in preventing osteoporosis and cardiovascular diseases. The static fermentation of Bacillus subtilis natto is widely regarded as an optimum process for menaquinone-7 production. The major issues for the bulk production of menaquinone-7 are the low fermentation yield, biofilm formation and the use of organic solvents for the vitamin extraction. In this study, we demonstrate that the dynamic fermentation involving high stirring and aeration rates enhances the yield of fermentation process significantly compared to static system. The menaquinone-7 concentration of 226 mg/L was produced at 1,000 rpm, 5 vvm, 40 °C after 5 days of fermentation. This concentration is 70-fold higher than commercially available food products such as natto. Additionally, it was found that more than 80 % of menaquinone-7 was recovered in situ in the vegetable oil that was gradually added to the system as an anti-foaming agent. The intensification process developed in this study has a capacity to produce an oil rich in menaquinone-7 in one step and eliminate the use of organic solvents for recovery of this compound. This oil can, therefore, be used for the preparation of broad range of supplementary and dietary food products rich in menaquinone-7 to reduce the risk of osteoporotic fractures and cardiovascular diseases.     

The effect of incorporation of ferrous titanate nanoparticles in sulfonated poly(ether ether ketone)/poly (amide imide) acid-base polymer for cations exchange membrane fuel cells

Journal of Solid State Electrochemistry - The sulfonated poly(ether ether ketone) (SPEEK) is one of the most promising aromatic proton exchange polymer membranes concerning fluorinated aliphatic...     

A Factorial Design Approach for Hydrothermal Synthesis of Phase‐Pure AgInO2: A Parametric Optimization Study

Owing to a wide range of industrial applications and fundamental importance, delafossite compounds have gathered tremendous interest in research community. In this study, the formation of hexagonal nanoplates of AgInO₂ mainly dominated by (00l) facets with no metallic Ag impurity, reported using a facile hydrothermal route at 180 °C using KOH as mineralizer by adopting a factorial design approach. Rietveld analysis of the powder XRD pattern and SAED confirms the rhombohedral system of AgInO₂. FE‐SEM image shows a uniform hexagonal plate‐like morphology with an average width of about 300 nm and thickness of 70 nm. XPS and EDX analysis confirm potassium ion free AgInO₂. A specific surface area of about 48.5 m² g^?1 is arrived from N₂ adsorption studies. Temperature‐dependent AC impedance measurements revealed an activation energy of 0.24 eV/f.u. Further, TG‐DTA studies found that the compound is stable in air up to 595 °C.     

Studies on the oxidation of α-amino acids by N-Bromo oxidants: Kinetics of the reaction of bromide ion with N-Bromoacetamide

The rate of oxidation of amino acids (AA) by N-Bromoacetamide (NBA) was studied in aqueous buffered medium at 35°C. The rate of disappearance of [NBA] is catalyzed by the Br⁻ produced from the reduction of NBA. Analysis of the autocatalyzed reaction gives the kinetic data for the oxidation of bromide ion by NBA. The results suggest that the protonated NBA reacts with Br⁻ to form Br₂ which rapidly oxidizes amino acids. The rate constant for the reaction between protonated NBA and Br⁻ at 35°C is estimated. © 1996 John Wiley & Sons, Inc.     

Selective reductions. 56. Exploration of the B-haloisopinocampheylboranes for asymmetric reduction of ketones

A series of diisopinocampheylhaloboranes and monoisopinocampheyldihaloboranes were synthesized by the reaction of the corresponding boranes with the respective HX or X₂ (X = halogen) or by the hydroboration of α-pinene with the corresponding haloboranes. Stabilities of these haloboranes in various solvents were studied. Most of these haloboranes proved capable of reducing prochiral ketones to the alcohols with significant optical induction. When tested against a representative aromatic and aliphatic prochiral ketone, acetophenone and 3-methyl-2-butanone, respectively, α-phenethyl alcohol in 65–98% ee and 3-methyl-2-butanol in 28–59% ee were obtained. Some of them exhibited anomalous behavior.     

Synthesis and characterization of ZSM-8-type zeolite crystals

Procedure for hydrothermal synthesis of ZSM-8-type zeolite crystals, using TEA—OH as a template, in the system having molar composition 16.2 (Na₂O) — Al₂O₃ — 117 (SiO₂) — 4.8 (TEA)₂O — 3887 H₂O at 170 °C is described. Results of characterization of these crystals by XRD, IR, EDAX, SEM, TGA, and adsorption studies are described and discussed. X-ray diffraction studies establish that the crystals are ZSM-8-type with structure similar to that of ZSM-5-type crystals. Crystals have prismatic bipyramidal morphology with average size 18–25 microns. Degased calcined samples adsorb xylenes in the order p > m > 0. Pore length per unit cell, estimated from n-hexane adsorption studies, is 46 Å.     

Recent Developments in Carbon-Based Nanocomposites for Fuel Cell Applications: A Review

Carbon-based nanocomposites have developed as the most promising and emerging materials in nanoscience and technology during the last several years. They are microscopic materials that range in size from 1 to 100 nanometers. They may be distinguished from bulk materials by their size, shape, increased surface-to-volume ratio, and unique physical and chemical characteristics. Carbon nanocomposite matrixes are often created by combining more than two distinct solid phase types. The nanocomposites that were constructed exhibit unique properties, such as significantly enhanced toughness, mechanical strength, and thermal/electrochemical conductivity. As a result of these advantages, nanocomposites have been used in a variety of applications, including catalysts, electrochemical sensors, biosensors, and energy storage devices, among others. This study focuses on the usage of several forms of carbon nanomaterials, such as carbon aerogels, carbon nanofibers, graphene, carbon nanotubes, and fullerenes, in the development of hydrogen fuel cells. These fuel cells have been successfully employed in numerous commercial sectors in recent years, notably in the car industry, due to their cost-effectiveness, eco-friendliness, and long-cyclic durability. Further; we discuss the principles, reaction mechanisms, and cyclic stability of the fuel cells and also new strategies and future challenges related to the development of viable fuel cells.     

Orientational information from TEDOR spectral sidebands.

In a dipolar-coupled spin-1/2 network of the type 15N1-(13)C-15N2, an assessment of the sensitivity of the N --> C and C --> N TEDOR sideband intensities to the Euler angles defining the orientation of the two heteronuclear dipolar vectors in the 13C and 15N chemical shift (CS) tensor principal axes system has been carried out via numerical calculations. The results clearly indicate the potential of TEDOR MAS NMR spectroscopy for the characterization of the CS tensor orientation in the molecular frame. The efficacy of the method has been experimentally illustrated by TEDOR studies on a polycrystalline sample of [1, 3-(15)N2, 2-(13)C]uracil, which is one of the four bases in RNA.     

Use of a graded gain random amplifier as an optical diode

The spectral characteristics of liquid amplifying media have been used to design and experimentally realize an optical device that prevents the propagation of a band of wavelengths in one direction and permits it in the opposite direction, thus acting as an optical diode. The addition of random scattering centers is shown to narrow the width of the forbidden band. A model is proposed to explain the observations and is verified by Monte Carlo simulations.