Microfluidic devices for energy conversion: planar integration and performance of a passive, fully immersed H2-O2 fuel cell

We describe the fabrication and performance of a passive, microfluidics-based H2-O2 microfluidic fuel cell using thin film Pt electrodes embedded in a poly(dimethylsiloxane) (PDMS) device. The electrode array is fully immersed in a liquid electrolyte confined inside the microchannel network, which serves also as a thin gas-permeable membrane through which the reactants are fed to the electrodes. The cell operates at room temperature with a maximum power density of around 700 microW/cm(2), while its performance, as recorded by monitoring the corresponding polarization curves and the power density plots, is affected by the pH of the electrolyte, its concentration, the surface area of the Pt electrodes, and the thickness of the PDMS membrane. The best results were obtained in basic solutions using electrochemically roughened Pt electrodes, the roughness factor, R(f), of which was around 90 relative to a smooth Pt film. In addition, the operating lifetime of the fuel cell was found to be longer for the one using higher surface area electrodes.     

A novel and highly efficient synthetic route to unsymmetrical organoselenides using cesium bases

A new and convenient one-pot method for the preparation of unsymmetrical selenides has been developed. In the presence of cesium hydroxide, molecular sieves, and DMF, benzeneselenol undergoes direct alkylation with various alkyl halides for the synthesis of alkyl phenyl selenides in moderate to excellent yields. Another method to prepare unsymmetrical organoselenides was also completed by coupling terminal alkynes with benzeneselenyl bromide. As an application, the synthesis of a selenopeptide was also accomplished. Furthermore, this methodology was extended to the synthesis of an organoselenide on solid support.     

Synthesis, structure, and dynamics of six-membered metallacoronands and metallodendrimers of iron and indium

In the reaction of the N-substituted diethanolamines (H(2)L(1-3)) (1-3) with calcium hydride followed by addition of iron(III) or indium(III) chloride, the iron wheels [Fe(6)Cl(6)(L(1))(6)] (4) and [Fe(6)Cl(6)(L(2))(6)] (6) or indium wheels [In(6)Cl(6)(L(1))(6)] (5), [In(6)Cl(6)(L(2))(6)] (8) and [In(6)Cl(6)(L(3))(6)] (9) were formed in excellent yields. Exchange of the chloride ions of 6 by thiocyanate ions afforded [Fe(6)(SCN)(6)(L(2))(6)] (7). Whereas the structures of 4, 5 and 7 were determined unequivocally by single-crystal X-ray analyses, complexes 8 and 9 were characterised by NMR spectroscopy. Contrary to what is normally presumed, the scaffolds of six-membered metallic wheels are not generally rigid, but rather undergo nondissociative topomerisation processes. This was shown by variable temperature (VT) (1)H NMR spectroscopy for the indium wheel [In(6)Cl(6)(L(1))(6)] (5) and is highlighted for the enantiotopomerisation of one indium centre [ 1/6[S(6)-5]<==>[1/6[S(6)-5']]. The self-assembly of metallic wheels, starting from diethanolamine dendrons, is an efficient strategy for the convergent synthesis of metallodendrimers.     

Does cytotoxicity of metallointercalators correlate with cellular uptake or DNA affinity?

The cytotoxicity of the metallointercalators, [Pt(5,6-dimethyl-1,10-phenanthroline)(trans-1R,2R-diaminocyclohexane)](2+) ([56MERR]) and [Pt(5,6-dimethyl-1,10-phenanthroline)(trans-1S,2S-diaminocyclohexane)](2+) ([56MESS]), towards A549 human lung cancer cells was examined using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay. The IC(50) value obtained following exposure of A549 cells to [56MESS] for 4 h was approximately three times smaller than that obtained when [56MERR] was administered under the same conditions, indicating that the former complex displayed greater cytotoxicity. Both IC(50) values were greater than that obtained after exposure of A549 cells to cisplatin, demonstrating that the latter compound was the most cytotoxic of the three examined. Microprobe synchrotron radiation X-ray fluorescence (SR-XRF) analyses of metallointercalator-treated A549 cells showed that platinum became localised in DNA-rich regions of the nucleus. In contrast, when the same cells were treated with cisplatin the metal became distributed throughout the cell. Determination of the maximum concentration of platinum present inside the cells using graphite furnace atomic absorption spectrophotometry (GFAAS) of platinum-treated cells suggested that there was greater uptake of [56MERR] compared to [56MESS] by the A549 cells, and that platinum uptake did not account for the greater toxicity of [56MESS], as assessed by the MTT assay. Electrospray ionization mass spectrometric (ESI-MS) and circular dichroism (CD) spectroscopic studies of solutions containing either [56MERR] or [56MESS], and a duplex hexadecamer molecule, showed the two metallointercalators displayed very similar affinity towards the nucleic acid. Overall these results indicate that the difference in cytotoxicity of the two platinum metallointercalators is probably the result of variations in their interactions with other cellular components.     

Nuclear magnetic resonance investigation of dynamics in poly(ethylene oxide)-based lithium polyether-ester-sulfonate ionomers

Nuclear magnetic resonance spectroscopy has been utilized to investigate the dynamics of poly(ethylene oxide)-based lithium sulfonate ionomer samples that have low glass transition temperatures. (1)H and (7)Li spin-lattice relaxation times (T(1)) of the bulk polymer and lithium ions, respectively, were measured and analyzed in samples with a range of ion contents. The temperature dependence of T(1) values along with the presence of minima in T(1) as a function of temperature enabled correlation times and activation energies to be obtained for both the segmental motion of the polymer backbone and the hopping motion of lithium cations. Similar activation energies for motion of both the polymer and lithium ions in the samples with lower ion content indicate that the polymer segmental motion and lithium ion hopping motion are correlated in these samples, even though lithium hopping is about ten times slower than the segmental motion. A divergent trend is observed for correlation times and activation energies of the highest ion content sample with 100% lithium sulfonation due to the presence of ionic aggregation. Details of the polymer and cation dynamics on the nanosecond timescale are discussed and complement the findings of X-ray scattering and quasi-elastic neutron scattering experiments.     

A slowly relaxing rigid biradical for efficient dynamic nuclear polarization surface-enhanced NMR spectroscopy: expeditious characterization of functional group manipulation in hybrid materials

A new nitroxide-based biradical having a long electron spin-lattice relaxation time (T(1e)) has been developed as an exogenous polarization source for DNP solid-state NMR experiments. The performance of this new biradical is demonstrated on hybrid silica-based mesostructured materials impregnated with 1,1,2,2-tetrachloroethane radical containing solutions, as well as in frozen bulk solutions, yielding DNP enhancement factors (ε) of over 100 at a magnetic field of 9.4 T and sample temperatures of ~100 K. The effects of radical concentration on the DNP enhancement factors and on the overall sensitivity enhancements (Σ(?)) are reported. The relatively high DNP efficiency of the biradical is attributed to an increased T(1e), which enables more effective saturation of the electron resonance. This new biradical is shown to outperform the polarizing agents used so far in DNP surface-enhanced NMR spectroscopy of materials, yielding a 113-fold increase in overall sensitivity for silicon-29 CPMAS spectra as compared to conventional NMR experiments at room temperature. This results in a reduction in experimental times by a factor >12,700, making the acquisition of (13)C and (15)N one- and two-dimensional NMR spectra at natural isotopic abundance rapid (hours). It has been used here to monitor a series of chemical reactions carried out on the surface functionalities of a hybrid organic-silica material.     

In situ electrochemical X-ray absorption spectroscopy of oxygen reduction electrocatalysis with high oxygen flux

An in situ electrochemical X-ray absorption spectroscopy (XAS) cell has been fabricated that enables high oxygen flux to the working electrode by utilizing a thin poly(dimethylsiloxane) (PDMS) window. This cell design enables in situ XAS investigations of the oxygen reduction reaction (ORR) at high operating current densities greater than 1 mA in an oxygen-purged environment. When the cell was used to study the ORR for a Pt on carbon electrocatalyst, the data revealed a progressive evolution of the electronic structure of the metal clusters that is both potential-dependent and strongly current-dependent. The trends establish a direct correlation to d-state occupancies that directly tracks the character of the Pt-O bonding present.     

Raman, FTIR, photoacoustic-infrared, and inelastic neutron scattering spectra of ternary metal hydride salts A2MH5, (A = Ca, Sr, Eu; M = Ir, Rh) and their deuterides

The vibrational spectra of the ternary metal hydride (deuteride) salts, A(2)MH(5) and A(2)MD(5), where A = calcium, strontium and europium and M = iridium(I) and rhodium(I), have been assigned using Raman, Fourier transform infrared, photoacoustic infrared, and inelastic neutron scattering spectroscopies and density functional theory (DFT) calculations. The wavenumbers of the infrared-active stretching vibrations depend upon the ionization energies of the central metal atom and the cation. The phase transition in calcium pentahydridoiridate(I) was studied as a function of temperature and pressure.     

REACTIONS OF TELLURIUM TETRAHALIDES WITH GLYCOLS

Abstract

Tellurium tetrahalides undergo reaction with glycols to yield three different products: O,O'-dioxotrihalotellurates; bis(alkoxy)dihalotellurium (IV) compounds and hexahalotellurates. The course of the reaction appears to be determined primarily by the nature of the glycol. The structure of dichlorobis(cis- 2-hydroxycyclohexyloxy)tellurium(IV) has been determined crystallographically     

Design, synthesis, and binding affinities of pyrrolinone-based somatostatin mimetics

[structure: see text] Tetrapyrrolinone somatostatin (SRIF) mimetics (cf. 1), based on a heterochiral (D,L-mixed) pyrrolinone scaffold, were designed, synthesized, and evaluated for biological activity. The iterative synthetic sequence, incorporating the requisite functionalized coded and noncoded amino acid side chains, comprised a longest linear synthetic sequence of 23 steps. Binding affinities at two somatostatin receptor subtypes (hsst 4 and 5) reveal micromolar activity, demonstrating that the d,l-mixed pyrrolinone scaffold can be employed to generate functional mimetics of peptide beta-turns.