Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

N,N,N′,N′-Tetrabutyl-3,6-dioxaoctan-dithioamid,Ionophor mit Selektivität für Cd2+

N,N,N′,N′-Tetrabutyl-3,6-dioxaoctane-dithioamide, an Ionophore with Selectivity for Cd²⁺ The dioxa-dithioamide 3 behaves as a highly selective ionophore for Cd²⁺ in solvent polymeric membranes. It induces cation-permselectivity in these membranes with a transference number of 1 for Cd(NO₃)₂- and of 2 for CdCl₂-solutions. In the presence of a proton carrier, 3 may be used to selectively pump Cd²⁺ through membranes by coupling with a pH gradient.     

Photochemistry of N-(2-Cyclohexen-1-ylidene) alkylamines

Irradiation (λ = 254 nm) of N-(4,4,6,6-tetramethyl-2-cyclohexen-1-ylidene)-1,1,3,3-tetramethyl-2-cyclohexen-1-ylidene-1,1,3,3-tetramethylbutylamine (7d) , which in turn is photodecomposed by light of the same wavelength, but at a four times slower rate than it is formed. The rate of formation of photoproduct 7d is a function of the concentration of starting material 1d , suggesting the involvement of a bimolecular ( 1d ^* + 1d ) step. The structure of 7d was established by spectroscopy and by its hydrolysis to 3-cyclohexyl-4,4,6,6-tetramethyl-2-cyclohexenone ( 8 ). The previously made assumption that N-(2-cyclohexen-1-ylidene)cyclohexylamine ( 1a ) and 2,3,4,4a,5,6-hexahydroquinolines 2 photorearrange to N-cyclohexylidenecyclohexanamine 3a and 3,4,4a,5,6,8a-hexahydroquinolines 4 , respectively, via a light-induced 1,3-hydrogen shift proves incorrect.     

Ionization of cyclic aromatic amines by free electron transfer: products are governed by molecule flexibility

The bimolecular electron transfer from secondary aromatic amines to parent radical cations of nonpolar solvents such as alkanes and alkyl chlorides results in the synchronous formation of amine radical cations as well as aminyl radicals, in comparable amounts. If as for cyclic aromatic amines (c-Ar(2)NH) the intramolecular bending motion around the amine group is restricted in varying degrees (acridane, phenothiazine) or completely prevented (carbazole), then this picture is modified. In the free electron transfer, the completely rigid carbazole yields exclusively amine radical cations. Acridane exhibits preferred radical cations, but phenothiazine with the more flexible six-membered ring involving sulfur as a further heteroatom follows the common two-product rule; see above. The phenomenon is reasoned by a peculiarity in the bimolecular free electron transfer where after diffusional approach the actual electron jump proceeds in the ultrashort time range. Therefore, it reflects femtosecond molecular motions which, in the case of free mobility, continuously pass through different molecule conformers, combined with fluctuation of the electrons of the responsible molecular n-orbitals. The rigid systems, however, do not show this effect because of a nonexistent bending motion.     

Molekulares S=GeCl2 Matrix-IR-Untersuchungen und ab initio SCF-Rechnungen

The Molecule S?GeCl₂. Matrix IR Investigation and Ab initio SCF Calculation Molecular S?GeCl₂ is found in a matrix reaction between the high-temperature molecule Ge?S and Cl₂. A structure analog to that of phosgene can be derived from the isotopical shifts (⁷⁰Ge/⁷²Ge/⁷³Ge/⁷⁴Ge/⁷⁶Ge and ³⁵Cl/³⁷Cl) within the IR spectra. The normal coordinate analysis results for the Ge?S force constant a value of 4.21 mdyn/Å. The spectroscopic results are confirmed by ab initio SCF calculations.     

Spatially resolved characterization of PEFCs using simultaneously neutron radiography and locally resolved impedance spectroscopy

A method for performing neutron radiography and locally resolved impedance spectroscopy simultaneously in situ in an operating polymer electrolyte fuel cell (PEFC) is presented. The new method provides concurrently spatially resolved information about the local cell performance, the locally limiting processes, and the liquid water distribution. Information about the impact of water on cell performance and limiting processes can be gained in situ on a local scale in an operating PEFC. The method was applied to a PEFC operated on pure H₂/O₂ in co-flow mode under low humidity operating conditions. The results show that in co-flow mode strong flooding and severe drying can occur at the very same time in different sections of a PEFC.     

Sulfur Compounds. 183. A Derivative of Perthiocarbonic Acid H2CS4: X-ray structural analysis of bis(triphenylmethyl) perthiocarbonate (Ph3C)2CS4

The molecular structure of Ph₃CSSC(S)SCPh₃ · CS₂ has been determined by X-ray structural analysis. The substance crystallizes in the triclinic crystal system [a = 884.9(2) pm, b = 1 039.5(2) pm, c = 2 064.6(3) pm, α = 75.86(1)°, β = 79.83(2)°, γ = 77.31(5)°, Z = 2, space group P1 ]. The CS₃ group is planar; the S? S-bond (201.4 pm) forms an angle of 5.7° with the CS₃ plane. The torsional angle CSSC equals 96.3°. (Ph₃C)₂CS₄ was obtained by reaction of TosNSCl₂ (Tos = p-MeC₆H₄SO₂) with Ph₃CSH in CS₂ in the presence of triethylamine. The reaction mechanism is discussed.     

1,3-Dipolare Addition von 2-Benzonitrilio-2-propanid an 7-Methylthieno[2,3-c]pyridin-1,1-dioxid und Folgereaktionen

1,3-Dipolar Addition of 2-Benzonitrilio-2-propanid to 7-Methylthieno[2,3-c]pyridine 1,1-Dioxide and Subsequent Reactions The addition of dipole 2 , generated photochemically from 2,2-dimethyl-3-phenyl-2H-azirine ( 1 ), to 7-methylthieno[2,3-c]pyridine 1,1-dioxide yields the pyrroline derivative 4 as a major product and regioisomer 5 in low yield. Compound 4 can be transformed into the pyrrolidine derivative 11 by ring opening, loss of SO₂ and hydrogenation. Bromopyrroline derivative 14 gives either by dehydrohalogenation compound 18 or, by substitution, nitrile 17 or ethoxy derivative 19 . Substitution of 14 and ring opening yields methoxypyrrole derivative 20 , which gives access to the unstable hydroxypyrrole and hydroxypyrrolidine derivative 28 resp. 30 . The vinylsulfone 18 is the starting material for addition-ring-cleavage reactions. Oxidation of pyrroline derivative 4 gives epoxy-substituted N-oxide 39 and di-N-oxide 40 ; and oxidative transformation of pyrrolidine derivative 11 yields the (hydroxymethyl)pyridylpyrrolidine derivative 45 .     

Investigation of the pharmacokinetics of celecoxib by liquid chromatography-mass spectrometry

A new method for the quantification of celecoxib in human plasma based on reversed-phase high-performance liquid chromatography (HPLC) coupled to atmospheric pressure chemical ionization (APCI) mass spectrometry (MS) after liquid-liquid extraction is presented. The method is rapid, sensitive and highly selective. The retention time of celecoxib was 2.3 min. The limit of quantification was 5 microg/L. Rofecoxib was used as internal standard. After validation, the method was used to study the pharmacokinetic profile of celecoxib following administration of a single oral dose (200 mg) in 12 healthy volunteers. Since celecoxib should be metabolized primarily by cytochrome 2C9 (CYP2C9), a poor metabolizer (PM) for this cytochrome P450 enzyme was included in the study. Pharmacokinetic characteristics (mean +/- SD) of extensive metabolizers (EM) were t(max) 2.9+/-1.2h, c(max) 842+/-280 microg/L, AUC(infinity) 6246+/-2147 microg h/L and t(1/2) 7.8+/-2.7h. The area under the curve (AUC(infinity)) for the PM was 12561 microg h/L. However, we found no noticeable increase in half life in the PM (11.5 h) after a single dose of celecoxib.     

Computer simulations of enantioselective ester hydrolyses catalyzed by Pseudomonas cepacia lipase

On the basis of the X-ray crystal structure of the lipase from Pseudomonas cepacia (PcL)-an enzyme representative for a whole family of Pseudomonas lipases (lipase PS, SAM-2, AK 10, and others with a high degree of homology with PcL)-a computational study was performed to rationalize both the enantioselectivity and substrate specificity (tolerance) displayed by this lipase in the enantioselective hydrolysis of racemic esters 1a-12a from various secondary aromatic alcohols. The major goal of this project was the development of a binding model for PcL which is able to rationalize the experimental findings to predict "a priori the enantioselective behavior of PcL toward a wider range of substrates. A two-step modeling procedure, namely, docking experiments followed by construction of tetrahedral intermediates, was used for the simulation of the involved enzyme-substrate recognition/hydrolysis processes. The study of the recognition process (docking experiments) led to unambiguous identification of the binding geometry for the two enantiomeric series of substrates, but did not suggest a definitive interpretation of the behavior of PcL. Taking into consideration the stereoelectronic requirements of the enzymatic hydrolysis reaction, both the enantioselectivity and tolerance of the enzyme were then explained through the study of the tetrahedral intermediates, in turn constructed from the calculated docking geometries of 1a-12a.