N-(4-(di-tert-butyl[F]fluorosilyl)benzyl)-2-hydroxy-N,N-dimethylethylammonium bromide ([F]SiFANBr): A novel lead compound for the development of hydrophilic SiFA-based prosthetic groups for F-labeling

¹⁸F-labeled compounds play a major role in the development of new in vivo imaging agents for Positron Emission Tomography (PET), a non invasive imaging modality depicting the biodistribution of radioactive compounds in humans. Recently we reported a new method for the introduction of fluorine-18 into a range of organic molecules exploiting the very fast ¹⁸F-¹⁹F isotope exchange of fluorosilanes (termed SiFA compounds). Here, we wish to report the labeling of the first charged SiFA molecule N-(4-(di-tert-butylfluorosilyl)benzyl)-2-hydroxy-N,N-dimethylethylammonium bromide (SiFAN⁺Br⁻) serving as a lead compound in the development of SiFA-based prosthetic groups of reduced lipophilicity for biomolecule labeling. Mild conditions for synthesis of [¹⁸F]SiFAN⁺Br⁻ and an easy purification procedure using simple C-18 solid phase cartridge have been developed yielding the [¹⁸F]SiFAN⁺Br⁻ in radiochemical yields of 34% (non-decay corrected) within 40 min. A series of kinetic experiments were performed that show high isotopic exchange rate constants. Low activation energy (15.7 kcal/mol) and a large preexponential factor (7.9 × 10¹³ M⁻¹ s⁻¹) were calculated for the isotopic exchange reaction from a corresponding Arrhenius plot. For comparison, the ¹⁸F-fluorination of ethyleneglycol-di-p-tosylate via the formation of a carbon-¹⁸F bond showed a 1.3 kcal/mol higher activation energy and a much lower preexponential factor of 2.9 × 10⁹ M⁻¹ s⁻¹. Moderate hydrophilicity (log D = 0.44), stability in aqueous media at pH up to 7.4 and a high specific activity of [¹⁸F]SiFAN⁺Br⁻ (SA = 20.4 GBq/μmol, 0.55 Ci/μmol) make this charged SiFA compound useful for the development of novel SiFA-based ¹⁸F-labeling synthons.     

Thermodynamically controlled synthesis of a chiral tetra-cavitand nanocapsule and mechanism of enantiomerization

The dynamic covalent synthesis, structure and conformational dynamics of a chiral polyimine nanocapsule 1a are reported. Reaction of four tetraformyl cavitands and eight H(2)N(CH(2))(2)NH(2) yields quantitatively 1a, which has a compact, asymmetrically folded, pseudo-C(2)-symmetric structure, as determined by X-ray crystallography, and encapsulates four CHCl(3) and three CH(3)OH guests in the solid state. In solution, 1a enantiomerizes by passing over a barrier of ΔG(298)(double dagger) = 21.5 ± 0.7 kcal mol(-1) via a refolding process.     

Determination of organophosphorus, triazine and 2,6-dinitroaniline pesticides in aqueous samples via solid-phase microextraction (SPME) and gas chromatography with nitrogen-phosphorus detection

Solid-phase microextraction (SPME) represents a very simple and rapid method for the extraction of organophosphorus, triazine and 2,6-dinitroaniline pesticides from aqueous samples without making use of any solvents. The same fiber can be used repeatedly. Moreover, a sample volume as small as 3 mL can be employed with no loss in sensitivity. 34 compounds have been extracted from aqueous samples by SPME using a 85 m polyacrylate fiber. For organophosphorus pesticides, a 100 m polydimethylsiloxane fiber has been used additionally for comparison. The fibers were directly introduced into the heated split/splitless injector of the gas chromatograph and determined using a nitrogen-phosphorus detector. The method was evaluated with respect to the limit of detection (LOD), linearity and precision. The limit of detection (LOD) depends on the compound and varies from 0.005–0.09 g/L. The method is linear over at least three orders of magnitude with coefficients of correlation usually >0.999. For triazines and 2,6-dinitroanilines the coefficient of variation (precision) is <8% while for organophosphorus compounds it may reach values up to 18% (however, if the latter compounds are extracted using the polydimethylsiloxane phase considerably higher precision is achieved). The partitioning of the analyte between the aqueous phase and the polymeric phase depends on the hydrophobicity of the compound as expressed by the octanol/water partitioning coefficient (P_ow). For triazines it was shown that there is a linear dependence of the logarithm of the analyte response on the log(P_ow) i.e. the higher the hydrophobicity, the higher the affinity of the analytes to the polymeric phase of the fiber and the higher the response. Salt addition has a strong effect on the extraction efficiency. This effect increases with decreasing hydrophobicity (increasing polarity) of the compound. The triazines ametryn, atrazine, propazine, simazine and simetryn have been identified in a ground water well sample by SPMEGC/NPD.     

Mapping the potential energy surface of the tolylcarbene rearrangement in the inner phase of a hemicarcerand

Photolysis of p-tolyldiazirine (6) in the inner phase of a hemicarcerand with four butane-1,4-dioxy linker groups (5) in C(6)D(5)CD(3) at 77 K yields the 5-methylcycloheptatetraene hemicarceplex 5 circle 3b in 41% together with innermolecular reaction products resulting from an insertion of transient p-tolylcarbene (1b) into an acetal C-H or linker C-O bond of 5 and from the addition of 1b to an aryl unit of 5. The yield of incarcerated 3b increased up to 67% if 6 is photolyzed inside a hemicarcerand with deuterated spanners and butane-1,4-dioxy linker groups (d(48)-5). Hemicarceplex 5 circle 3b is not formed if the photolysis is carried out in CDCl(3). Incarcerated 3b is stable at room temperature in the absence of oxygen and is characterized by 1D and 2D NMR spectroscopy. In the presence of oxygen, 3b reacts quantitatively to yield toluene and CO(2). Upon heating solutions of d(48)-5 circle 3b in C(6)D(5)CD(3), 3b rearranges to 1b and m-tolylcarbene (18). Both tolylcarbenes immediately react with the surrounding host. From a product analysis and the measured rate constants for the thermal decomposition of d(48)-5 circle 3b in the temperature range 70-102 degrees C, the activation parameters for the 3b to 1b and 3b to 18 rearrangements are calculated (3b to 1b: DeltaG(373)++ = 27.3 +/- 1.4 kcal/mol, DeltaH(373)++ = 26.4 +/- 1.0 kcal/mol, TDeltaS(373)++ = -0.9 +/- 1.0 kcal/mol; 3b to 18: DeltaG(373)++ = 27.8 +/- 1.4 kcal/mol, DeltaH(373)++ = 19.7 +/- 1.0 kcal/mol, TDeltaS(373)++ = 8.1 +/- 1.0 kcal/mol). These values are compared with those calculated by Geise and Hadad at the B3LYP/6-311+G** level of theory (Geise, C. M.; Hadad, C. M. J. Org. Chem. 2002, 67, 2532-2540). The slightly higher inner phase activation free energy of the 3b to 18 rearrangement is explained through steric constraints imposed by the surrounding hemicarcerand on the transition state. The enthalpy-entropy compensation observed for the 3b to 18 rearrangement is discussed and interpreted as a result of a hemicarcerand and solvent reorganization along the reaction coordinate. It is taken as indirect evidence for the intermediacy of 2-methylbicyclo[4.1.0]hepta-2,4,6-triene in the 3b to 18 rearrangement.     

Diastereoselective Spirocyclization of C-(Alkyloxycarbonyl)formimines of 2-Substituted 1HIndole-3-ethanamines (= Tryptamines): Basic Studies. 5th Communication on Indoles,Indolenines, and Indolines

C-(Alkoxycarbonyl)formimines of type 15–18 were derived from the 2-substituted tryptamines 2 , 9 , 10 , and 11 and transformed with tosyl chloride into tricyclic 3-spiroindoles of types 19–22 (Scheme 3). The influence of the homochiral alkoxy moieties A–D on the stereochemical outcome of this reaction was studied. Good-to-excellent diastereoselectivities were observed with the (?)-8-(phenylmenth-3-yl)oxy group ( B ) as homochiral auxiliary. The structures of the tricycles 4 , (2′R,3S)- 19B , and (2′S,3R) 20C were established by X-ray analysis, the structures of the others by NOE and CD studies, and by chemical correlation. Possibilities to explain the steric course of the spirocyclizations are discussed.     

Kinetic energy release and position of transition state during the intramolecular substitution of ionized 2-benzoyl pyridines

The loss of substituents X from molecular ions of ortho substituted 2-benzoyl pyridines has been investigated as a function of the dissociation energy of the C? X bond. Comparison of unimolecular and collisional induced decompositions of the resulting [M ? X]⁺ ions and reference ions arising from 3-hydroxypyrido[1,2-α]indole shows that cyclic fragment ions are formed in every case by an intramolecular substitution reaction with the exception of the parent compound (X = H), which gives rise to a mixture of [M ? H]⁺ ions with different structures. The heat of formation of the cyclic ion has been estimated experimentally and by calculation using thermochemical data, and from this value and the appearance energies, the activation energies of the reverse reactions have been evaluated for the different reaction systems. Measurement of the kinetic energy release during the substitution reactions shows that only part of the reverse activation energy is released as kinetic energy. The energy partitioning quotient varies from 0.37 to 0.08 depending on the dissociation energy of the C? X bond or the reaction enthalpy. A sudden change in the energy partitioning quotient is observed with increasing exothermicity of the reaction, paralleling the behaviour of similar reaction systems. These results are interpreted as a demonstration of the influence of the variation of transition state position on the energy partitioning quotient.     

Analysis of semiconducting materials by high-resolution radiofrequency glow discharge mass spectrometry

The analytical capabilities of a high-resolution mass spectrometer in combination with a 13.56 MHz glow discharge ion source for the analysis of semiconducting materials (silicon carbide and gallium arsenide) were studied. It was shown that single positively charged ions of sample material have about 10 eV higher average energy than the ions of the discharge and residual gas. Therefore effective energy separation of the ions of analyte from the ions of the discharge and residual gas was achieved by adjusting the ion transfer optics (breadth and position of energy slit), which improves the analytical capabilities of the developed method.Some analytical applications are presented to illustrate the performance of r.f. GDMS for the bulk analysis of semiconducting materials. The results of the trace element analysis of gallium arsenide and silicon carbide samples are compared with data of independent methods (LIMS, ICP-AES, SIMS).Dedicated to Professor Dr. rer. nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthdayOn leave from the Institute of Inorganic Chemistry, 630090 Novosibirsk, Russia     

Measuring nitrate concentration in wastewaters with high chloride content

The presence of chloride ions in wastewaters in concentrations above 50 mg/L poses interference in several methods used for the measurement of nitrate-nitrogen. The aim of this study was to characterise the reliability and costs of some commonly available methods for the analysis of nitrate concentration in landfill leachate which contains high chloride levels. To investigate the effect of chloride interference, several widely used methods [ion chromatography (IC), continuous flow analysis (CFA), the German standard method (DIN), cuvette test (CUV), standard addition method (SAM) and reflectometric test (REF)] were used to measure the nitrate concentration in synthetic solutions containing varying concentrations of chloride and nitrate-nitrogen. Nitrate recoveries of the various methods were found to decrease in the following rank order: CUV (>95%) > IC (>90%) > CFA (89%) > DIN (88%) > REF (70%) > SAM (<80%). In the second part of the study, the same methods were used to measure nitrate concentrations in samples of biologically nitrified landfill leachate with and without chloride elimination. For leachate samples without chloride elimination, CUV results were well correlated (linear regression) with IC results (slope = 1.02/R² = 0.99) but to lesser extents with results obtained by CFA (0.91/0.86), DIN (0.89/0.97) and REF (0.86/0.77), and not correlated with SAM (0.74/–1.3). The incurred measurement costs per sample (in Euros) for the methods were as follows: CFA (<0.1) < DIN (0.6) < REF (0.7) < SAM (3) < CUV (3.8) < IC (15). Cuvette tests are recommended as the method of choice due to their accuracy and lower cost than IC.