Ionization of cyclic aromatic amines by free electron transfer: products are governed by molecule flexibility

The bimolecular electron transfer from secondary aromatic amines to parent radical cations of nonpolar solvents such as alkanes and alkyl chlorides results in the synchronous formation of amine radical cations as well as aminyl radicals, in comparable amounts. If as for cyclic aromatic amines (c-Ar(2)NH) the intramolecular bending motion around the amine group is restricted in varying degrees (acridane, phenothiazine) or completely prevented (carbazole), then this picture is modified. In the free electron transfer, the completely rigid carbazole yields exclusively amine radical cations. Acridane exhibits preferred radical cations, but phenothiazine with the more flexible six-membered ring involving sulfur as a further heteroatom follows the common two-product rule; see above. The phenomenon is reasoned by a peculiarity in the bimolecular free electron transfer where after diffusional approach the actual electron jump proceeds in the ultrashort time range. Therefore, it reflects femtosecond molecular motions which, in the case of free mobility, continuously pass through different molecule conformers, combined with fluctuation of the electrons of the responsible molecular n-orbitals. The rigid systems, however, do not show this effect because of a nonexistent bending motion.     

Molekulares S=GeCl2 Matrix-IR-Untersuchungen und ab initio SCF-Rechnungen

The Molecule S?GeCl₂. Matrix IR Investigation and Ab initio SCF Calculation Molecular S?GeCl₂ is found in a matrix reaction between the high-temperature molecule Ge?S and Cl₂. A structure analog to that of phosgene can be derived from the isotopical shifts (⁷⁰Ge/⁷²Ge/⁷³Ge/⁷⁴Ge/⁷⁶Ge and ³⁵Cl/³⁷Cl) within the IR spectra. The normal coordinate analysis results for the Ge?S force constant a value of 4.21 mdyn/Å. The spectroscopic results are confirmed by ab initio SCF calculations.     

Sulfur Compounds. 183. A Derivative of Perthiocarbonic Acid H2CS4: X-ray structural analysis of bis(triphenylmethyl) perthiocarbonate (Ph3C)2CS4

The molecular structure of Ph₃CSSC(S)SCPh₃ · CS₂ has been determined by X-ray structural analysis. The substance crystallizes in the triclinic crystal system [a = 884.9(2) pm, b = 1 039.5(2) pm, c = 2 064.6(3) pm, α = 75.86(1)°, β = 79.83(2)°, γ = 77.31(5)°, Z = 2, space group P1 ]. The CS₃ group is planar; the S? S-bond (201.4 pm) forms an angle of 5.7° with the CS₃ plane. The torsional angle CSSC equals 96.3°. (Ph₃C)₂CS₄ was obtained by reaction of TosNSCl₂ (Tos = p-MeC₆H₄SO₂) with Ph₃CSH in CS₂ in the presence of triethylamine. The reaction mechanism is discussed.     

Investigation of the pharmacokinetics of celecoxib by liquid chromatography-mass spectrometry

A new method for the quantification of celecoxib in human plasma based on reversed-phase high-performance liquid chromatography (HPLC) coupled to atmospheric pressure chemical ionization (APCI) mass spectrometry (MS) after liquid-liquid extraction is presented. The method is rapid, sensitive and highly selective. The retention time of celecoxib was 2.3 min. The limit of quantification was 5 microg/L. Rofecoxib was used as internal standard. After validation, the method was used to study the pharmacokinetic profile of celecoxib following administration of a single oral dose (200 mg) in 12 healthy volunteers. Since celecoxib should be metabolized primarily by cytochrome 2C9 (CYP2C9), a poor metabolizer (PM) for this cytochrome P450 enzyme was included in the study. Pharmacokinetic characteristics (mean +/- SD) of extensive metabolizers (EM) were t(max) 2.9+/-1.2h, c(max) 842+/-280 microg/L, AUC(infinity) 6246+/-2147 microg h/L and t(1/2) 7.8+/-2.7h. The area under the curve (AUC(infinity)) for the PM was 12561 microg h/L. However, we found no noticeable increase in half life in the PM (11.5 h) after a single dose of celecoxib.     

Sequentially photocleavable protecting groups in solid-phase synthesis

[reaction: see text] A sequential solid-phase peptide synthesis was developed using both photolabile linker and protecting groups. The chromatic sequential lability between a tert-butyl ketone-derived linker (sensitive to irradiation at 305 nm) and a nitroveratryloxycarbonyl (NVOC) group (sensitive at 360 nm) was exploited to prepare Leu-Enkephalin in a 55% overall yield. This new strategy allows the preparation of peptides in essentially neutral medium, by avoiding the use of common deprotection reagents such as trifluoroacetic acid or piperidine.     

New aspects of thermal analysis,Part I. Resolution of DSC and means for its optimization

The definitions of the temperature resolution, the so-called resolution of DSC instruments given in literature are discussed. A new definition of the resolution for DSC instruments is presented and outlined. The main characteristic introduced in this new definition is a minimum between two caloric events as a prerequisite of an existing resolution. Possible candidates of test substances have been evaluated. The oligomer n-hexatriacontane is revealing an interesting phenomenon, namely a lambda transition which is in the peak temperature only 2 K lower than the melting temperature of 76°C. The substance was selected as an ideal test substance for the quantification of the resolution of DSC instruments. The lambda transition is a second order process which may reach under certain conditions the saturation of the occurring molecular dislocation within 0.2 K, and after saturation the heat flow rate drops sharply down. Investigations concerning the main characteristics of n-hexatriacontane in respect to the temperatures of transition (lambda transition and melting), to the involved enthalpies, and to the resolution factors were performed as functions of the sample mass and the heating rate. The importance of relevant evaluation procedures increasing the resolution factors of DSC curves are discussed and these procedures are integrated into the testing of the resolution. The necessity for widening the experimental scope from instruments to evaluation procedures is forced by the existence of instruments with built-in signal treatments based on electronic devices and software procedures. A comparison with literature data is outlined for all of the mentioned characteristic values of n-hexatriacontane. This revised version was published online in August 2006 with corrections to the Cover Date.     

Fermentation of a skim milk concentrate with Streptococcus thermophilus and chymosin: structure, viscoelasticity and syneresis of gels

Fermentation of a reconstituted skim milk concentrate (8% protein) was investigated to elucidate the effects of various fermentation parameters on the structural, rheological and visual (wheying-off) properties of the resulting gels (pH 4.60). Fermentation trials were performed with non-exocellular polysaccharide-producing strains of Streptococcus thermophilus at various fermentation temperatures and at various chymosin levels. Oscillatory vane rheometry carried out on the intact gels (at 4 °C) showed that the level of chymosin had a significant impact on the gel strength (storage modulus G′). This can be explained by the arrangement of casein micelles into more compact aggregates and the enhanced fusion of aggregated casein micelles as revealed by transmission electron microscopy for the gels fermented with chymosin. Wheying-off of the stirred gels as measured by a centrifugation test (at 4 °C) and pore size of the intact gel structures investigated by scanning electron microscopy both increased with increasing level of chymosin and increasing fermentation temperature (resulting in an increase in acidification rate). A higher level of syneresis (wheying-off) is explained by the larger pore size, since larger pores present a lower resistance to the outflow of whey from the gel.     

Determination of organophosphorus, triazine and 2,6-dinitroaniline pesticides in aqueous samples via solid-phase microextraction (SPME) and gas chromatography with nitrogen-phosphorus detection

Solid-phase microextraction (SPME) represents a very simple and rapid method for the extraction of organophosphorus, triazine and 2,6-dinitroaniline pesticides from aqueous samples without making use of any solvents. The same fiber can be used repeatedly. Moreover, a sample volume as small as 3 mL can be employed with no loss in sensitivity. 34 compounds have been extracted from aqueous samples by SPME using a 85 m polyacrylate fiber. For organophosphorus pesticides, a 100 m polydimethylsiloxane fiber has been used additionally for comparison. The fibers were directly introduced into the heated split/splitless injector of the gas chromatograph and determined using a nitrogen-phosphorus detector. The method was evaluated with respect to the limit of detection (LOD), linearity and precision. The limit of detection (LOD) depends on the compound and varies from 0.005–0.09 g/L. The method is linear over at least three orders of magnitude with coefficients of correlation usually >0.999. For triazines and 2,6-dinitroanilines the coefficient of variation (precision) is <8% while for organophosphorus compounds it may reach values up to 18% (however, if the latter compounds are extracted using the polydimethylsiloxane phase considerably higher precision is achieved). The partitioning of the analyte between the aqueous phase and the polymeric phase depends on the hydrophobicity of the compound as expressed by the octanol/water partitioning coefficient (P_ow). For triazines it was shown that there is a linear dependence of the logarithm of the analyte response on the log(P_ow) i.e. the higher the hydrophobicity, the higher the affinity of the analytes to the polymeric phase of the fiber and the higher the response. Salt addition has a strong effect on the extraction efficiency. This effect increases with decreasing hydrophobicity (increasing polarity) of the compound. The triazines ametryn, atrazine, propazine, simazine and simetryn have been identified in a ground water well sample by SPMEGC/NPD.     

Complete solutions of a family of quartic Thue and index form equations

Continuing the recent work of the second author, we prove that the diophantine equation

for has exactly 12 solutions except when , when it has 16 solutions. If denotes one of the zeros of , then for we also find all with .

     

High-temperature TG/DSC/QMS applications in environmental protection

The decomposition reactions of polystyrene, phenolic resin and a protective undercoating material for automobiles which contains PVC were tested using a new type of thermal analysis — mass spectrometry coupling system for measurements to 1500C or 2000C, which is based on the principle of a two-step skimmer orifice system. The results will be presented, with particular emphasis on the detection sensitivity of the new system for the products of decomposition.The capability of this coupling system to detect even heavy metals such as lead and silver in the waste gases from decomposition or after evaporation at high temperatures will also be demonstrated.