Studies of magnetite nanoparticles synthesized by thermal decomposition of iron (III) acetylacetonate in tri(ethylene glycol)

In this paper, water-soluble magnetite nanoparticles have been directly synthesized by thermal decomposition of iron (III) acetylacetonate, Fe(acac)₃ in tri(ethyleneglycol). Size and morphology of the nanoparticles are determined by transmission electron microscopy (TEM) and dynamic light scattering (DLS) measurements while the crystal structure is identified using X-ray diffraction (XRD). Surface charge and surface coating of the nanoparticles are recognized using Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectra (XPS) and zeta potential measurements. Magnetic properties are determined using vibrating sample magnetometer (VSM) and superconducting quantum interference device (SQUID) measurements. The results show that as-prepared magnetite nanoparticles are relatively monodisperse, single crystalline and superparamagnetic in nature with the blocking temperature at around 100 K. The magnetite nanoparticles are found to be highly soluble in water due to steric and electrostatic interactions between the particles arising by the surface adsorbed tri(ethyleneglycol) molecules and associated positive charges, respectively. Cytotoxicity studies on human cervical (SiHa), mouse melanoma (B16F10) and mouse primary fibroblast cells demonstrate that up to a dose of 80 μg/ml, the magnetic nanoparticles are nontoxic to the cells. Specific absorption rate (SAR) value has been calculated to be 885 and 539 W/gm for samples with the iron concentration of 1 and 0.5 mg/ml, respectively. The high SAR value upon exposure to 20 MHz radiofrequency signifies the applicability of as-prepared magnetite nanoparticles for a feasible magnetic hyperthermia treatment.     

Ceric Ammonium Nitrate Catalysed Protection of Alcohols by 3, 4-Dihydro-2H-pyran

Hydroxyl compounds readily add to dihydropyran in presence of a catalytic amount of ceric ammonium nitrate to give high yield of tetrahydropyranyl ethers.     

Asymmetric,Three‐Component,One‐Pot Synthesis of Spiropyrazolones and 2,5‐Chromenediones from Aldol Condensation/NHC‐Catalyzed Annulation Reactions

A novel one‐pot, three‐component diastereo‐ and enantioselective synthesis of spiropyrazolones has been developed involving the aldol condensation of an enal to generate α,β‐unsaturated pyrazolones, which react with a second equivalent of enal through an N‐heterocyclic carbene (NHC)‐catalyzed [3+2] annulation. The desired spirocyclopentane pyrazolones are obtained in moderate to good yields and good to excellent stereoselectivities. Alternatively, starting from cyclic 1,3‐diketones, 2,5‐chromenediones are available through [2+4] annulation.     

Terahertz optical asymmetric demultiplexer based tree-net architecture for all-optical conversion scheme from binary to its other 2n radix based form

To exploit the parallelism of optics in data processing,a suitable number system and an efficient encoding/decoding scheme for handling the data are very essential.In the field of optical computing and parallel information processing,several number systems like binary,quaternary,octal,hexadecimal,etc.have been used for different arithmetic and algebraic operations.Here,we have proposed an all-optical conversion scheme from its binary to its other 2n radix based form with the help of terahertz optical asymmetric demultiplexer (TOAD) based tree-net architecture.     

Introduction to session 3

Applied Biochemistry and Biotechnology -     

Highly diastereoselective indium-mediated allylation of chiral hydrazones

The indium-mediated allylation of chiral hydrazones was investigated. Essentially complete diastereoselectivity and quantitative yields were obtained for substrates derived from both aromatic and aliphatic aldehydes. [reaction--see text]     

Discrimination of components in atherosclerotic plaques from human carotid endarterectomy specimens by magnetic resonance imaging ex vivo

Specific MRI techniques have been used to determine the dimensional and compositional properties of atherosclerotic lesions in carotid endarterectomy tissues. A quantitative comparison of areas of specific features in typical tissue segments was performed using MR images and histologic images. The mean difference for the measurements by the two methods was 4.5% for the total vessel, 5.3% for the internal carotid artery lumen, and 5.0% for the external carotid lumen. For other less abundant components, the mean difference was 14.2%. For direct characterization, individual tissue components were isolated by microdissection and their T1 and T2 relaxation times measured. Highly calcified areas typically had rather short T1 (452-837 ms) and short T2 (10.4-18.4 ms). In contrast, regions enriched in lipid had much longer T1 (1,380-1,480 ms) and longer T2 (35.3-49.0 ms). Other components such as thrombus had intermediate T1 (1,180 ms) and short T2 (15.4 ms). T2 parametric imaging was used as a complementary approach for segmentation and quantitation of tissue components. In fresh tissue, several different components exhibited different T2 ranges: calcified/solid lipid (13-18 ms). cellular/ECM (9-30 ms), fluid lipid (35-40 ms): fibrous (50-60 ms). These results demonstrate the utility of MRI for identifying and quantifying specific components of atherosclerotic plaque ex vivo, and suggest its value for these measurements in vivo as well.     

Magnetization transfer and T2 quantitation in normal appearing cortical gray matter and white matter adjacent to focal abnormality in patients with traumatic brain injury

Traumatic brain injury (TBI) is one of the commonest causes of morbidity and mortality in the developed countries with posttraumatic epilepsy and functional disability being its major sequelae. The purpose of this study was to test the hypothesis whether the normal appearing adjacent gray and white matter regions on T2 and T1 weighted magnetization transfer (MT) weighted images show any abnormality on quantitative imaging in patients with TBI. A total of 51 patients with TBI and 10 normal subjects were included in this study. There were significant differences in T2 and MT ratio values of T2 weighted and T1 weighted MT normal appearing gray matter regions adjacent to focal image abnormality compared to normal gray matter regions in the normal individuals as corresponding contralateral regions of the TBI patient's group (p < 0.05). However the adjoining normal appearing white matter quantitative values did not show any significant change compared to the corresponding contralateral normal white matter values. We conclude that quantitative T2 and MT ratio values provide additional abnormality in patients with TBI that is not discernable on conventional T2 weighted and T1 weighted MT imaging especially in gray matter. This additional information may be of value in overall management of these patients with TBI.     

A study of damping in fiber-reinforced composites

Damping contributions from the viscoelastic matrix, interphase and the dissipation resulting from damage sites are considered to evaluate composite material damping coefficients in various loading modes. The paper presents the results of the FEM/Strain energy investigations carried out to predict anisotropic-damping matrix comprising of loss factors η₁₁, η₂₂, η₁₂ and η₂₃ considering the dissipation of energy due to fiber and matrix (two phase) and correlate the same with various micromechanical theories. Damping in three phase (i.e., fiber-interphase-matrix) composite is also calculated as an attempt to understand the effect of interphase. The contribution of energy dissipation due to sliding at the fiber-matrix interface is incorporated to evaluate its effect on η₁₁, η₂₂, η₁₂ and η₂₃ in fiber-reinforced composite having damage in the form of hairline debonding. Comparative studies of the various micromechanical theories/models with FEM/Strain energy method for the prediction of damping coefficients have shown consistency when both the effect of variable nature of stress and the fiber interaction is considered. Parametric damping studies for three phase composite have shown that the change in properties of fiber, matrix and interphase leads to a change in the magnitude of effectiveness of interphase, but the manner in which the interphase would affect the various loss factors depends predominately upon whether the hard or soft interphase is chosen. Analysis of the effect of damage on composite damping indicates that it is sensitive to its orientation and type of loading.     

A parametric study on fluid-structure interaction problems

This paper deals with finite element analysis of the fluid-structure systems considering the coupled effect of elastic structure and fluid. The equations of motion of the fluid considered inviscid and compressible are expressed in terms of the pressure variable alone. The elastic structure and the fluid domain are treated as two separate systems and discretized with finite elements. The solution of the coupled system is accomplished by solving the two systems separately with the interaction effects at the fluid-solid interface enforced by a developed iterative scheme. Non-divergent pressure and displacement are obtained simultaneously through a few numbers of iterations. Studies show the accuracy of the proposed algorithm, while comparing with the existing ones available in the literature. The parametric study of the coupled system shows the importance of fluid height and material property of the structure.