The versatility of salicylaldehyde thiosemicarbazone in the determination of copper in blood using adsorptive stripping voltammetry

The adsorptive cathodic stripping voltammetry technique (AdCSV) is used to determine copper(II) using salicylaldehyde thiosemicarbazone (N, S- donor) as a complexing agent on hanging mercury drop electrode at pH 9.3. Variable factors affecting the response, i.e. the concentration of ligand, pH, adsorption potential and adsorption time are assessed and optimized. The adsorbed complex of copper(II) and salicylaldehyde thiosemicarbazone gives a well defined cathodic stripping peak current at −0.35 V, which has been used for the determination of copper in the concentration range of 7.85 × 10⁻⁹ to 8.00 × 10⁻⁶ M with accumulation time of 360 s at −0.1 V versus Ag/AgCl. This technique has been applied for the determination of copper in various digested samples of whole blood at trace levels.     

Low‐temperature sol–gel transformation of methyl silicon precursors to silica‐based hybrid materials

Six new methyl silicon (IV) precursors of the type [MeSi{ON?C(R)Ar}₃] [when R = Me, Ar = 2‐C₅H₄N ( 1 ), 2‐C₄H₃O ( 2 ) or 2‐C₄H₃S ( 3 ); and when R = H, Ar = 2‐C₅H₄N ( 4 ), 2‐C₄H₃O ( 5 ) or 2‐C₄H₃S ( 6 )] were prepared and structurally characterized by various spectroscopic techniques. Molecular weight measurements and FAB (Fast Atomic Bombardment) mass spectral studies indicated their monomeric nature. ¹H and ¹³C{¹H} NMR spectral studies suggested the oximate ligands to be monodentate in solution, which was confirmed by ²⁹Si{¹H} NMR signals in the region expected for tetra‐coordinated methylsilicon (IV) derivatives. Thermogravimetric analysis of 1 revealed the complex to be thermally labile, decomposing to a hybrid material of definite composition. Two representative compounds ( 2 and 4 ) were studied as single source molecular precursor for low‐temperature transformation to silica‐based hybrid materials using sol–gel technique. Formation of homogenous methyl‐bonded silica materials (MeSiO_3/2) at low sintering temperature was observed. The thermogravimetric analysis of the methylsilica material indicated that silicon‐methyl bond is thermally stable up to a temperature of 400 °C. Reaction of 2 and Al(OPrⁱ)₃ in equimolar ratio in anhydrous toluene yielded a brown‐colored viscous liquid of the composition [MeSi{ON?C(CH₃)C₄H₃O}₃.Al(OPrⁱ)₃]. Spectroscopic techniques ¹H, ¹³C{¹H}, ²⁷Al{¹H} and ²⁹Si{¹H} NMR spectra of the viscous product indicated the presence of tetracoordination around both silicon and aluminum atoms. On hydrolysis it yielded methylated aluminosilicate material with high specific surface area (464 m²/g). Scanning electron micrography confirmed a regular porous structure with porosity in the nanometric range. Copyright © 2008 John Wiley & Sons, Ltd.     

Influence of structural and morphological factors on the mechanical properties of the polyethylenes

Force-length relations at ambient temperature have been determined for a set of polyethylenes which represent a wide range in molecular weight and molecular constitution. Taking advantage of previous work from this laboratory, samples have been prepared in such a manner that the important independent structural variables can be identified and isolated and their influence on the different aspects of the deformation process assessed. Partial melting-recrystallization processes appear to play an important role. For the linear polymers there is a direct influence of molecular weight. The influence of molecular weight manifests itself in the structure of the interlamellar zone which has a major influence on the initial modulus as well as the ultimate properties. Copolymers and branched copolymers display quite different behavior. The most striking difference is the invariance of the ultimate properties with molecular weight, branching, and level of crystallinity. From the set of experimental results that are presented the molecular factors involved in the deformation process can be sorted out. It becomes quite evident that all of the basic structural regions, characteristic of semicrystalline polymers, contribute to the observations. Focus solely on the changes in the crystallite, in analogy to the deformation of small-molecule crystalline systems, is inadequate in the case of crystalline polymers.     

Tight focusing of linearly and circularly polarized vortex beams; effect of third-order spherical aberration

Tight focusing of linearly and circularly polarized vortex beams is studied in the presence of third-order spherical aberration, using vectorial Debye–Wolf integral. Results for total intensity distribution are presented for both polarizations. In addition, results for x-, y-, and z-polarization components are presented for the circularly polarized beam. Generation of longitudinal optical vortex in the tightly focused left circularly polarized beam has also been demonstrated by plotting its phase distribution. Compensation for the effect of spherical aberration has been studied in the presence of defocusing. Effect of aberration on the dark core of a tightly focused azimuthally polarized beam is also investigated.     

Evaluation of culture media for selective enrichment and isolation of Salmonella in seafood

Seafood, including fish, shrimp, clam, crab, mussel, oyster, lobster, squid, octopus, and cuttlefish samples, was used to compare the recovery of Salmonella serovars by different selective enrichment and isolation media. The samples were selectively enriched in Rappaport-Vassiliadis (RV) broth and tetrathionate broth (TT), followed by selective isolation on Hektoen enteric (HE) agar, xylose lysine desoxycholate (XLD) agar, bismuth sulfite (BS) agar, and Brilliant Green (BG) agar media. Of 443 seafood samples analyzed, 108 were found to be contaminated with Salmonella. The role of selective enrichment in Salmonella spp. recovery with RV medium was distinctly high (70%) compared to TT broth (30%). The selective enrichment in RV broth followed by selective isolation on XLD, HE, BS, and BG agar recovered Salmonella at levels of 56, 41, 28, and 16%, respectively. Similarly, after enrichment in TT broth, XLD and HE agars recovered 27 and 23% respectively. The recovery of Salmonella with enrichment in TT followed by isolation on BS and BG was abysmally low at 4.6 and 5%, respectively. There was no significant difference (P > 0.05) in the recovery of Salmonella using the combinations of XLD and HE media with selective enrichment in RV broth. However, performance difference (P < 0.05) was observed in the recovery when BS and BG with RV, and XLD, HE, BS, and BG agars with TT broth were used. The present study showed that the combination of RV with XLD was the most efficient media for isolation of Salmonella from seafood when compared to other isolation media combinations.     

Chemical-genetic screen identifies riluzole as an enhancer of Wnt/β-catenin signaling in melanoma

To identify new protein and pharmacological regulators of Wnt/β-catenin signaling, we used a cell-based reporter assay to screen a collection of 1857 human-experienced compounds for their ability to enhance activation of the β-catenin reporter by a low concentration of WNT3A. This identified 44 unique compounds, including the FDA-approved drug riluzole, which is presently in clinical trials for treating melanoma. We found that treating melanoma cells with riluzole in?vitro enhances the ability of WNT3A to regulate gene expression, to promote pigmentation, and to decrease cell proliferation. Furthermore riluzole, like WNT3A, decreases metastases in a mouse melanoma model. Interestingly, siRNAs targeting the metabotropic glutamate receptor, GRM1, a reported indirect target of riluzole, enhance β-catenin signaling. The unexpected regulation of β-catenin signaling by both riluzole and GRM1 has implications for the future uses of this drug.     

Investigation of surface plasmon biosensing using gold nanoparticles enhanced ellipsometry

We present a label-free, nondestructive and high sensitivity biosensor by using the phase information of a gold nanoparticles enhanced ellipsometry signal. The refractive index (RI) resolution from ellipsometric phase information is of the order of 1.6×10(-6) RI units. Furthermore, spectroscopic and dynamic measurements show substantial change in the phase signal when biomolecules are coated on gold nanoparticles. The detection limit of our proposed technique is up to ～18?pM concentration of the target biomolecules.     

Principal eigenvector field segmentation for reproducible diffusion tensor tractography of white matter structures

The study was aimed to test the feasibility of utilizing an algorithmically determinable stable fiber mass (SFM) map obtained by an unsupervised principal eigenvector field segmentation (PEVFS) for automatic delineation of 18 white matter (WM) tracts: (1) corpus callosum (CC), (2) tapetum (TP), (3) inferior longitudinal fasciculus (ILF), (4) uncinate fasciculus (UNC), (5) inferior fronto-occipital fasciculus (IFO), (6) optic pathways (OP), (7) superior longitudinal fasciculus (SLF), (8) arcuate fasciculus (AF), (9) fornix (FX), (10) cingulum (CG), (11) anterior thalamic radiation (ATR), (12) superior thalamic radiation (STR), (13) posterior thalamic radiation (PTR), (14) corticospinal/corticopontine tract (CST/CPT), (15) medial lemniscus (ML), (16) superior cerebellar peduncle (SCP), (17) middle cerebellar peduncle (MCP) and (18) inferior cerebellar peduncle (ICP). Diffusion tensor imaging (DTI)-derived fractional anisotropy (FA) and the principal eigenvector field have been used to create the SFM consisting of a collection of linear voxel structures which are grouped together by color-coding them into seven natural classes to provide PEVFS signature segments which greatly facilitate the selection of regions of interest (ROIs) for fiber tractography using just a single mouse click, as compared with a manual drawing of ROIs in the classical approach. All the 18 fiber bundles have been successfully reconstructed, in all the subjects, using the single ROIs provided by the SFM approach, with their reproducibility characterized by the fact that the ROI selection is user independent. The essentially automatic PEVFS method is robust, efficient and compares favorably with the classical ROI methods for diffusion tensor tractography (DTT).