Study of gain flatness for multi-channel amplification in single stage EDFA for WDM applications

In this paper, gain flatness is studied for simultaneous 16-ITU-T channel amplifications at C-band (1,532–1,558 nm) in a single stage EDFA for WDM application at different average inversion levels. The inversion levels are varied due to the change of the input signal levels from the targeted operating point and also for dropping few numbers of channels. Specially designed gain flattening filter (GFF) is used in order to get the flat gain with gain variation ±0.5 dB for −20 dBm/ch input signal power (total input signal power is −8.0 dBm) at a fixed average inversion level which is maintained by proper selection of optimum fibre length and pump power. A specific loss spectrum of GFF is obtained by writing a chirped fibre Bragg grating of length 20 mm. Gain variations are studied by changing the total input signal levels from −8.0 dBm to −20.0 dBm and maintained within 20.0 ± 0.5 dB by using automatic gain control (AGC) circuit. About 15 out of 16 channels are dropped and observed ± 0.5 dB gain-variation which is an important parameter in optical network system.     

Compatibility and Marginality

We present a way of introducing joint distibution function and its marginal distribution functions for non-compatible observables. Each such marginal distribution function has the property of commutativity. Models based on this approach can be used to better explain some classical phenomena in stochastic processes.     

Measurement Accuracy in Phase-Shifting Point Diffraction Interferometer with Two Optical Fibers

A phase-shifting point diffraction interferometer (PS/PDI) with point sources of two single mode optical fibers has been developed, which will be appropriate for the surface figure measurement of large aperture optics on a sub-nanometer scale. To reduce the measurement error factors, a fiber optic plate (FOP) is used as a projection plane for interference pattern. Errors caused by imperfection of optical alignment, such as position of point sources and tilt of FOP, are minimized by analyzing the measured phase data with an original method. Measurement accuracy in the PS/ PDI is estimated with the interference pattern produced by the two optical fiber sources. If inhomogeneity of the FOP and a systematic error of the PS/PDI are eliminated, the measurement accuracy of the present system is estimated to be less than 4nm P-V and 0.7nm rms, respectively, at a measurement wavelength of 632.8 nm.     

Tunable subnanosecond laser pulse generation using an active mirror concept

We report (theory, experimental check) an improved approach for generation of a tunable, subnanosecond pulse (0.1–0.4 ns), based on a single pulsation (“spike”) separation from the transient oscillations in a dye laser with active mirror (AMIR). A pumping by 20–50 ns pulses from Q-switched Nd:YAG laser is considered. The separation is in original, two-spectral selective channels cavity, where the forced by AMIR quenched generation at one of the wavelength stops initially started spiking generation at the other wavelength after the first spike development. The AMIR quickly starts the quenching generation at a precisely controlled moment and with necessary intensity thus assuring the desired separation. An advantage is a high reproducibility of the separation for high (~250%) pump power fluctuations combined with tuning in large range (~20 nm). To obtain such an operation we form ~1 ns leading front pump pulse by electrooptical temporal cutting of the input pump pulse and use an optical delay line. This increases also a few times the power in the separated spike (to be ~100 kW). Our approach widens the combinations of lasers for effective applications of spike separation technique (dye lasers excited by Q-switched solid-state or Cu-vapor lasers).     

Bounds on the Mass for the High Dimensional Gaussian Lattice Field between Two Hard Walls

We consider the d(≥3)-dimensional Gaussian lattice field confined between two hard walls. We show that the field becomes massive and identify the precise asymptotic behavior of the mass and the variance of the field as the height of the wall goes to infinity.     

Dynamic Entanglement and Separability Criteria for Quantum Computing Bit States

A theoretical framework is demonstrated to evaluate the degree of entanglement of bit states in quantum computing. Separability of general superposition of Hilbert space unit vectors is discussed, and criteria in amplitude as well as in phase are derived. By these criteria the possibility of different quantum gates such as controlled not (CN), controlled controlled not (CCN), controlled rotation (CR), and controlled phase shift (CPS), to create the entanglement is examined. Furthermore, the selection of measurement mode external to the quantum system is incorporated in the formula using Kronecker delta (δ _kx ), introducing the concept of dynamic entanglement. With this the process of wavefunction collapse upon measurement is understood as the result of the activation of the dynamic entanglement. A firefly in a box model is used to show a pure state of ontological uncertainty, which is in a dynamically entangled state in Hilbert space.     

The atomic and molecular reaction statics

This work presents a new science called atomic and molecular reaction statics (AMRS). There are four parts for AMRS, i.e. the group theoretical derivation of molecular electronic states, the principle of microscopic reversibility, the principle of microscopic transitivity and the optimum energy process rule. AMRS has been developed for about twenty years.     

Refraction of light in media

The roles of the magnetic field and electric field of the light are investigated when the light is refracted in the medium. The model of the electron cloud conductor is presented. Electron cloud in a molecule is treated as a conductor and the Faraday’s Law is applied to this conductor that is in the alternating magnetic field of the light. dB _M/dt of the light gives rise to an alternating induced current on the electron cloud conductor, and the light exchanges energy, i.e. the refractive energy, with the electron cloud conductor. Formulas of refractive index, which is the ratio of light speed in vacuum to that in the medium, are derived with this model. These formulas are tested with several mediums and Langevin’s diamagnetic susceptibility of helium gas, and the results are in good agreement with the measured data. The anisotropy and the nonlinearity of the refractive index are explained with the theory described in this work. Supported by Beijing Science and Technology New Star Program (Grant No. 952870400), the Beijing Municipal Commission of Education and the Excellent Young Teachers Program of Ministry of Education of China     

Utilization of the BARC critical facility for ADS related experiments

The paper discusses the basic design of the critical facility, whose main purpose is the physics validation of AHWR. Apart from moderator level control, the facility will have shutdown systems based on shutoff rods and multiple ranges of neutron detection systems. In addition, it will have a flux mapping system based on 25 fission chambers, distributed in the core. We are planning to use this reactor for experiments with a suitable source to simulate an ADS system. Any desired sub-criticality can be achieved by adjusting the moderator level. Apart from perfecting our experimental techniques, in simple configurations, we intend to study the one-way coupled core in this facility. Preliminary calculations, employing a Monte Carlo code TRIPOLI, are presented.      

Reply to Comments of Bassi,Ghirardi, and Tumulka on the Free Will Theorem

We respond to criticisms of our paper “The Free Will Theorem”, and produce a new form of the theorem based on weaker assumptions.