Preparation and characterization of hydroxypropyl-β-cyclodextrin inclusion complex of eugenol: differential pulse voltammetry and (1)H-NMR

The objective of present investigation was to improve the solubility of Eugenol by preparing the inclusion complex of Eugenol with hydroxypropyl-β-cyclodextrin (Hp-β-CD) and characterize the prepared complex by using NMR and differential pulse voltammetry (DPV). Phase solubility curve was plotted using Hp-β-CD in ranging from 0-40 mM of Hp-β-CD and found to be linear. Therefore, inclusion complex was prepared in equimolar ratio of Eugenol and Hp-β-CD by lyophilization method. Fourier transform infrared spectroscopy (FT-IR), (1)H-NMR and DPV were performed for Eugenol, Hp-β-CD and prepared inclusion complex of Eugenol. 2D (two dimensional) NMR was also performed for prepared inclusion complex. The proton of phenol moiety of Eugenol experienced a pronounced chemical shift variation in (1)H-NMR. The positive sign of the variation for proton in (1)H-NMR indicated that the proton was located near to an oxygen atom in the Hp-β-CD cavity and its magnitude showed a strong interaction between -OH proton of Eugenol and Hp-β-CD. 2D NMR confirms the interaction between phenolic group and hydrogen atoms of Hp-β-CD. A well defined anodic peak current corresponding to oxidation of Eugenol in non-encapsulated and Hp-β-CD-Eugenol inclusion complex in phosphate buffer (pH 6.8) was obtained at about 0.35 V and 0.40 V, respectively. The positive shift in oxidation potential indicated the formation of complex via hydrophobic interactions. The oxidant power of Eugenol was retained in complex form as indicated by DPV results. Thus, its oxidation dependent pharmacological property such as antimicrobial activity is not affected after complexation with Hp-β-CD. Thus, (1)H-NMR, 2D-NMR and DPV techniques can be used as valuable tools to determine the mechanism of complexation and state of electrochemical active drug in inclusion complex.     

Domino imino-aldol-aza-Michael reaction: one-pot diastereo- and enantioselective synthesis of piperidines

Addition of α-arylmethylidene- or α-alkylidene-β-keto ester enolate to N-activated aldimines via the imino aldol pathway followed by intramolecular aza-Michael reaction in a domino fashion has been developed, and a highly diastereoselective route to substituted piperidines is reported. Enantiopure piperidines are synthesized from chiral sulfinyl imines. Formation and the observed stereoselectivity of the products have been rationalized by mechanistic and computational studies.     

Steric factors override thermodynamic driving force in regioselectivity of proline hydroxylation by prolyl-4-hydroxylase enzymes

Prolyl-4-hydroxylase is an important nonheme iron-containing dioxygenase in humans involved in the regioselective hydroxylation of a proline residue in a peptide chain on the C(4) position. In biosystems this process is important to create collagen cross-linking and cellular responses to hypoxia. We have performed a series of density functional theory (DFT) studies into the origin of the regioselectivity of proline hydroxylation by P4H enzymes using a minimal active site model (where substrate is unhindered in the binding site) and a larger active site model that incorporates steric hindrance of the substrate by several secondary sphere aromatic residues. Our studies show that thermodynamically the most favorable hydrogen atom abstraction position of proline is from the C(5) position; hence, the small model gives a low reaction barrier and large exothermicity for this process. However, stereochemical repulsions of the substrate with aromatic residues of Tyr(140) and Trp(243) in the second coordination sphere prevent C(5) hydroxylation and make C(4) hydroxylation the dominant mechanism, despite a lesser driving force for the reaction. These studies explain the remarkable regioselectivity of proline hydroxylation by P4H enzymes and show that the regioselectivity is kinetically controlled but not thermodynamically. In addition, we calculated spectroscopic parameters and found good agreement with experimental data.     

Evaluation of culture media for selective enrichment and isolation of Salmonella in seafood

Seafood, including fish, shrimp, clam, crab, mussel, oyster, lobster, squid, octopus, and cuttlefish samples, was used to compare the recovery of Salmonella serovars by different selective enrichment and isolation media. The samples were selectively enriched in Rappaport-Vassiliadis (RV) broth and tetrathionate broth (TT), followed by selective isolation on Hektoen enteric (HE) agar, xylose lysine desoxycholate (XLD) agar, bismuth sulfite (BS) agar, and Brilliant Green (BG) agar media. Of 443 seafood samples analyzed, 108 were found to be contaminated with Salmonella. The role of selective enrichment in Salmonella spp. recovery with RV medium was distinctly high (70%) compared to TT broth (30%). The selective enrichment in RV broth followed by selective isolation on XLD, HE, BS, and BG agar recovered Salmonella at levels of 56, 41, 28, and 16%, respectively. Similarly, after enrichment in TT broth, XLD and HE agars recovered 27 and 23% respectively. The recovery of Salmonella with enrichment in TT followed by isolation on BS and BG was abysmally low at 4.6 and 5%, respectively. There was no significant difference (P > 0.05) in the recovery of Salmonella using the combinations of XLD and HE media with selective enrichment in RV broth. However, performance difference (P < 0.05) was observed in the recovery when BS and BG with RV, and XLD, HE, BS, and BG agars with TT broth were used. The present study showed that the combination of RV with XLD was the most efficient media for isolation of Salmonella from seafood when compared to other isolation media combinations.     

Multifunctional ZrO2 nanoparticles and ZrO2-SiO2 nanorods for improved MALDI-MS analysis of cyclodextrins, peptides, and phosphoproteins

Multifunctional ZrO₂ nanoparticles (NPs) and ZrO₂-SiO₂ nanorods (NRs) have been successfully applied as the matrices for cyclodextrins and as affinity probes for enrichment of peptides (leucine-enkephalin, methionine-enkephalin and thiopeptide), phosphopeptides (from tryptic digestion products of β-casein) and phosphoproteins from complex samples (urine and milk) in atmospheric pressure matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) and MALDI time-of-flight (TOF) MS. The results show that the ZrO₂ NPs and ZrO₂-SiO₂ NRs can interact with target molecules (cyclodextrins, peptides, and proteins), and the signal intensities of the analytes were significantly improved in MALDI-MS. The maximum signal intensities of the peptides were obtained at pH 4.5 using ZrO₂ NPs and ZrO₂-SiO₂ NRs as affinity probes. The limits of detection of the peptides were found to be 75-105 fmol for atmospheric pressure MALDI-MS and those of the cyclodextrins and β-casein were found to be 7.5-20 and 115-125 fmol, respectively, for MALDI-TOF-MS. In addition, these nanomaterials can be applied as the matrices for the analysis of cyclodextrins in urine samples by MALDI-TOF-MS. ZrO₂ NPs and ZrO₂-SiO₂ NRs efficiently served as electrostatic probes for peptide mixtures and milk proteins because 2–11 times signal enhancement can be achieved compared with use of conventional organic matrices. Moreover, we have successfully demonstrated that the ZrO₂ NPs can be effectively applied for enrichment of phosphopeptides from tryptic digestion of β-casein. Comparing ZrO₂ NPs with ZrO₂-SiO₂ NRs, we found that ZrO₂ NPs exhibited better affinity towards phosphopeptides than ZrO₂-SiO₂ NRs. Furthermore, the ZrO₂ and ZrO₂-SiO₂ nanomaterials could be used to concentrate trace amounts of peptides/proteins from aqueous solutions without tedious washing procedures. This approach is a simple, straightforward, separation-and washing-free approach for MALDI-MS analysis of cyclodextrins, peptides, proteins, and tryptic digestion products of phosphoproteins.      

Synthesis of tetrahydroisoquinoline-diamine ligands and their application in asymmetric transfer hydrogenation

The use of the tetrahydroisoquinoline scaffold is well documented in biologically active compounds. However, reports of the utilisation of tetrahydroisoquinoline compounds in asymmetric catalysis are limited. The synthesis of novel diamine ligands possessing the tetrahydroisoquinoline (tetrahydroisoquinoline) backbone and evaluation of their activity in the asymmetric transfer hydrogenation of acetophenone are presented. The diamine ligands in conjunction with i-PrOH as the hydrogen source and [RhCl₂(Cp1)]₂ as the metal precursor proved to be the most effective of the tetrahydroisoquinoline derivatives for this catalytic system. Water was found to have a profound influence on the enantioselectivity of the reaction. Optimisation of the amount water, i-PrOH and catalytic loading content rendered the best result of 70% enantioselectivity for the (S)-1-phenylethanol isomer product.     

1,3-Dipolar cycloaddition of nitrile oxides to (R)-1-(1-phenylethyl)-3,5-bis[(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones: synthesis and antimycobacterial evaluation of novel enantiomerically pure di- and trispiroheterocycles

Enantiomerically pure (R)-(1-phenylethyl)-3,5-bis[(E)-arylmethylidene]tetrahydro-4(1H)-pyridinones were synthesized for the first time, and their 1,3-dipolar cycloaddition with nitrile oxides affording di- and trispiroheterocycles regio- and stereoselectively in moderate yields was investigated. These compounds were evaluated against Mycobacterium tuberculosis H37Rv (MTB) and multi-drug-resistant M. tuberculosis (MDR-TB). Among the compounds screened, the dispiroheterocycle, namely, (5R,6R,10S)-3,9-bis(4-chlorophenyl)-10-(2,4-dichlorophenyl)-14-[(E)-(2,4-dichlorophenyl)methylidene]-12-[(R)-1-phenylethyl]-1,4,7-trioxa-2,8,12-tri-azadispiro[4.0.4.4]tetradeca-2,8-diene 5m was found to possess the maximum activity with MIC of 0.49 μM against MTB, being 9.6 and 15.6 times more potent than ciprofloxacin and ethambutol, respectively. Against MDR-TB, 5m displayed maximum activity with an MIC of 0.49 μM, with it thus being more active than rifampicin, isoniazid, ciprofloxacin and ethambutol by 7.8, 23, 77 and 124 times, respectively.     

Synthesis of tetrahydroisoquinoline (TIQ)–oxazoline ligands and their application in enantioselective Henry reactions

A novel family of eleven new tetrahydroisoquinoline (TIQ)–oxazoline intermediates and five corresponding copper(II) catalysts has been developed and applied to the catalytic asymmetric Henry reaction of various aldehydes with nitromethane to provide β-hydroxy nitroalkanes in high conversion (>99%). This paper describes the synthesis of the TIQ compounds from l-dihydroxyphenylalanine (l-DOPA) as the starting material. The chiral ligands were complexed in situ with various transition metals such as Cu, Sc, Co, Zn, Ni and Mn and tested as a chiral catalyst for the Henry reaction. The reaction was optimized in terms of the metal, counter ion, solvent, temperature and over a range of substrates. The corresponding catalyst with copper(II) acetate and 2-propanol as the solvent provides the best enantioselectivities (up to 77% ee) of the corresponding nitroalcohol for 4-chlorobenzaldehyde.     

Synthesis and studies on photochromic properties of vanadium doped TiO2 nanoparticles

Pure and (0.5–3 at%) vanadium doped TiO₂ nanoparticles have been synthesized by wet chemical method. The as synthesized materials have been characterized by using XRD, atomic force microscope (AFM), Raman, EPR and UV–vis spectroscopy techniques. From XRD studies, both pure as well as vanadium doped TiO₂ have been found to show pure anatase phase. The value of lattice constant c is smaller in doped TiO₂ as compared to undoped and has been found to decrease with increase in vanadium concentration. AFM studies show formation of spherical particles with particle size ～23 nm in all the samples. Photochromic behavior of these materials has been studied by making their films in alkyd resin. Vanadium doped TiO₂ films show reversible change in color from beige-yellow to brownish violet on exposure to UV light. The mechanism of coloration and bleaching process has been discussed.