The synthesis and characterization of a new (<Emphasis Type="Italic">E,E</Emphasis>)-dioxime containing 13-membered dithiadiazamacrocyclic moieties and its mononuclear complexes

A new (E,E)-dioxime, (6Z,7Z)-15,16-dihydro-14H-dibenzo[b,h][1,10,4, 7]dithiadiazacyclotride-cine-6,7(5H,8H)-dionedioxime (H ₂ L) has been synthesized by reacting cyanogen-di-N-oxide (2) with 2,2′-[propane-1,3-diylbis(thio)]dianiline (1). Mononuclear complexes (4) and (5) of this ligand have been synthesized by reacting the vic-dioxime (H₂L) with NiCl₂ · 6H₂O and CoCl₂ · 6H₂O, respectively. The BF ₂ ⁺ capped Ni(II) and Co(III) complexes (6) and (7) of the dioxime have been synthesized from (4) and (5). The new compounds were characterized by a combination of elemental analysis, ¹H- and ¹³C-n.m.r, i.r. and m.s. spectral data.     

Polymer dispersions from catalytic polymerization in aqueous systems

By contrast to traditional free radical emulsion polymerization, catalytic polymerization allows for polymer microstructure control. In terms of polymerizable monomers, both techniques are largely complementary. Since the beginning of this decade, an increasing number of reports on polyolefin, polybutadiene, polyalkenamer, polynorbornene, polyketone, and polyacetylene dispersions prepared by catalytic polymerization in disperse aqueous systems has appeared. This contribution reviews the preparation of these dispersions, their colloidal properties, particle formation mechanisms, particle morphologies, and polymer microstructures.     

Thermal behavior of polyacrylonitrile polymers synthesized under different conditions and comonomer compositions

Polyacrylonitrile (PAN) polymers are used as precursors for carbon fiber production. This process requires an oxidative stabilization step, which can be studied by differential scanning calorimetry (DSC). In this sense, thermal behavior of PAN based terpolymers by different polymerization processes, compositions and itaconic acid concentrations in the reaction media were investigated. The obtained results showed that the addition of itaconic acid and methyl acrylate as comonomers resulted a lower heat flow during the process comparing to the PAN homopolymer. It suggested that these comonomers aid the oxidative stabilization stage for all studied process. The redox system polymerization at 40°C resulted in a lower heat flow. Itaconic acid decreases slightly initial and peak temperatures of the terpolymer and heat flow until concentration of 3y. The cyclization temperature decreases when MAis incorporated into the terpolymer compared to the MMA terpolymer and increases when MAA is the acidic monomer. Among terpolymers the AN/MA/AA polymer showed the best thermal behavior for carbon fiber producing.     

Thiotropolone as a chromogenic reagent for the simultaneous determination of cobalt(II) and nickel(II)

Thiotropolone forms chloroform-soluble reddish-brown and violet complexes with cobalt(II) and nickel(II), in the pH range 7.0-8.5 and 6.0-9.0 respectively. Based on this, a sensitive and rapid method for the spectrophotometric determination of traces of cobalt and nickel in metals and alloys has been developed. The two metals can be determined accurately in the range 0.6-2.6 ppm of cobalt and 0.75-4.57 ppm of nickel, simultaneously.     

Nucleophilic substitution in certain bicyclic sesquiterpene alcohols under chemical lonization conditions

Substitution of amino for hydroxyl groups in certain sesquiterpene alcohols has been studied by chemical ionization mass spectrometry using ammonia and ammouia-d₃ as the reagent gases, and by mass-analysed ion kinetic energy spectrometry and collision-induced decomposition mass-analysed ion kinetic energy measurements. Depending upon the source conditions and the nature of the substrates, both S_Ni and S_N1 mechanisms have been found to operate. No evidence is obtained for an S_N2 mechanism in these compounds. In centdarol and isocentdarol, addition of NH₃ to the double bond, followed by elimination of H₂O, also contributes to the substitution process. Attack of [NH₄]⁺ on the epoxide function, followed by loss of H₂O, appears to lead to the substitution ions in epoxycentdarol, epoxyisocentdarol and epoxyhimachalol.     

Assessment of corrosion resistance of surface-coated galvanized steel by analysis of the AC impedance spectra measured on the salt-spray-tested specimen

In the present work, corrosion resistance of surface-coated galvanized steel was quantitatively determined by an analysis of the alternating current (AC) impedance spectra measured on the salt-spray-tested specimen. To evaluate the corrosion resistance of the surface-coated galvanized steel, AC impedance spectroscopy was performed on the salt-spray-tested specimen previously exposed to salt-sprayed corrosive environment. From the analysis of the impedance spectra, the area fraction transient of white rust θ ₂(t) was theoretically derived from the equivalent circuit equation by using two fitting parameters. The values of the two fitting parameters were determined by fitting the empirical transient equations to the area fraction of the resin coating layer and to the total resistance obtained from the impedance spectra measured, respectively. From the analyses of θ ₂(t) for four kinds of surface-coated galvanized steels with various resin coating layers, it is indicated that as the values of the two fitting parameters decrease in the order of CP, GI, OD and OM (commercial trade names) specimens, the corrosion resistance increases in that order as well. Furthermore, from the quantitative comparison of the two fitting parameters with the polarization resistance of the upper resin coating layer R _p determined from the potentiodynamic polarization curve, it is suggested that the two fitting parameters decrease in value as well with increasing R _p.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.     

Halogen oxidation and nitrosylation of some aldimine and ketimine carbonyl complexes of chromium and molybdenum

Summary The halogen oxidation and nitrosylation of cis-[(SB)M-(CO)₄] [M = Cr or Mo, SB = N,N-ethylenebis(p-tolualideneimine), N,N-ethylenebis(p-N,N-dimethylaminobenzalideneimine) or N,N-ethylenebis(methyl-p-methoxyphenylketimine); M = Mo, SB = N,N-ethylenebis-(cinnamylideneimine) or N,N-ethylenebis(methyl-p-methylphenylketimine)] have been studied. Halogenation of [(SB)Cr(CO)₄] yielded [(SB)CrX₂] (X = Cl, Br or I) where-as [(SB)Mo(CO)₄] gave [(SB)Mo(CO)₃X₂] (X = Br or I) and [(SB)MoX _x ] (X = I, n = 2; X = Cl or Br, n = 4). NOCl produced [(SB)Cr(NO)₂Cl₂] and [(SB)Mo(CO)₂(NO)Cl] when reacted with the corresponding [(SB)M(CO)₄]. The complexes were characterized by physico-chemical and spectroscopic measurements.     

A convenient stereoselective synthesis of (R)-(−)-denopamine and (R)-(−)-salmeterol

β-Adrenoreceptor agonists (R)-(−)-denopamine (R)-1 and (R)-(−)-salmeterol (R)-2 have been prepared in good overall yield and high enantioselectivity through a biotransformative pathway.     

Standard molar enthalpy of formation of CH<Subscript>3</Subscript>(CH<Subscript>3</Subscript>SCH<Subscript>2</Subscript>)SO,methyl methylthiomethyl sulfoxide

Summary The standard molar enthalpy of formation of methyl methylthiomethyl sulfoxide, CH₃(CH₃SCH₂)SO, at T=298.15 K in the liquid state was determined to be -199.4±1.5 kJ mol^-1 by means of oxygen rotating-bomb combustion calorimetry.