排序方式: 共有45条查询结果,搜索用时 15 毫秒
1.
Umar Asghar Mehvish Iram Zile Huma Rubina Nelofer Muhammad Nadeem 《Natural product research》2015,29(2):125-131
This study was conducted to analyse structural changes through scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) after alkaline pretreatment of wheat straw for optimum steaming period. During the study, 2 mm size of substrate was soaked in 2.5% NaOH for 1 h at room temperature and then autoclaved at 121°C for various steaming time (30, 60, 90 and 120 min). Results revealed that residence time of 90 min at 121°C has strong effect on substrate, achieving a maximum cellulose content of 83%, delignification of 81% and hemicellulose content of 10.5%. Further SEM and FTIR spectroscopy confirmed structural modification caused by alkaline pretreatment in substrate. Maximum saccharification yield of 52.93% was achieved with 0.5% enzyme concentration using 2.5% substrate concentration for 8 h of incubation at 50°C. This result indicates that the above-mentioned pretreatment conditions create accessible areas for enzymatic hydrolysis. 相似文献
2.
Caragisides A–C ( 1 – 3 , resp.), three new isoflavone glucosides, were isolated from the BuOH sub‐fraction of the EtOH extract of the whole plant of Caragana conferta, along with ononoside ( 4 ), reported for the first time from this species. The structures of the new compounds were elucidated by spectroscopic techniques including MS and 2D‐NMR spectroscopy. Compounds 1 – 3 showed significant inhibition of platelet aggregation. 相似文献
3.
Effects of porous medium have been investigated on the steady flow of a third grade fluid between two stationary porous plates. The continuity and momentum equations along with modified Darcy??s law are used for the development of mathematical problem. The governing nonlinear problem is solved by a homotopy analysis method. The dimensionless velocity and shear stresses at the plates are analyzed. 相似文献
4.
Murtaza Hasan Ihsan Ullah Hina Zulfiqar Komal Naeem Arfa Iqbal Huma Gul Muhammad Ashfaq Nasir Mahmood 《Materials Today Chemistry》2018
Synthesis of nanomaterials is being gained extensive attention in the fields of chemistry, applied physics, catalysis, drug delivery and the most important in diagnosis and therapeutic applications. Recently, many reports have been published on physical and chemical synthesis of magnetic as well as metallic nanoparticles (NPs) with viable surface functionalization, but still there is a dire need of such strategies that can combine synthetic methodology with stable surface modification found in nature. Synthesis of NPs via biological methods is the possible way to solve these barriers. However, systematized summary and outlooks of NPs synthesis via biological entities with various influencing factors e.g. temperature, pH, concentration of reactants and reaction time has rarely been reported. This review will present the distinct advantages of biological synthesis of NPs over physical and chemical methods. It will also highlight the recent progress on synthesis of NPs via various biological systems i.e. plant, fungus, bacteria, and yeast. Furthermore, it will explain various factors that control the size, shape, and morphology of these NPs. Finally, it would present the future perspectives of green chemistry for the development of nano-science and -biotechnology. 相似文献
5.
Basic Ionic Liquid Promoted Domino Knoevenagel–Thia‐Michael Reaction: An Efficient and Multicomponent Strategy for Synthesis of 1,3‐Thiazines
下载免费PDF全文
![点击此处可从《Journal of heterocyclic chemistry》网站下载免费的PDF全文](/ch/ext_images/free.gif)
I. R. Siddiqui Rahila Shayna Shamim Pragati Rai Shireen Malik A. Waseem Arjita Srivastava Anjali Srivastava 《Journal of heterocyclic chemistry》2016,53(4):1284-1291
An efficient, three‐component strategy for synthesis of 1,3‐thiazines with high atom economy in one‐pot mediated by room temperature basic ionic liquid is described here. The strategy involves basic ionic liquid, [bmim]OH‐catalyzed Knoevenagel condensation between ethyl cyanoacetate and aromatic aldehyde and subsequent thia‐Michael addition with substituted thioureas. The reaction sequence is smooth and quantitative under ambient temperature. [bmim]OH was recovered and reused four times without any appreciable decrease in its reactivity and product yield. 相似文献
6.
7.
DeGraw AJ Zhao Z Strickland CL Taban AH Hsieh J Jefferies M Xie W Shintani DK McMahan CM Cornish K Distefano MD 《The Journal of organic chemistry》2007,72(13):4587-4595
A number of biochemical processes rely on isoprenoids, including the post-translational modification of signaling proteins and the biosynthesis of a wide array of compounds. Photoactivatable analogues have been developed to study isoprenoid utilizing enzymes such as the isoprenoid synthases and prenyltransferases. While these initial analogues proved to be excellent structural analogues with good cross-linking capability, they lack the stability needed when the goals include isolation of cross-linked species, tryptic digestion, and subsequent peptide sequencing. Here, the synthesis of a benzophenone-based farnesyl diphosphate analogue containing a stable phosphonophosphate group is described. Inhibition kinetics, photolabeling experiments, as well as X-ray crystallographic analysis with a protein prenyltransferase are described, verifying this compound as a good isoprenoid mimetic. In addition, the utility of this new analogue was explored by using it to photoaffinity label crude protein extracts obtained from Hevea brasiliensis latex. Those experiments suggest that a small protein, rubber elongation factor, interacts directly with farnesyl diphosphate during rubber biosynthesis. These results indicate that this benzophenone-based isoprenoid analogue will be useful for identifying enzymes that utilize farnesyl diphosphate as a substrate. 相似文献
8.
Huma Rao Saeed Ahmad Asadullah Madni Iqra Rao Mohammed Ghazwani Umme Hani Muhammad Umair Imtiaz Ahmad Nadia Rai Maqsood Ahmed Kashif ur Rehman Khan 《Molecules (Basel, Switzerland)》2022,27(24)
The current study was designed to investigate the feasibility of incorporating the water-insoluble lipophilic drug Alprazolam (Alp) into solid lipid nanoparticles (SLNs) to offer the combined benefits of the quick onset of action along with the sustained release of the drug. Therefore, compritol-based alprazolam-loaded SLNs (Alp-SLNs) would provide early relief from anxiety and sleep disturbances and long-lasting control of symptoms in patients with depression, thereby enhancing patient compliance. The optimized Alp-SLNs analyzed by DLS and SEM showed consistent particle size of 92.9 nm with PI values and standard deviation of the measurements calculated at <0.3 and negative surface charge. These characteristic values demonstrate the desired level of homogeneity and good physical stability of Alp-SLNs. The SLNs had a good entrapment efficiency (89.4%) and high drug-loading capacity (77.9%). SEM analysis revealed the smooth spherical morphology of the SLNs. The physical condition of alprazolam and absence of interaction among formulation components in Alp-SLNs was confirmed by FTIR and DSC analyses. XRD analysis demonstrated the molecular dispersion of crystalline alprazolam in Alp-SLNs. The in vitro release study implied that the release of Alp from the optimized Alp-SLN formulation was sustained as compared to the Alp drug solution because Alp-SLNs exhibited sustained release of alprazolam over 24 h. Alp-SLNs are a promising candidate to achieve sustained release of the short-acting drug Alp, thereby reducing its dosing frequency and enhancing patient compliance. 相似文献
9.
Investigations of the pyrolysis of poly(vinyl chloride) (PVC) in the presence of copper metal (Cu), copper(II) oxide (CuO) and copper(II) chloride (CuCl2) are of potential importance because of the likelihood of the formation of these copper compounds during the thermal degradation of PVC-coated copper wires, a step in the recovery of copper from waste. The presence of Cu, CuO and CuCl2 (i) retards the thermal degradation of PVC in air and in nitrogen and (ii) decreases the percentages of volatile products produced at both stages of the decomposition. These effects are greatest for PVC-CuO. The presence of copper, CuO or CuCl2 in PVC has a major effect on the nature of the gaseous emissions of the thermal decomposition in air and in nitrogen. The concentrations of total chlorine, aliphatic hydrocarbons, aromatic hydrocarbons, chlorinated hydrocarbons and soot particulates are all affected relative to an equivalent amount of PVC. These changes are greatest for the PVC-CuO system for which total chlorine emissions in air and nitrogen are reduced by 40% in air and 20% in nitrogen, benzene emissions are reduced by greater than 90% in air and nitrogen, other aromatic and chloroaromatic emissions are reduced, and soot particulate emissions are reduced by more than 50% as the concentrations of aliphatic compounds are increased. These changes are consistent with the presence of copper or its compounds permitting more efficient combustion of the carbon content of the PVC and particularly in the case of PVC-CuO with the removal of chlorine during pyrolysis in the inorganic phase. 相似文献
10.
Shahnila SHAH Huma SHAKH Najma MEMON Muhammad Iqbal BHANGER Tahira QURESH Humaira KHAN Adil DENZL 《Turkish Journal of Chemistry》2020,44(4):901
Human body is greatly exposed to aluminum due to its high abundance in the environment. This nonessential metal is a threat to the patients of chronic renal disorders, as it is easily retained in their plasma and quickly accumulates in different tissues. Thus, there is great need to remove it from the aqueous environment. In this study, Al3+ imprinted semiinterpenetrating polymer network (semi-IPN)-based cryogel composite was prepared and applied for the purification of environmental and drinking water samples from aluminum. Poly (2-hydroxyethyl methacrylate) (pHEMA) discs were produced via cryogenic treatment and imprinted semi-IPN was introduced to the 3-(trimethoxysilyl) propyl acrylatemodified macroporous cryogel discs. The adsorption properties and selectivity of the aluminum (III) imprinted semi-IPN cryogel composite were studied in detail. The imprinted semi-IPN cryogel composite showed good selectivity towards aluminum (III) ions with the imprinting factor (IF) of 76.4 in the presence of competing copper (II), nickle (II), and iron (III) ions. The maximum adsorption capacity of 271 μmol g-1 was obtained for aluminum (III) at pH 7.0 within 10 min using imprinted semi-IPN cryogel composite. The good selectivity and reusability of aluminum (III)-imprinted semi-IPN cryogel composite makes this material an eligible candidate for the purification of drinking water from aluminum (III) leaving important minerals remained in the water. 相似文献