Characterization of chemical heterogeneity in polymer systems using hydrolysis and tapping‐mode atomic force microscopy

Characterization of polymer coatings microstructure is critical to the fundamental understanding of the corrosion of coated metals. An approach for mapping the chemical heterogeneity of a polymer system using chemical modification and tapping‐mode atomic force microscopy (TMAFM) is demonstrated. This approach is based on the selective degradation of one of the phases in a multiphase polymer blend system and the ability of TMAFM to provide nanoscale lateral information about the different phases in the polymer system. Films made of a 70:30 polyethyl acrylate/polystyrene (PEA/PS) blend were exposed to a hydrolytic acidic environment and analyzed using TMAFM. Pits were observed to form in the PEA/PS blend films, and this degradation behavior was similar to that of the PEA material. Using these results, the domains in the 70:30 blend were identified as the PS‐rich regions and the matrix as the PEA‐rich region. This conclusion was confirmed by Fourier transform infrared‐attenuated total reflection analyses that revealed the hydrolysis of the PEA material. TMAFM phase imaging was also used to follow pit growth of the blend as a function of exposure time. The usefulness of the chemical modification/AFM imaging approach in understanding the degradation process of a coating film is discussed. © 2001 John Wiley & Sons, Inc. J Polym Sci B Part B: Polym Phys 39: 1460–1470, 2001     

Bose-Einstein correlations for pions produced inp p collisions at 360 GeV/c

Zeitschrift für Physik C Particles and Fields - Correlations among identically charged pions were measured for pions produced inp p collisions at 360 GeV/c using the EHS spectrometer. The...     

Inclusive ∑±(1385) production inK − p interactions at 110 GeV/c

Results are presented on inclusive production of ∑⁺(1385) and ∑^?(1385) inK ^? p interactions at 110 GeV/c. The inclusive and topological cross sections have been estimated and compared with published results at lower energies. The inclusive cross section of ∑⁺(1385) seems to decrease with c.m. energy, while that of the ∑^?(1385) is nearly constant. The mean charged multiplicity associate to Σ(1385) increases with c.m. energy. The ∑⁺(1385) is produced both in the target fragmentation region and in the central region where ∑^?(1385) is predominantly produced in the central region. Approximately 16% of the Λ's stem from the decay of ∑^±(1385) and the kinematic distributions of these Λ's are not very different from the inclusive Λ's.     

Application of PET deprotection for orthogonal photocontrol of aqueous solution viscosity

Photorelease and photoisomerization of trans-cinnamic acid in aqueous CTAB solutions induces a bulk solution viscosity increase and decrease, respectively, triggered by orthogonal irradiation wavelengths.     

Antiferromagnetic interactions in Er-doped SnO<Subscript>2</Subscript> DMS nanoparticles

Diluted magnetic semiconductor (DMS) nanoparticles of Sn_1−x Er _x O₂ (x = 0.0, 0.02, 0.04, and 0.1) were prepared by sol–gel method. The X-ray diffraction patterns showed SnO₂ rutile structure for all samples with no impurity peaks. The decrease in crystallite size with Er concentration was confirmed from TEM measurements (from 12 to 4 nm). The UV–Visible absorption spectra of Er-doped SnO₂ nanoparticles showed blue shift in band gap compared to undoped SnO₂. The electron spin resonance analysis of Er-doped SnO₂ nanoparticles indicate Er³⁺ in a rutile lattice and also decrease in intensity with Er concentration above x = 0.02. Temperature-dependent magnetization studies and the inverse susceptibility curves indicated increased antiferromagnetic interaction with Er concentration.     

The effect of mixing methods on the dispersion of carbon nanotubes during the solvent-free processing of multiwalled carbon nanotube/epoxy composites

Several solvent-free processing methods to disperse multiwalled carbon nanotubes (MWCNTs) in bisphenol F-based epoxy resin were investigated, including the use of a microfluidizer (MF), planetary shear mixer (PSM), ultrasonication (US) and combinations. The processed mixture was cured with diethyl toluene diamine. Three complimentary techniques were used to characterize the dispersion of the MWCNTs in cured composite samples: optical microscopy, micro Raman spectroscopy, and scanning electron microscopy (SEM). For sample MF + PSM, optical micrographs and Raman images showed reduced agglomeration and a homogeneous distribution of MWCNTs in the epoxy matrix. SEM analysis of fractured specimen after tensile testing revealed breakage of nanotubes along the fracture surface of the composite. A comparison of the MWCNT dispersion in the epoxy samples processed using different methods showed that a combination of MF and PSM processing yields a more homogeneous sample than the PSM or US + PSM processed samples. Mechanical testing of the composites showed about 15% improvement in the tensile strength of samples processed by the MF + PSM method over other methods. Thermogravimetric analysis (TGA) results showed a small decrease in the onset degradation temperature for poorly dispersed samples produced by PSM compared with the well-mixed samples (MF + PSM). These results strongly suggest that the MF + PSM processing method yield better-dispersed and stronger MWCNT/epoxy composites. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Randomized broadcast in networks

In this paper we study the rate at which a rumor spreads through an undirected graph. This study has two important applications in distributed computation: in simple, robust and efficient broadcast protocols, and in the maintenance of replicated databases.     

Prediction of clay soil compaction

Field measurements were made of soil density and moisture patterns under different vehicle tire paths with varying external pressures and number of passes. In addition, laboratory index tests were performed to determine the compaction behaviour of the same soil. Using these results, a prediction equation of dry density in terms of applied pressure and moisture content was obtained for the clay soil. A previously developed equation for sandy soil was modified for the complete range of moisture contents encountered. Estimation of shear strength for the clay soil was made using plastic and liquid limits.     

Vehicular traffic effects on development and yield of corn (maize)

A 52 plot experiment was performed during the growing season of 1977 in a Ste. Rosalie clay soil, using a randomized complete-block design with 13 treatments of machinery traffic within each of four blocks. Three vehicle contact pressures, four numbers of tractor passes, and a control of zero traffic were used to relate the growth and yield variables to wheel traffic and the resulting soil compaction. The number of days required for (a) plant emergence, (b) tasselling, and (c) silking were minimum in moderately compacted plots. The plant growth rate monitored at 41, 54, 68, and 105 days from the seeding time was different from plot to plot. Growth models at different times of the season were derived in terms of the wheel traffic variables, and plant and ear moisture content variation with traffic treatment was investigated. Yield and ear yield increased with increases in machine contact pressure and passes reaching a peak around 500 kPa and dropped off for further increases. The reduction in yield was over 35% in some cases, suggesting that careful traffic planning is essential to obtain better production in agricultural fields. Prediction models were obtained for all the plant growth characteristics in terms of traffic variables. A relation for yield in terms of soil bulk density was established for a dry season.