Optical loss measurements in femtosecond laser written waveguides in glass

The optical loss is an important parameter for waveguides used in integrated optics. We measured the optical loss in waveguides written in silicate glass slides with high repetition-rate (MHz) femtosecond laser pulses. The average transmission loss of straight waveguides is about 0.3 dB/mm at a wavelength of 633 nm and 0.05 dB/mm at a wavelength of 1.55 μm. The loss is not polarization dependent and the waveguides allow a minimum bending radius of 36 mm without additional loss. The average numerical aperture of the waveguides is 0.065 at a wavelength of 633 nm and 0.045 at a wavelength of 1.55 μm. In straight waveguides more than 90% of the transmission loss is due to scattering.     

Controlled hydrothermal growth of ZnO nanostructures by sequestering the Zn metal ions with the chelating agent EDTA

In the present work, a controlled growth of ZnO nanostructures by manipulating Zn metal ion concentration by the chelating action of ethylene diaminetetra acetic acid in hydrothermal method is studied. EDTA produces metal–chelate complex by the formation of bidentate ligand with Zn²⁺ in the solution and diminishes the reactivity of Zn metal cations. Concentration of EDTA in the mother solution was varied in different ranges like 3, 5 and 10 mM while retaining the zinc metal salt and the NaOH concentration the same. Three different morphologies of wurtzite structured ZnO nanostructures such as nanorods-bunch, separate/discrete uniformly sized hexagonal nanorods and tapered flower petals like shapes are achieved by 3, 5 and 10 mM strengths of EDTA, respectively. The medium concentration 5 mM of EDTA is found to have moderate control over producing ZnO nanostructures of uniform diameter and a high aspect (length to diameter) ratio. An array of vertically aligned free standing ZnO nanorods with uniform spacing is successfully achieved by the addition of 5 mM of EDTA in the mother solution and the same is studied for its fluorescence property at an excitation of 325 nm and it has exhibited a characteristic UV emission of ZnO around 383 nm.     

Warm-intermediate inflationary universe model in braneworld cosmologies

Warm-intermediate inflationary universe models in the context of braneworld cosmologies are studied. This study is done in the weak and strong dissipative regimes. We find that the scalar potentials and dissipation coefficients in terms of the scalar field evolve as type-power-law and powers of logarithms, respectively. General conditions required for these models to be realizable are derived and discussed. We also study the scalar and tensor perturbations for each regime. We use recent astronomical observations to constrain the parameters appearing in the braneworld models.     

Comparative characterization of thermal isomerization rates of 6‐phenyl‐1,5‐diazabicyclo[3.1.0]hexane at convection and microwave heating

Rate constants of thermal isomerization of 6‐phenyl‐1,5‐diazabicyclo[3.1.0]hexane into 1‐(benzyl)‐4,5‐dihydro‐1H‐pyrazole at convection and microwave heating in toluene and chlorobenzene (solvents) were determined within the temperature range 90°C to 120°С. These data were used for the calculation of activation parameters of isomerization. It is shown that microwave heating increases the rate constants at the same temperature by a factor of 2 to 2.5 as compared with those using convection heating. The reason is that the effective temperature of microwave heating exceeds that of convection heating by 6°C to 9°С in toluene and by 12°C to 20°С in chlorobenzene as solvent.     

A general relation between kink-exchange and kink-rotation

The normal correlation between spin and statistics is shown to be valid for arbitrary kinks, among them theSU(n) Skyrmions forn3. It is assumed in the proof that no gauge-ambiguity attaches to the values of the underlying scalar field, and that conversely each configuration of this field is represented quantum mechanically by a Hilbert subspace of dimension precisely one.Supported in part by NSF Grant No. PHY 83-18350     

Complex contact manifolds and S1 actions

We prove rigidity and vanishing theorems for several holomorphic Euler characteristics on complex contact manifolds admitting holomorphic circle actions preserving the contact structure. Such vanishings are reminiscent of those of LeBrun and Salamon on Fano contact manifolds but under a symmetry assumption instead of a curvature condition.     

Dielectric and modulus behavior of LiFe1/2Ni1/2VO4 ceramics

The polycrystalline sample of LiFe_1/2Ni_1/2VO₄ was prepared by a standard solid-state reaction technique and confirmed by X-ray diffractometry. LiFe_1/2Ni_1/2VO₄ has orthorhombic crystal structure whose dielectric and electric modulus properties were studied over a wide frequency range (100 Hz–1 MHz) at different temperatures (296–623 K) using a complex impedance spectroscopy (CIS) technique. The frequency and temperature dependence of dielectric constant (ε_r) and tangent loss (tan δ) of LiFe_1/2Ni_1/2VO₄ are studied. The variation of ε_r as a function frequency at different temperatures exhibits a dispersive behavior at low frequencies. The variation of the ε_r as a function of temperature at different frequencies shows the dielectric anomaly in ε_r at 498 K with maximum value of dielectric constant 274.49 and 96.86 at 100 kHz and 1 MHz, respectively. Modulus analysis was carried out to understand the mechanism of the electrical transport process, which indicates the non-exponential type of conductivity relaxation in the material. The activation energy calculated from electric modulus spectra is 0.38 eV.     

Remote characterization of defects in plates with viscoelastic coatings using guided waves

The remote inspection for defects in large metallic elements such as pipes, tubes and plates is a field where guided waves are being applied with success. There are a number of situations where a surface coating is added for corrosion protection or insulation purposes. Since the coating materials are usually viscoelastic, the guided wave inspection range may be severely reduced unless a proper mode and an adequate frequency range is selected. Previous authors found the existence of low-attenuated modes at certain frequency ranges, which were used to detect and locate defects at reasonably large distances. This paper studies the potential of guided waves for not only locating but also sizing defects in plates with viscoelastic coatings. A hybrid finite element-boundary element method which explicitly includes the attenuating characteristics of the coating is used to determine Lamb and SH mode conversion factors at corrosion defects under the coating. Through parametric studies and analysis of the numerical results, some trends and features are highlighted that could be used for sizing purposes.