A review of bioanalytical methods for chronic lymphocytic leukemia drugs and metabolites in biological matrices

Quantitation of drugs used for the treatment of chronic lymphocytic leukemia in various biological matrices during both pre-clinical and clinical developments is very important, often in routine therapeutic drug monitoring. The first developed methods for quantitation were traditionally done on LC in combination with either UV or fluorescence detection. However, the emergence of LC with mass spectrometry in tandem in early 1990s has revolutionized the quantitation as it has provided better sensitivity and selectivity within a shorter run time; therefore it has become the choice of method for the analysis of various drugs. In this article, an overview of various bioanalytical methods (HPLC or LC–MS/MS) for the quantification of drugs for the treatment of chronic lymphocytic leukemia, along with applicability of these methods, is given.     

Simultaneous determination of colchicine and febuxostat in rat plasma: Application in a rat pharmacokinetic study

A selective, sensitive and rapid LC–MS/MS method has been developed and validated as per US Food and Drug Administration regulatory guidelines for the simultaneous quantitation of colchicine and febuxostat in rat plasma. Colchicine and febuxostat were extracted from the rat plasma using 10% tert-butyl methyl ether in ethyl acetate using colchicine-d₆ as an internal standard (IS). The chromatographic separation of colchicine, febuxostat and the IS was achieved using a mobile phase comprising 5 mm ammonium formate and 0.025% formic acid in acetonitrile (20:80, v/v) in isocratic mode on an Eclipse XDB-C₁₈ column. The injection volume and flow rate were 5.0 μl and 0.9 ml/min, respectively. Colchicine and febuxostat were detected by positive electrospray ionization in multiple reaction monitoring mode using transition pairs (Q1 → Q3) of m/z 400.10 → 358.10 and 317.05 → 261.00, respectively. The assay was linear in the ranges of 0.25–254 and 2.60–622 ng/ml for colchicine and febuxostat, respectively. The inter- and intra-day precision values were 0.58–13.0 and 1.03–4.88% for colchicine and febuxostat, respectively. No matrix or carryover effects were observed during the validation. Both analytes were stable on the bench-top, in the autosampler and in storage (freeze–thaw cycles and long-term storage at −80 ° C). A pharmacokinetic study in rats was performed to show the applicability of the validated method.     

Positive Solutions to Singular Boundary Value Problems with Sign Changing Nonlinearities on the Half-Line via Upper and Lower Solutions

This paper presents a lower and upper solution technique for singular second order boundary value problems on the half line.     

The impact of bubbles on measurement of drug release from echogenic liposomes

Echogenic liposomes (ELIP) encapsulate gas bubbles and drugs within lipid vesicles, but the mechanisms of ultrasound-mediated drug release from ELIP are not well understood. The effect of cavitation activity on drug release from ELIP was investigated in flowing solutions using two fluorescent molecules: a lipophilic drug (rosiglitazone) and a hydrophilic drug substitute (calcein). ELIP samples were exposed to pulsed Doppler ultrasound from a clinical diagnostic ultrasound scanner at pressures above and below the inertial and stable cavitation thresholds. Control samples were exposed to a surfactant, Triton X-100 (positive control), or to flow alone (negative control). Fluorescence techniques were used to detect release. Encapsulated microbubbles reduced the measured fluorescence intensity and this effect should be considered when assessing drug release from ELIP. The origin of this effect is not specific to ELIP. Release of rosiglitazone or calcein compared to the negative control was only observed with detergent treatment, but not with ultrasound exposure, despite the presence of stable and inertial cavitation activity. Release of rosiglitazone or calcein from ELIP exposed to diagnostic ultrasound was not observed, even in the presence of cavitation activity. Ultrasound-mediated drug delivery strategies with ELIP will thus rely on passage of the drug-loaded liposomes to target tissues.     

Carbon solubility and superconductivity in MgB2

Successful replacement of B by C in the series MgB_2−xC_x for values of x upto 0.3 is reported. Resistivity and ac susceptibility measurements have been carried out in the samples. Solubility of carbon, inferred from the observed change in the lattice parameter with carbon content indicates that carbon substitutes upto x=0.30 into the MgB₂ lattice. The superconducting transition temperature, T_c measured both by zero resistivity and the onset of the diamagnetic signal shows a systematic decrease with increase in carbon content upto x=0.30, beyond which the volume fraction decreases drastically. The temperature dependence of resistivity in the normal state fits to the Bloch–Gruneisen formula for all the carbon compositions studied. The Debye temperature, θ_D, extracted from the fit, is seen to decrease with carbon content from 900 to 525 K, whereas the electron–phonon interaction parameter, λ, obtained from the McMillan equation using the measured T_c and θ_D, is seen to increase monotonically from 0.8 in MgB₂ to 0.9 in the x=0.50 sample. The ratio of the resistivities between 300 and 40 K versus T_c is seen to follow the Testardi correlation for the C substituted samples. The decrease in T_c is argued to mainly arise due to large decrease in θ_D with C concentration and a decrease in the hole density of states at N(E_F).     

Surface studies on bimetallic thiocyanate ligand based single crystals of MnHg(SCN)4, CdHg(SCN)4 and ZnCd(SCN)4

Bimetallic SCN ligand based single crystals of manganese mercury thiocyanate (MMTC), cadmium mercury thiocyanate (CMTC) and zinc cadmium thiocyanate (ZCTC) are grown by slow solvent evaporation technique. The growth mechanism and surface features are investigated by optical microscopic techniques such as scanning electron microscopy (SEM) and atomic force microscopy (AFM). The laser induced surface damage measurements were carried out using a Q-switched Nd:YAG laser at 1064 nm with laser beam of 1.0 Hz and pulse duration 25 ps. The laser damage threshold values of MMTC, CMTC and ZCTC are found to be 15.9, 22.9 and 19.7 GW/cm², respectively. The SEM analysis of MMTC reveals the formation of elongated dendrite growth pattern caused by the fluctuations of Mn and Hg metal ligands when thiocyanate (SCN) bridges them. The etching study indicates the occurrence of different types of etch pit patterns like terraced triangles, pillars, pyramids and rods. The AFM images confirm the formation of three major hillocks with cavities in MMTC. The measured roughness values for CMTC crystal are very much lower than that of MMTC.     

Ply-by-Ply Failure Analysis of Laminates Under Dynamic Loading

Ply-by-ply failure analysis of symmetric and anti-symmetric laminates under uniform sinusoidal transverse dynamic loading is performed for a specified duration. The study investigates the first ply failure load, followed by the detection of successive ply failures along with their failure modes using various failure theories. Some of the well-established failure theories, mostly used by the researchers, are considered for the failure prediction in laminates. The finite element computational model based on higher order shear deformation displacement field is used for the failure analysis and the complete methodology is computer coded using FORTRAN. The ply-discount stiffness reduction scheme is employed to modify the material properties of the failed lamina. The failure theories used in the analysis are compared according to their ability to predict failure load, failed ply, failure mode and progression of failure. The failure analysis is performed for both the cross-ply and angle-ply laminates with all edges simply supported and clamped. The significance of fibre orientation and stacking sequence in terms of the strength of a laminate and failure progression is also highlighted.     

On pathwise behavior of multiserver queues

In this paper, by exploiting recent results on the pathwise behavior of the workload process in single server, work conserving queues of theG/G/1/ type, we show that the workload of multiserver, work conserving queues ofG/G/m/ (m<) (andG/G/) queues satisfies an o(t) growth condition, provided that the time average of the work brought into the system is less thanm form < (and finite form=).     

Theoretical studies on the structure,sensitivity, density,thermodynamic properties and detonation performance of dinitrobitriazoles

Azodinitro- and dinitroethylene-bridged bitriazoles are of interest in the contest of high explosives, and were found to have true local energy minima at the B3LYP/aug-cc-pVDZ level of theory. The optimised structures, vibrational frequencies and thermodynamic quantities for bitriazoles were obtained in the ground state. Kamlet–Jacobs equations were used to evaluate the performance of bitriazoles based on the predicted density and the calculated heat of explosion. Detonation properties (D = 8.12 to 9.23 km s^?1 and P = 28.0 to 39.83 GPa) of bitriazoles were found to be promising compared with those of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX, D = 8.75 km s^?1 and P = 34.7 GPa) and octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX, D = 8.96 km s^?1 and P = 35.96 GPa). The fusion of azoles particularly appears to be a promising area for investigation, since it may lead to the desirable consequences of higher heat of explosion, higher density and thus improved detonation performance.