Electrodeposition of cobalt on stainless steel foils. Preparation of57Co sources for Mössbauer experiments

Conditions for the electrodeposition of⁵⁹Co and⁵⁷Co on stainless steel foils have been studied. A set of electrolytic parameters has been determined to get a reasonably good electrodeposited sample. The⁵⁷Co electrodeposited foil was then introduced in a quartz tube to be annealed in an argon flow. The final product was a 11 Ci Mössbauer source for college experiments which was succesfully tested by obtaining spectra of stainless steel and sodium nitroprusside.     

Effects of genesis and ionizing radiation on the kinetics of reduction of NiO-CeO2 mixed oxides with hydrogen

The reduction of mixed oxides NiO-CeO₂ of various composition with hydrogen was studied at 290–470° by means of thermogravimetry. Some physicochemical properties of the system were also investigated and compared with earlier studied analogous samples of different “origin”. The degree of mutual interaction of the two components, the reduction kinetics and the sensitivity to the different sorts of radiation (gamma-rays, fast neutrons and electrons), applied in different doses, are strongly affected by the “pre-history” and by the composition in both compared series of mixed oxides.     

Extraction of the [(C4H9)4N]3[Fe(SCN)6] ion-pair with chloroform: Spectrophotometric determination of iron

When excesses of ammonium thiocyanate and tetrabutylammonium chloride are added to an iron(III) solution, a water-insoluble ion-pair is formed. This compound is soluble in chloroform and other organic solvents. The variables affecting extraction with CHCl₃ are studied in order to obtain the optimal conditions and an extraction procedure is proposed. The separation of iron as a previous step to its spectrophotometric determination is studied.     

Thermal Analysis of the System Na3AlF6–NaVO3

Summary. The phase diagram of the system Na₃AlF₆–NaVO₃ was determined by means of thermal analysis. The system is a simple binary eutectic one. The eutectic point was estimated at x(NaVO₃) = 0.975 and t _eut = 617°C. The XRD patterns of samples after thermal analysis revealed the presence of cryolite and NaVO₃ only supporting the above assumption of a simple eutectic binary system.     

Differential pulse polarographic determination of salicylaldehyde as its Girard-P derivative

A method for the determination of salicylaldehyde (2 × 10^–6–10^–4 M) by differential-pulse polarography, based on the in situ formation of its Girard-P derivative in aqueous solution at pH 2.5, is proposed. The relative standard deviation was 1.5% (ten determinations of 4 × 10^–5 M level). The applicability of this method was checked in synthetic samples containing salicyl alcohol,o-aminophenol, 2-methylphenol, salicylic acid and 4-aminobenzoic acid.     

Stability study of simvastatin under hydrolytic conditions assessed by liquid chromatography

In this work, a liquid chromatography stability-indicating method was developed and applied to study the hydrolytic behavior of simvastatin in different pH values and temperatures. The selected chromatographic conditions were a C18 column; acetonitrile-28 mM phosphate buffer solution, pH 4 (65 + 35) as the mobile phase; 251 degrees C column temperature; and flow rate 1 mL/min. The developed method exhibited an adequate repeatability and reproducibility (coefficient of variation 0.54 and 0.74%, respectively) and a recovery higher than 98%. Furthermore, the detection and quantification limits were 9.1 x 10(-7) and 2.8 x 10(-6) M, respectively. The degradation of simvastatin fitted to pseudo-first order kinetics. The degradation was pH dependent, being much higher at alkaline pH than at acid pH. Activation energy, kinetic rate constants (k) at different temperatures, the half life (t1/2) and the time for 10% degradation to occur (t90) values are also reported.     

Book review

S. E. J_rgensen and Yu. M. Svirezhev Towards a Thermodynamic Theory for Ecological Systems Elsevier, Amsterdam 2004, Price: paperback 85€; hardbound 140€, 350 (A4 size) pages     

Darstellung und einige Eigenschaften von Kupfer(I)-Kupfer(II)-Selenocyanaten

Preparation and Some Characteristics of Copper(I)-Copper(II) Selenocyanates From the system Cu²⁺-H₂O-en-SeCN-in dependence on the conditions two new complexes have been prepared: Cu₃en₂(SeCN)(CN)₃· H₂O(I) and Cu₃en₂(SeCN)₂(CN)₂· H₂O(II). They were studied by the methods of infra-red and EPR spectra as well as by those of X-ray diffraction. It has been found that Cu₂₊ is coordinated in these complexes with two molecules of ethylene diamine and one molecule water. The anion ligands have a bridging function and coordinate the copper(I). The EPR spectra show that the two complexes exhibit around the atom Cu²⁺ have different ligand field symmetry. For complex (I) it is a typically axial spectrum with two values of the gfactor g⊥? 2.18 and g⊥? 2.05 while complex (II) has an asymmetrical isotropic spectrum with one g-factor value only g⊥? 2.07.     

Spectroscopic investigation of the adsorption and oxidation of thiourea on polycrystalline Au and Au(111) in acidic media

In the present paper, a systematic electrochemical investigation on thiourea (TU) electrooxidation was developed on polycrystalline and (111) single-crystal gold electrodes in 0.1 M perchloric acid. The combination of cyclic voltammetry with in situ Fourier transform infrared spectroscopy (FTIRS) and differential electrochemical mass spectrometry techniques have allowed the nature of the species formed during the electroadsorption and electrooxidation of TU to be established. FTIRS experiments were performed in D2O to clean up the region of the H2O bending around 1600 cm(-1). It was concluded that TU adsorbs tilted on the surface in the 0.05-0.40 VRHE potential range. A dual-path reaction mechanism was evidenced in the oxidation process. The first pathway takes place from adsorbed TU at E > 0.40 VRHE and implies the formation of [Au(I)-(TU)2]+, which is oxidized to NH2CN and S0 at E > 0.80 VRHE. In a following oxidation step at E > 1.20 V, N2, CO2, and HSO4-/SO4(2-) were produced. The second parallel reaction occurs from TU in solution at E > 0.50 VRHE to form (TU)2(2+). All these species were characterized from the spectroscopic experiments. Similar results were obtained for both surfaces.