Regioselective homogeneous hydrogenation of heteroaromatic nitrogen compounds by use of [RuH(CO)(NCMe)2(PPh3)2]BF4 as the precatalyst

Summary The complex [RuH(CO)(NCMe)₂(PPh₃)₂]BF₄ (1) is an efficient and regioselective catalyst precursor for the hydrogenation of polyaromatic nitrogen compounds such as quinoline (Q), isoquinoline (iQ), indole (ln), 5,6- and 7,8-benzoquinoline (BQ) and acridine (A) under relatively mild reaction conditions (125 °C, 4 atm H₂). The order of individual initial rates was: A > Q > 5,6-BQ > 7,8-BQ > ln > iQ, reflecting both steric and electronic effects. For the regioselective homogeneous hydrogenation of A to 9,10-dihydroacridine (DHA) catalysed by complex (1), a kinetic study was carried out; the experimentally determined rate law was r = k ₁ [Ru] [H₂]. These findings are consistent with a mechanism involving the hydrogenation of [RuH(CO)(A)(NCMe)(PPh₃)₂]BF₄ to yield DHA and the unsaturated species [RuH(CO)(NCMe)(PPh₃)₂]BF₄ in the rate-determining step.     

Magnetic properties of biacetyldihydrazone complexes

Summary Magnetic susceptibilities of the biacetyldihydrazone (BdH) complexes [M(BdH)₃](NO₃)₂ (M = Co^II, Ni^II, Cu^II or Zn^II), [Fe(BdH)₃](NO₃)₃, [M(BdH)₃](Ni(dto)₂] (M = Co^II, Ni^II or Zn^II; dto = dithiooxalate), [(BdH)₂Cu(dto)Ni(dto)] and [Fe(BdH)₃]₂[Ni(dto)₂]₃ have been studied in the 4.2–295 K range. Zn^II complexes are diamagnetic, and complexes of Ni^II, Cu^II and Fe^III obey the Curie-Weiss law. The Co^II complexes behave anomalously and the results are interpreted in terms of a high spinlow spin equilibrium.     

Spectrophotometric determination of chlorhexidine with bromocresol green by flow-injection and manual methods

A spectrophotometric study of the chlorhexidine/bromocresol green/Triton X-100 system is reported; at pH 5.3, both 2:1 and 1:1 bromocresol green/chlorhexidine complexes are formed. In the manual spectrophotometric method, Beer's law is obeyed for chlorhexidine concentrations of 2.9–32.2 μg ml^?1 (r.s.d. 0.4–1.3%); the molar absorptivity is 12 500 l mol^?1 cm^?1. In the flow-injection method, the calibration graph is linear for the chlorhexidine range 23.0–83.9 μg ml^?1 (r.s.d. 0.8%); the injection is ca. 60 h^?1. Benzocaine, acetylsalicylic acid, ascorbic acid and sucrose are tolerated at 10^?2?10^?3 M levels. Hibitane 5% was analyzed successfully.     

Determination and lebels of99Tc in environmental and biological samples

In this paper, the physical and chemical methods used in our laboratory for the measurement of⁹⁹Tc in natural samples are reviewed. Levels of⁹⁹Tc in rainwater, algae, and freshwater samples are given. In addition, and estimation of the radiological impact of⁹⁹Tc to the population, derived from our earliear atmospheric⁹⁹Tc measurements, is presented. For rainwater, levels of¹³⁷Cs are also given for comparison.Work partially supported by the contract PB86-0207 of the Spanish CICYT.     

Triplex and quadruplex DNA structures studied by electrospray mass spectrometry

DNA triplex and quadruplex structures have been successfully detected by electrospray ionization mass spectrometry (ESI-MS). Circular dichroism and UV-melting experiments show that these structures are stable in 150 mM ammonium acetate at pH 7 for the quadruplexes and pH 5.5 for the triplexes. The studied quadruplexes were the tetramer [d(TGGGGT)](4), the dimer [d(GGGGTTTTGGGG)](2), and the intramolecular folded strand dGGG(TTAGGG)(3), which is an analog of the human telomeric sequence. The absence of sodium contamination allowed demonstration of the specific inclusion of n - 1 ammonium cations in the quadruplex structures, where n is the number of consecutive G-tetrads. We also detected the complexes between the quadruplexes and the quadruplex-specific drug mesoporphyrin IX. MS/MS spectra of [d(TGGGGT)](4) and the complex with the drug are also reported. As the drug does not displace the ammonium cations, one can conclude that the drug binds at the exterior of the tetrads, and not between them. For the triplex structure the ESI-MS spectra show the detection of the specific triplex, at m/z values typically higher than those typically observed for duplex species. Upon MS/MS the antigene strand, which is bound into the major groove of the duplex, separates from the triplex. This is the same dissociation pathway as in solution. To our knowledge this is the first report of a triplex DNA structure by electrospray mass spectrometry.     

Two isomeric phosphacarboranes 2,1- and 6,1-PCB(8)H(9), the first representatives of the 10-vertex closo phosphacarborane Series

The reaction between arachno-4-CB(8)H(14) and PCl(3) in the presence of PS (PS = proton sponge = 1,8-dimethylamino naphthalene) (dichloromethane, rt, 24 h) produced the neutral phosphacarborane closo-2,1-PCB(8)H(9) (35% yield), while a similar reaction of nido-1-CB(8)H(12) gave the isomeric compound closo-6,1-PCB(8)H(9) (27% yield). The structures of both compounds were derived on the basis of the combined ab initio/GIAO/NMR ((1)H, (11)B, (13)C) approach. The optimized structures at a correlated level of theory (MP2) with 6-31G* basis set were used as a basis for calculations of the (11)B and (13)C chemical shifts at GIAO-SCF/II and GIAO-MP2/II, the latter showing excellent agreement with experimental data.     

A sensitive spectrophotometric method for lead determination by flow injection analysis with on-line preconcentration

A new flow injection (FI) system for the determination of Pb(II) at trace level with a preconcentration step and spectrophotometric detection is proposed. It is based on preconcentration of lead ions on chitosan and dithizone-lead complex formation in aqueous medium (pH 9). The chemicals and FIA variables influencing the performance of the system were optimized and applied to the determination of lead in natural, well, and drinking water samples. It is a simple, highly sensitive, and low cost alternative methodology. The method provided a linear rage between 25 and 250 μg l⁻¹, a detection limit of 5.0 ng ml⁻¹ and a sample throughput of 15 h⁻¹. The obtained results of spiked samples are in good agreement between the proposed method and ICP-AES.     

Transformation of dynamic DSC results into isothermal data for the curing kinetics study of the resol resins

Kinetics of thermosetting polymers curing is difficult to study by isothermal methods based on the differential scanning calorimetry (DSC) technique. The difficulty is due to the low sensitivity of the equipment for total reaction heat measurements during high temperature process. The aim of this paper is to display the equivalence between a dynamic model, the Ozawa method, and an isothermal isoconversional fit, which allows predicting the isothermal behavior of the resol resins cure through dynamic runs by DSC. In this work, lignin–phenol–formaldehyde and commercial phenol–formaldehyde resol resins were employed. In addition, the isothermal kinetic parameters for both resins were performed by means of transformation of the data obtained from the dynamic Ozawa method.     

Energetics of hydroxybenzoic acids and of the corresponding carboxyphenoxyl radicals. Intramolecular hydrogen bonding in 2-hydroxybenzoic acid

The energetics of the phenolic O-H bond in the three hydroxybenzoic acid isomers and of the intramolecular hydrogen O-H- - -O-C bond in 2-hydroxybenzoic acid, 2-OHBA, were investigated by using a combination of experimental and theoretical methods. The standard molar enthalpies of formation of monoclinic 3- and 4-hydroxybenzoic acids, at 298.15 K, were determined as Delta(f)(3-OHBA, cr) = -593.9 +/- 2.0 kJ x mol(-1) and Delta(f)(4-OHBA, cr) = -597.2 +/- 1.4 kJ x mol(-1), by combustion calorimetry. Calvet drop-sublimation calorimetric measurements on monoclinic samples of 2-, 3-, and 4-OHBA, led to the following enthalpy of sublimation values at 298.15 K: Delta(sub)(2-OHBA) = 94.4 +/- 0.4 kJ x mol(-1), Delta(sub)(3-OHBA) = 118.3 +/- 1.1 kJ x mol(-1), and Delta(sub)(4-OHBA) = 117.0 +/- 0.5 kJ x mol(-1). From the obtained Delta(f)(cr) and Delta(sub) values and the previously reported enthalpy of formation of monoclinic 2-OHBA (-591.7 +/- 1.3 kJ x mol(-1)), it was possible to derive Delta(f)(2-OHBA, g) = -497.3 +/- 1.4 kJ x mol(-1), Delta(f)(3-OHBA, g) = -475.6 +/- 2.3 kJ x mol(-1), and Delta(f)(4-OHBA, cr) = -480.2 +/- 1.5 kJ x mol(-1). These values, together with the enthalpies of isodesmic and isogyric gas-phase reactions predicted by density functional theory (B3PW91/aug-cc-pVDZ, MPW1PW91/aug-cc-pVDZ, and MPW1PW91/aug-cc-pVTZ) and the CBS-QMPW1 methods, were used to derive the enthalpies of formation of the gaseous 2-, 3-, and 4-carboxyphenoxyl radicals as (2-HOOCC(6)H(4)O(*), g) = -322.5 +/- 3.0 kJ.mol(-1) Delta(f)(3-HOOCC(6)H(4)O(*), g) = -310.0 +/- 3.0 kJ x mol(-1), and Delta(f)(4-HOOCC(6)H(4)O(*), g) = -318.2 +/- 3.0 kJ x mol(-1). The O-H bond dissociation enthalpies in 2-OHBA, 3-OHBA, and 4-OHBA were 392.8 +/- 3.3, 383.6 +/- 3.8, and 380.0 +/- 3.4 kJ x mol(-1), respectively. Finally, by using the ortho-para method, it was found that the H- - -O intramolecular hydrogen bond in the 2-carboxyphenoxyl radical is 25.7 kJ x mol(-1), which is ca. 6-9 kJ x mol(-1) above the one estimated in its parent (2-OHBA), viz. 20.2 kJ x mol(-1) (theoretical) or 17.1 +/- 2.1 kJ x mol(-1) (experimental).     

Solvent extraction behaviour of iodine and bromine in aqueous-organic systems,analogy with radioactive decay

The extraction of iodine and bromine under various conditions from their saturated aqueous solutions by CCl₄, C₆H₆ and o-xylene has been studied. The data obtained from the experiments carried out at various temperatures, for H₂O(I₂)−CCl₄ and H₂O(I₂)−C₆H₆ systems, exhibit an Arrhenius behaviour. The overall activation energy calculated for the extraction in the H₂O(I₂)−CCl₄ system, 650±50 cal·mol⁻¹ is lower than that of H₂O(I₂)−C₆H₆, 3600±300 cal·mol⁻¹. The use of the solubility parameter for the interpretation of the data in the extraction of iodine is investigated. The data obtained in multiple extractions are treated by using the analogy between extraction and radioactive decay. The half number of extraction for each system is determined. The complex curves obtained in the H₂O(I₂)−CCl₄ and H₂O(I₂) −Br₂)−CCl₄ systems are resolved into two components.