GC‐FID determination and pharmacokinetic studies of oleanolic acid in human serum

Analytical interest of OA determination in human serum has increased owing to the increasing interest in pharmaceutical research by pharmaceutical properties. A simple, specific, precise and accurate GC method with flame ionization detector (FID) developed and validated for the determination of oleanolic acid (OA) in human serum (HS). To an aliquot of HS, internal standard was added and a combination of liquid–liquid extraction with a mixture of diethyl ether‐isopropyl alcohol, filtration and consecutive GC resulted in separation and quantification of OA. The organic phase was analyzed using a GC system equipped with a 30 × 0.25 mm i.d. Rtx‐65TG capillary column and FID detection. Total chromatographic time was 10 min and no interfering peaks from endogenous components in blank serum were observed. The OA/internal standard peak area ratio was linearly fitted to the OA concentration (r = 0.992) over the range 10–1500 ng/mL. The mean serum extraction recovery of OA was 96.7 ± 1.0% and the lower limit of quantification based on 5 mL of serum was 10.7 ng/mL. The intra‐day coefficient of variation ranged from 1.3 to 3.6% and inter‐day varied from 1.4 to 4.5%. The developed method was used to study the pharmacokinetics of OA after oral administration in humans. The assay was simple, sensitive, precise and accurate for the use in the study of the mechanisms of absorption and distribution of OA in humans. Copyright © 2015 John Wiley & Sons, Ltd.     

Relationships between structure, retention and biological activity of some Schiff base ligands and their complexes

The lipophilicity of a series of Schiff base ligands and their complexes with nickel(II) and copper(II) has been determined by reversed-phase thin-layer chromatography using binary dioxane-water mobile phase. Chelate ligands were prepared by condensation of diamine and the corresponding beta-diketone. Copper(II) and nickel(II) complexes with chelate ligands containing ethane-1,2-diamine or propane-1,2-diamine as the amine part and pentane-2,4-dione and/or 1-phenylbutane-1,3-dione, pentane-2,4-dione and/or 1,1,1-trifluoropentane-2,4-dione, or 1,1,1-trifluoropentane-2,4-dione and/or 1-phenylbutane-1,3-dione as the beta-diketone part were synthesized. Some of investigated compounds were screened for their in vitro antifungal activity against Sacharomyces cerevisiae and antibacterial activity against Escherichia coli. Chromatographically obtained lipophilicity parameters were correlated both with calculated n-octanol-water partition coefficient C log P and antimicrobial activities. Satisfactory correlations were obtained. Chromatographic data proved to be reliable parameters for describing the lipophilic properties of the investigated compounds. Additionally, the principal components analysis was performed on the data chromatographically obtained. This statistical method was useful for distinguishing compounds and objective comparison of their lipophilicity parameters.     

Structural study of ternary iron-lead-germanate glass ceramics

Glass ceramics with the composition xFe(2)O(3)·(100-x)[7GeO(2)·3PbO(2)] where 0≤x≤60 mol% were obtained and studied using XRD, FTIR and UV-vis spectroscopy investigations. Heat treatment of glass samples at 400°C for 8 h led to the formation of α, γ-PbGe(4)O(9), Pb(3)Fe(2)Ge(4)O(14) and PbO(1.44) crystalline phases. The content of these crystalline phases depends of Fe(2)O(3) concentration. FTIR spectroscopy data suggest that the lead ions have a pronounced affinity towards [GeO(5)] structural units containing non-bridging oxygens and [FeO(4)] anions producing formation of the Pb(3)Fe(2)Ge(4)O(14) crystalline phase. The introduction of low concentrations of Fe(2)O(3) into the host matrix results in the formation of new absorption UV bands between 320 and 450 nm. These bands arise from to the d-d transitions of the Fe(+3) ions. The light absorption in the range from 250 to 600 nm increases with increasing iron oxide content in matrix network, accompanied with the changes on color from white to brown yellow and darker brown.     

Surface tension of liquid Cu-Ti binary alloys measured by electromagnetic levitation and thermodynamic modelling

The surface tension of liquid Cu-Ti alloys has been measured by using the containerless technique of electromagnetic levitation and theoretically calculated in the framework of the compound formation model. Measurements have been carried out on alloys covering the entire range of composition and over the temperature range 1275-2050 K. For all investigated alloys the surface tension can be described by a linear function of the temperature with negative slope.Due to the presence of different intermetallic compounds in the solid state the surface properties of liquid Cu-Ti alloys are satisfactory described by the compound formation model.     

Dinuclear manganese centers in the manganese-lead-tellurate glasses

FTIR, UV-VIS and EPR spectra of manganese doped lead-tellurate glasses with composition xMnO·(100-x)[4TeO2·PbO2] where x=0, 1, 5, 10, 20, 30, 40mol% have been studied. The FTIR spectra show the formation of the Mn-O-Pb and Mn-O-Te bridging bonds by increasing of MnO concentration. The UV-VIS spectra show the Mn(+3) species exhibit pronounced absorption, which masks the Mn(+2) spin-forbidden absorption bands when Mn(+2) ions are in high concentrations in these glasses. The EPR spectra exhibit resonance signals characteristic of Mn(+2) ions. The resonance signal located at g≈2 is due to Mn(+2) ions in an environment close to octahedral symmetry, whereas the resonance at g≈4.3 and 3.3 are attributed to the rhombic surroundings of the Mn(+2) ions. The increase in the MnO content gives rise to absorption at g≈2.4 and the paramagnetic ions are involved in dinuclear manganese centers.     

Alkalimetalle

Ohne Zusammenfassung     

Lower bounds for the energy of digraphs

The energy of a digraph D is defined as , where z₁,…,z_n are the eigenvalues of D. In this article we find lower bounds for the energy of digraphs in terms of the number of closed walks of length 2, extending in this way the result obtained by Caporossi et al. [G. Caporossi, D. Cvetkovi?, I. Gutman, P. Hansen, Variable neighborhood search for extremal graphs. 2. Finding graphs with extremal energy, J. Chem. Inf. Comput. Sci. 39 (1999) 984-996]: for all graphs G with m edges. Also, we study digraphs with three eigenvalues.     

CXCL10 blockade protects mice from cyclophosphamide-induced cystitis

Background  

Alterations in serum CXCR3 ligand levels were examined in interstitial cystitis (IC) patients; similar expression patterns in serum as well as CXCR3, CXCR3 ligands, and cytokines expressed by peripheral and local leukocyte subpopulations were characterized during cyclophosphamide (CYP)-induced acute cystitis in mice.