An investigation of enhanced secondary ion emission under Au n + (n=1–7) bombardment

We investigate the mechanism of the nonlinear secondary ion yield enhancement using Au(n)+ (n = 1, 2, 3, 5, 7) primary ions bombarding thin films of Irganox 1010, DL-phenylalanine and polystyrene on Si, Al, and Ag substrates. The largest differences in secondary ion yields are found using Au+, Au2+, and Au3+ primary ion beams. A smaller increase in secondary ion yield is observed using Au5+ and Au7+ primary ions. The yield enhancement is found to be larger on Si than on Al, while the ion yield is smaller using an Au+ beam on Si than on Al. Using Au(n)+ ion structures obtained from Density Functional Theory, we demonstrate that the secondary yield enhancement is not simply due to an increase in energy per area deposited into the surface (energy deposition density). Instead, based on simple mechanical arguments and molecular dynamics results from Medvedeva et al, we suggest a mechanism for nonlinear secondary ion yield enhancement wherein the action of multiple concerted Au impacts leads to efficient energy transfer to substrate atoms in the near surface region and an increase in the number of secondary ions ejected from the surface. Such concerted impacts involve one, two, or three Au atoms, which explains well the large nonlinear yield enhancements observed going from Au+ to Au2+ to Au3+ primary ions. This model is also able to explain the observed substrate effect. For an Au+ ion passing through the more open Si surface, it contacts fewer substrate atoms than in the more dense Al surface. Less energy is deposited in the Si surface region by the Au+ primary ion and the secondary ion yield will be lower for adsorbates on Si than on Al. In the case of Au(n)+ the greater density of Al leads to earlier break-up of the primary ion and a consequent reduction in energy transfer to the near-surface region when compared with Si. This results in higher secondary ion yields and yield enhancements on silicon than aluminum substrates.     

Isotopic scrambling in Di-13C-labeled 2-butyl cation: evidence for a protonated cyclopropane intermediate

The (13)C NMR spectrum of 2-butyl-1,2-(13)C(2) cation (1) is unchanged on heating the sample to -78 degrees C, indicating no isomerization to another isotopomer. In contrast, the spectrum of 2-butyl-2,3-(13)C(2) cation (2) shows rapid formation of all of the other isotopomers except 1. These results are consistent with a protonated cyclopropane intermediate in the rearrangement process. In this mechanism, either C(1) and C(2) or C(3) and C(4) interchange. Only the bond between C(2) and C(3) breaks.     

Cofactor-dependent enzyme catalysis in functionalized ionic solvents

Functionalized, hydrogen-bonding ionic liquids have been successfully evaluated as media for the performance of cofactor-dependent enzyme catalysed oxidations; the effects of incorporating hydroxyl groups into both the cation and anion have been studied and the dependence of activity upon water content has been evaluated.     

The chemistry of 2'' ,3''-seconucleosides II. Reactions and biological properties of 2'',3''-secopyrimidine ribonucleosides

Reaction of 2',3'-secouridine with acetone gave the 3',5'-$\text{O}$-isopropylidene derivative (1) which upon treatment with mesylchloride gave the 2'-$\text{O}$-mesyl compound (2). Replacement of the mesyl group of 2 with halide could be effected by reaction with a metal halide in DMF. The 3',5'-$\text{O}$-isopropylidene group was removed simultaneously to give a 2'-halogeno-2'-deoxy-2',3'-secouridine. 2',3'-Dichloro-2',3'-dideoxy-2',3'-secouridine upon treatment with base gave 6($\text{R}$)-chloromethyl-2($\text{R}$)-(uracil-1-yl)-1,4-dioxane in addition to O²,2'-anhydro-3'-chloro-3'-deoxy-2',3'-secouridine, as previously reported. 2',3'-Dichloro-2',3'-dideoxy-5'-0-trityl-2',3'-secouridine was converted to 2',3'-dichloro-2',3'-dideoxy-2',3'-secocytidine (16) $\text{via}$ a triazole derivative. Compound 16 was unstable and appeared to form O²,2'-anhydro-3'-chloro-3'-deoxy-2,3'-secocytidine upon standing at room temperature. 5-Vinyl- and 5-($\text{E}$) (2-bromovinyl) uridine dialdehydes have been made, as well as a number of other 5-substituted 2',3'-secouridine derivatives. None of the compounds obtained showed significant activity against a number of virus strains or tumor cell lines, except for 5-($\text{E}$)(2-bromovinyl) uridine dialdehyde, which was inhibitory to the growth of human lymphoblast (Raji, Namalva) cells at a concentration of 28 μ/ml.     

The synthesis of the potent anti-herpes virus agent, E-5(2-bromovinyl)-2′-deoxyuridine and related compounds

The synthesis of $\text{E}$-5(2-bromovinyl)-2′-deoxyuridine in good yield from deoxyuridine $\text{via}$ an intermediate organopalladium derivative is described. The corresponding chloro and iodo compounds have also been made as have the corresponding bromo and iodo 2′-deoxycytidines.     

Synthesis of 3,4-disubstituted piperidines by ene cyclisation of 4-aza-1,7-dienes

Ene cyclisation of a variety of 4-aza-1,7-dienes affords 3,4-disubstituted piperidines. In particular, cyclisation of diesters 14 and 20 catalysed by MeAlCl₂ gives the corresponding trans 3,4-disubstituted piperidines with diastereomeric ratios of >200:1.     

Amide bond formation using an air-stable source of AlMe3

Synthesis of amides from coupling esters with a range of primary amines can be conveniently achieved in moderate to excellent yields (69-99%) using an air-stable adduct of trimethylaluminium (AlMe₃)₂·DABCO (DABCO is 1,4-diazobicyclo[2.2.2]octane), referred to as DABAL-Me₃. Reactions can be run without requiring the exclusion of atmospheric oxygen or the drying of solvents.     

Mechanisms of decomposition of mixtures of ethyl acetate and isopropyl bromide subjected to pulsed infrared laser irradiation

The infrared laser induced decomposition of mixtures of ethyl acetate and isopropyl bromide has been studied. The ratio of the yields of products ethylene and propylene, arising from the unimolecular decomposition reactions: ethyl acetate → ethylene + acetic acid, and isopropyl bromide → propylene + hydrogen bromide, were measured as a function of the ratio of ethyl acetate to isopropyl bromide and pressure of added helium. The results indicate clearly that in these systems non-equilibrium behavior is found up to the highest pressures used (about one atmosphere). A two level kinetic model is suggested which qualitatively explains the observations.     

Isomerization of 2,5-divinyltetrahydropyran and acid-catalyzed rearrangements of isomeric novel dihydropyrans

2,5-Divinyltetrahydropyran (1) can be isomerized using a ruthenium trichloride- triphenylphosphine catalyst to give 3,4-dihydro-3-vinyl-6-ethyl-2H-pyran (2) and 3,4-dihydro-3- ethylidene-6-ethyl-2H-pyran (3). These products give a variety of rearranged products on treatment with acid. The course of the reactions can be controlled by reaction conditions to give 4-ethyltoluene (5) or 3-hydroxymethyl-1-octen-6-one (4) from 2, and 3,4-dihydro-2-methyl-3-methylene-(6-ethyl-2H- pyran (7), 2,3,4-trimethyl-2-cyclohexen-1-one (8), or 3-hydroxymethyl-2-octen-6-one (6) from 3. All of these products (4–8) can be explained as arising by the initial opening of the dihydropyran to generate an unsaturated hydroxy ketone which then cyclizes to carbocyclic products.     

The work of ISO-REMCO’s accreditation task group

This paper discusses some of the work of ISO-REMCO’s Task Group 4 (TG4) – the Accreditation TG, giving firstly a brief account of the recently published ISO Guide 34 – which gives guidance on the type of quality system a reference material producer should have in place. Secondly, work on the future development of Guide 34 to produce a document against which it will be possible for producers to be accredited without reference to ISO Guide 25 is discussed, and thirdly, the possible formation of an international register of CRM producers, which will provide users with information about the quality status of different producers, is considered.