Gold adatoms and clusters on PPV: An ab initio investigation

We have performed an ab initio investigation of the energetic, structural, electronic, and vibrational properties of Au atoms and clusters adsorbed on poly-p-phenylene vinylene (PPV) chains, Au(n)/PPV (with n =?1, 2, 6, 7, 10, and 12). We find that the Au(n)/PPV systems are energetically stable by 0.5 eV, compared with the isolated systems, viz., PPV chain and Au(n) clusters, thus supporting the formation of Au(n)/PPV nanocomposites. Further support to the formation of Au(n)/PPV has been provided by examining the vibrational properties of pristine PPV and Au(n)/PPV systems. In agreement with experimental measurements, we find a reduction on the in-plane vibrational frequency of C-C bonds of Au(n)/PPV, when compared with the same vibrational modes of pristine PPV. The electronic properties of isolated Au(n) clusters are modified when adsorbed on PPV. The highest occupied states of Au(n)/PPV are mostly concentrated on the Au(n) cluster, while the lowest unoccupied states are mainly localized along the PPV chain. The HOMO-LUMO energy gap of the Au(n)/PPV systems are smaller than the energy gap of the isolated systems, Au(n) clusters, and pristime PPV chains.     

Parallel generation of quadripartite cluster entanglement in the optical frequency comb

Scalability and coherence are two essential requirements for the experimental implementation of quantum information and quantum computing. Here, we report a breakthrough toward scalability: the simultaneous generation of a record 15 quadripartite entangled cluster states over 60 consecutive cavity modes (Q modes), in the optical frequency comb of a single optical parametric oscillator. The amount of observed entanglement was constant over the 60 Q modes, thereby proving the intrinsic scalability of this system. The number of observable Q modes was restricted by technical limitations, and we conservatively estimate the actual number of similar clusters to be at least 3 times larger. This result paves the way to the realization of large entangled states for scalable quantum information and quantum computing.     

Mitigation of lunar dust adhered to mechanical parts of equipment used for lunar exploration

A unique cleaning system has been developed utilizing electrostatic force to remove lunar dust adhered to the mechanical parts of equipment used for lunar exploration. A single-phase voltage is applied to parallel electrodes printed on a flexible substrate to remove the dust. More than 90% of adhered dust was repelled from the surface of the slightly inclined device in a vacuum, and the cleaning performance of the system would be further improved in the low-gravity environment of the Moon. This technology is expected to increase the reliability of equipment used in long-term manned and unmanned activities on the lunar surface.     

Copper‐Catalyzed Ritter‐Type Reaction of Unactivated Alkenes with Dichloramine‐T

It was shown that dichloramine‐T ( 1 ) reacted with cyclohexene in acetonitrile to give N¹‐(2‐chlorocyclohexyl) amidine 2a and N‐(2‐chlorocyclohexyl)acetamide ( 3 ) via the competitive addition of acetonitrile and N‐chloro‐N‐tosylamino anion to cyclohexenechloronium ion. This reaction can be catalyzed by Cu(OAc)₂, primarily affording 2a . Furthermore, the resulting 2a can be cyclized to benzimidazol 14a in good yield by treating with KOH in dioxane.     

Cyclic flow-injection analysis for the repetitive determination of zinc with 2-(5-bromo-2-pyridylazo)-5-[N-n-propyl-N-(3-sulfopropyl)amino]phenol and EDTA.

A circulatory flow-injection method (cyclic FIA) for the repetitive determination of zinc has been proposed. The procedure involves the use of 2-(5-bromo-2-pyridylazo)-5-[N-n-propyl-N-(3-sulfopropyl)amino]phenol (5-Br-PAPS) together with EDTA as a reagent carrier solution, which is recycled in a single-line flow system via a reservoir. The formed 5-Br-PAPS-Zn(II) complex was measured spectrophotometrically at 552 nm, and the signal intensity corresponded to the zinc concentration. After passing through a flow-through cell, the carrier stream then returned to the reservoir, and the main reagent, 5-Br-PAPS, was successfully regenerated by a ligand-exchange reaction with EDTA, allowing the repetitive determination of zinc. The calibration curve for zinc was linear in the concentration range from 0.4 to 10.0 mg dm(-3) with a correlation coefficient of 0.9995 (n = 6). The detection limit of this method was 0.02 mg dm(-3) (S/N= 3). This method allowed as many as 300 repetitive determinations of 2.0 mg dm(-3) zinc solution with only 100 cm3 of the circulating carrier solution, providing a reduction in the consumption of reagents and an elimination of waste, an important approach towards clean chemistry.     

Effect of Ca2+/Sr2+ substitution on the electronic structure of the oxygen-evolving complex of photosystem II: a combined multifrequency EPR, 55Mn-ENDOR, and DFT study of the S2 state

The electronic structures of the native Mn(4)O(x)Ca cluster and the biosynthetically substituted Mn(4)O(x)Sr cluster of the oxygen evolving complex (OEC) of photosystem II (PSII) core complexes isolated from Thermosynechococcus elongatus, poised in the S(2) state, were studied by X- and Q-band CW-EPR and by pulsed Q-band (55)Mn-ENDOR spectroscopy. Both wild type and tyrosine D less mutants grown photoautotrophically in either CaCl(2) or SrCl(2) containing media were measured. The obtained CW-EPR spectra of the S(2) state displayed the characteristic, clearly noticeable differences in the hyperfine pattern of the multiline EPR signal [Boussac et al. J. Biol. Chem.2004, 279, 22809-22819]. In sharp contrast, the manganese ((55)Mn) ENDOR spectra of the Ca and Sr forms of the OEC were remarkably similar. Multifrequency simulations of the X- and Q-band CW-EPR and (55)Mn-pulsed ENDOR spectra using the Spin Hamiltonian formalism were performed to investigate this surprising result. It is shown that (i) all four manganese ions contribute to the (55)Mn-ENDOR spectra; (ii) only small changes are seen in the fitted isotropic hyperfine values for the Ca(2+) and Sr(2+) containing OEC, suggesting that there is no change in the overall spin distribution (electronic coupling scheme) upon Ca(2+)/Sr(2+) substitution; (iii) the changes in the CW-EPR hyperfine pattern can be explained by a small decrease in the anisotropy of at least two hyperfine tensors. It is proposed that modifications at the Ca(2+) site may modulate the fine structure tensor of the Mn(III) ion. DFT calculations support the above conclusions. Our data analysis also provides strong support for the notion that in the S(2) state the coordination of the Mn(III) ion is square-pyramidal (5-coordinate) or octahedral (6-coordinate) with tetragonal elongation. In addition, it is shown that only one of the currently published OEC models, the Siegbahn structure [Siegbahn, P. E. M. Acc. Chem. Res.2009, 42, 1871-1880, Pantazis, D. A. et al. Phys. Chem. Chem. Phys.2009, 11, 6788-6798], is consistent with all data presented here. These results provide important information for the structure of the OEC and the water-splitting mechanism. In particular, the 5-coordinate Mn(III) is a potential site for substrate 'water' (H(2)O, OH(-)) binding. Its location within the cuboidal structural unit, as opposed to the external 'dangler' position, may have important consequences for the mechanism of O-O bond formation.     

Synthesis of the ABC ring system of Jiadifenin via Pd-catalyzed cyclizations

An efficient route toward the central ABC system of jiadifenin has been developed using two key Pd-catalyzed cyclizations. A protic solvent-activated Mizoroki-Heck reaction was used to construct the C(9) quaternary carbon and the A ring. A cascading Tsuji-Trost cyclization/lactonization sequence was employed to establish the BC ring system and the C(5,6) stereochemistry.     

Hydrodynamic Characterization of Nickel Metal Foam,Part 2: Effects of Pore Structure and Permeability

In this article, the structural characterization of chemical vapor deposition (CVD) nickel metal foam is presented. Scanning electron microscope and post image processing were used to carefully analyze the surface of the nickel metal foams. Data on foam unit cell, ligament thickness, projected pore diameter, and averaged porosity was obtained. Unit cell and projected pore diameters of CVD nickel metal foam possess Gaussian-like distribution. Characteristics of pore structure and its effect on permeability in Darcian flow regime were analyzed. The relations between the permeability, pore size, and porosity are presented. Present and previous data are compared with these relations. Measurement results indicate that the permeability or the viscous conductivity of the CVD processed metal foam is affected not only by the pore size, and porosity but also by the ligament structure.     

Indirect conductimetric detection of nonelectrolytes in microcolumn liquid chromatography

Summary Indirect conductimetric detection of nonelectrolytes was investigated in microcolumn liquid chromatography. The mobile phase contained an electrolytic substance which maintained a high background and analytes were indirectly detected owing to a depression of the background signal. The dynamic reserve, defined as the ratio of the background to its noise level, was 9.3×10⁴, and the detection limits at S/N=3 were 10–32 ng for alcohols examined.     

Crystal structure of acetyl 29-methyl-29-methylidene-D:C-friedoolean-8-en-3beta-ol.

Acetyl 29-methyl-29-methylidene-D:C-friedoolean-8-en-3beta-o1 (2), derived from bryonolic acid (D:C-friedoolean-8-en-3beta-ol-29-oic acid) (1), was crystallographically analyzed. Rings A-E of 2 adopted chair, half-chair, half-chair, boat (with bow and stern at C-13 and C-16), boat (with bow and stem at C-19 and C-22) conformations, respectively. Good agreement was found between the structures from X-ray crystallography and that from MM2 calculations.