Surface films and metallurgy related to lubrication and wear

The nature of the tribological surface is identified and characterized with respect to adhesion, friction, wear, and lubricating properties. Surface analysis is used to identify the role of environmental constituents on tribological behavior. The effect of solid to solid interactions for metals in contact with metals, ceramics, semiconductors, carbons, and polymers is discussed. The data presented indicate that the tribological surface is markedly different than an ideal solid surface. The environment is shown to affect strongly the behavior of two solids in contact. In certain instances, the environment can dominate surface characteristics. With metals in contact with metals, adhesion is found to be related to the cohesive binding energy. Strong adhesive bonding occurs for metals in contact with ceramics, semiconductors, carbons, and polymers. Bond strength at the interface is, with some exceptions, stronger than the bond strength of the cohesively weaker of the two materials. Many different surface properties of metals and alloys influence tribological performance. These include (1) surface energy, (2) crystallographic orientation, (3) amorphous versus the crystalline state, (4) grain boundaries, (5) texturing of the surface, (6) crystal structure, and (7) order-disorder transformations. At sufficiently high loads or sliding velocities, metals or alloy surfaces are shown to undergo recrystallization effecting tribological properties. The chemical valency, d-valence-bond characteristics, of metal surfaces affect adhesion, friction, and wear. The greater the percent d-bond character, the lower the friction and wear. The ideal tensile and shear strengths of simple transition metals correlate with friction coefficients. Results presented also show that small amounts of alloying elements in base metals can alter markedly adhesion, friction, and wear by segregating to the solid surface.     

Reactions of Charged Substrates. 4. The Gas-Phase Dissociation of (4-Substituted benzyl)dimethylsulfoniums and -pyridiniums

The relative rates for the gas-phase dissociation RX(+) --> R(+) + X degrees of five (4-Y-substituted benzyl)dimethysulfoniums (Y = MeO, Me, H, Cl, and NO(2)) and 24 (4-Y-substituted benzyl)-3'-Z-pyridiniums (complete series for Z = CN, Cl, CONH(2), and H, and 4-methoxy- and 4-nitrobenzyls for Z = F and CH(3)CO) were measured using liquid secondary ion mass spectrometry. The Hammett plot (vs deltaDeltaG degrees or sigma(+)) is linear for the sulfoniums, but plots for the four pyridinium series have a drastic break between the 4-Cl and 4-NO(2) substrates. Br?nsted-like plots for the pyridiniums show a strong leaving group effect only for 4-nitrobenzyls. An analysis of these linear free energy relations with supporting evidence from semiempirical computations suggests that collisionally activated pyridinium substrates dissociate by two pathways, direct dissociation and through an ion-neutral complex intermediate. Comparison of these results with results for the solution reactions of some of these compounds shows that the mechanism is different in the gas and solution phases. Sufficient experimental data are not available to assign a mechanism for dissociation to the sulfonium series, but computational results show characteristics of a direct dissociative mechanism.     

The photodegradation of cadmium yellow paints in Henri Matisse’s Le Bonheur de vivre (1905–1906)

Evidence for the alteration of the yellow paints in Henri Matisse’s Le Bonheur de vivre (1905–1906, The Barnes Foundation) has been observed since the 1990s. The changes in this iconic work of Matisse’s Fauvist period include lightening, darkening, and flaking of the yellow paints. Handheld X-ray fluorescence (XRF) and multispectral imaging surveys reveal that the degradation is confined to cadmium yellow (CdS) paints. The discoloration of cadmium yellow paints in Impressionist, Post-Impressionist and early modernist work from the 1880s through the 1920s has been ascribed to the photo-oxidative degradation of CdS. Preliminary investigations of the degraded yellow paints in this work involved Cd L_III-edge X-ray Absorption Near Edge Spectroscopy (XANES) at the Stanford Synchrotron Radiation Light Source (SSRL Menlo Park, California) and Scanning Electron Microscopy-energy dispersive X-ray analysis (SEM-EDS) at the Winterthur Museum Scientific Research and Analysis Laboratory. To determine if the visual changes in the paints did in fact indicate photo-oxidative degradation and if different chemistries could be observed for the lightened versus darkened regions, synchrotron radiation-micro Fourier Transform InfraRed (SR-μFTIR) spectroscopy, X-ray Fluorescence (SR-μXRF) mapping and micro X-ray Absorption Near Edge Spectroscopy (μXANES) mapping at the Cd L_III-edge of the altered paint cross-sections were carried out at the European synchrotron radiation facility (ESRF, Grenoble, France) beamline ID-21. The goal is to elucidate the discoloration mechanisms observed in the paint using elemental and speciation mapping. The μXANES mapping and SR-FTIR imaging showed a substantial enrichment of CdCO₃ in the off-white surface crust of the faded/discolored CdS paint. This suggests that the CdCO₃ is present as an insoluble photodegradation product rather than solely a paint filler or starting reagent. Additionally, oxalates and sulfates were found to be concentrated at the alteration surface.     

Self-similar evolution of parabolic pulses in a laser

Self-similar propagation of ultrashort, parabolic pulses in a laser resonator is observed theoretically and experimentally. This constitutes a new type of pulse shaping in mode-locked lasers: in contrast to the well-known static (solitonlike) and breathing (dispersion-managed soliton) pulse evolutions, asymptotic solutions to the nonlinear wave equation that governs pulse propagation in most of the laser cavity are observed. Stable self-similar pulses exist with energies much greater than can be tolerated in solitonlike pulse shaping, and this has implications for practical lasers.     

Persistence in financial markets

Persistence is studied in a financial context by mapping the time evolution of the values of the shares quoted on the London Financial Times Stock Exchange 100 index (FTSE 100) onto Ising spins. By following the time dependence of the spins, we find evidence for power law decay of the proportion of shares that remain either above or below their 'starting' values. As a result, we estimate a persistence exponent for the underlying financial market to be θ_f∼0.5.     

How can we test the neutrino mass seesaw mechanism experimentally?

The seesaw mechanism for the small neutrino mass has been a popular paradigm, yet it has been believed that there is no way to test it experimentally. We present a conceivable outcome from future experiments that would convince us of the seesaw mechanism. It would involve data from the CERN Large Hadron Collider, International Linear Collider, cosmology, underground, and low-energy flavor experiments to establish the case.     

Time-stretch oscilloscope with dual-channel differential detection front end for monitoring of 100 Gb/s return-to-zero differential quadrature phase-shift keying data

Optical performance monitoring of high-capacity networks is one of the enabling technologies of future reconfigurable optical switch networks. In such networks, rapid performance evaluation of data streams becomes challenging due to the use of advanced modulation formats and high data rates. The time-stretch enhanced recording oscilloscope offers a potential solution to monitoring high-rate data in a practical time scale. Here we demonstrate an architecture with a differential detection front end for simultaneous I/Q data monitoring of a 100 gigabits/s return-to-zero differential quadrature phase-shift keying signal. This demonstration shows the potential of this technology for rapid performance monitoring of high-rate optical data streams that employ advanced modulation formats.     

ColliderBit: a GAMBIT module for the calculation of high-energy collider observables and likelihoods

We describe ColliderBit, a new code for the calculation of high energy collider observables in theories of physics beyond the Standard Model (BSM). ColliderBit features a generic interface to BSM models, a unique parallelised Monte Carlo event generation scheme suitable for large-scale supercomputer applications, and a number of LHC analyses, covering a reasonable range of the BSM signatures currently sought by ATLAS and CMS. ColliderBit also calculates likelihoods for Higgs sector observables, and LEP searches for BSM particles. These features are provided by a combination of new code unique to ColliderBit, and interfaces to existing state-of-the-art public codes. ColliderBit is both an important part of the GAMBIT framework for BSM inference, and a standalone tool for efficiently applying collider constraints to theories of new physics.