Atmospheric aerosol limb scanning based on the lunar eclipses photometry

The work is devoted to the analysis of the surface photometric observations of two total lunar eclipses in 2004. The lunar surface relative brightness distribution inside the umbra was used to retrieve the vertical distribution of aerosol extinction of the solar radiation expanding by a tangent path and its dependence on the location at the limb of the Earth. The upper altitude of troposphere aerosol layer was estimated for different latitude zones. The correlation between additional aerosol extinction in the upper troposphere and cyclones was investigated.     

Combined confocal and magnetic resonance microscopy

Confocal fluorescence optical microscopy and magnetic resonance microscopy are each used to study live cells in a minimally invasive way. Both techniques provide complementary information. Therefore, by examining cells simultaneously with both methodologies, more detailed information is obtained than is possible with each microscope individually. In this paper two configurations of a combined confocal and magnetic resonance microscope are described. The first configuration is capable of studying large single cells or three-dimensional cell agglomerates, whereas the second configuration is designed for the investigation of monolayers of mammalian cells. In both cases the sample compartment is part of a temperature regulated perfusion system. Images obtained with the combined system are shown forXenopus laevis oocytes, model JB6 tumor spheroids, and a single layer of Chinese hamster ovary cells. Finally, potential applications of the combined microscope are discussed.     

Imaging in turbid media with intensity-modulated lasers

We describe the formation of a narrow beam for intensity-modulated electromagnetic radiation propagating through highly scattering materials. We propose to use this beam to reconstruct images, similar to X-ray back-projection techniques. For sufficiently high modulation frequency, the photon density wave is primarily carried by photons that suffer small or no large-angle scattering, which gives rise to the beam’s narrow divergence. The beam-narrowing concept is supported by large-scale numerical simulations to examine the quality of the imaging.     

Enhancing molecular formation in a Rb-MOT

In this paper, we report observation of an enhancement of the ground state molecule Rb₂ formation in a Rb magneto-optical trap due to a photoassociation laser. Such an enhancement effect is due to flux enhancement of atomic pairs at short internuclear distances. Our experimental observations consist in the measurement of the molecular formation rate constant due to a probe laser as a function of the trap laser intensity. The results are compared with a simple semi-classical model, showing good agreement. We conclude that the production of cold Rb₂ may be enhanced using appropriate laser parameters; this may be useful for future experiments involving production and trapping of ultracold ground state molecules.     

Propagation of Electromagnetic Pulses in an Inhomogeneous Scattering Absorbing Medium. Invariant Temporal Properties

We present analytical solutions of the Ishimaru parabolic equation for the coherence function of electromagnetic field. The equation describes the temporal properties of the pulse at the output of an inhomogeneous dissipative scattering medium. An explicit expression for the Green's function of the problem is found. It is shown that the temporal part of the Green's function has an invariant Laguerre form. Numerical results describing the shapes of the studied temporal pulses at the output of the pass interval of the medium are also given. Time scales characterizing the shapes of the Laguerre output pulses are proposed and the influence of the parameters of the medium on the properties of the resulting pulses is analyzed.     

Approximate and Exact Small Signal Analysis for Single-Mode Fiber Near Zero Dispersion Wavelength with Higher Order Dispersion

This article presents the comparison of approximate and exact small-signal theories for analyzing the influence of the higher-order dispersion terms on dispersive optical communication systems operating near zero dispersion wavelength for linear single-mode fiber. For the approximate theory, the generalized conversion matrix has been reported and gives the transfer function of intensity and phase from the fiber input to fiber output for a laser source including the influence of any higher-order dispersion term. In addition, expressions for the small-signal frequency response and the relative intensity noise (RIN) response of an ultrafast laser diode including noises are derived. However, it is observed that the approximation assumed for the second-order dispersion term for the approximate analysis is not valid. From the approximate theory, the exact generalized conversion matrix and exact expressions for small-signal frequency response and relative intensity noise (RIN) are obtained. We show that for the exact theory, the second-order dispersion term has no effect on intensity and frequency response even at large modulating frequencies and large propagation distances contrary to the approximate theory as reported by other authors. But we show that third-order dispersion term certainly has some minute impact on the frequency and RIN response for long distance links at high modulating frequencies.     

The effect of microscopic features upon the transmissivity of enclosed laser ablated laminated metallised polymer films

A vacuum-deposited aluminium layer (20 nm) is sandwiched between two layers of laminated oriented polypropylene (OPP) film whose thickness varies from 20 to 40 μm. Selected areas of this sealed system were transparentised by the redistribution of the aluminium layer without breaking the seal or causing damage to the OPP film using a 75 W Q-switched Nd:YAG laser. The resultant transparentised films contain aluminium particles, distorted polymer areas and intact areas of the vacuum-coated aluminium layer. This paper investigates the effect of microscopic features upon the overall transmissivity of the laser-treated films and hence the quality of the transparentisation process.     

ACTIVE CONTROL OF ENVIRONMENTAL NOISE, VII: PERFORMANCE OF MULTI-FREQUENCY, MULTI-CHANNEL, FREEFIELD SOUND CANCELLING SYSTEMS

The paper considers the performance of multi-frequency, multi-channel, free field sound cancelling systems for the reduction of discrete frequency and periodic noise. The approach uses a method of directional active noise control. Large sound reductions from these systems have been made possible through: (a) synthetically generating the cancelling sound and synchronizing with the primary source; (b) automatic alignment of all stability regions of the control system and; (c) avoiding instability produced by these multi-channel systems.     

EFFECT OF SEATING ON EXPOSURES TO WHOLE-BODY VIBRATION IN VEHICLES

The vibration isolation efficiency of seating has been evaluated in 100 work vehicles in 14 categories (cars, vans, lift trucks, lorries, tractors, buses, dumpers, excavators, helicopters, armoured vehicles, mobile cranes, grass rollers, mowers and milk floats). Seat isolation efficiency, expressed by the SEAT value, was determined for all seats (67 conventional seats and 33 suspension seats) from the vertical acceleration measured on the floors and on the seats of the vehicles.For most categories of vehicle, the average SEAT value was less than 100%, indicating that the average seat provided some attenuation of vibration. However, there were large variations in SEAT values between vehicles within categories. Two alternative vibration frequency weightings (W_b from BS 6841, 1987; W_k from ISO 2631, 1997) yielded SEAT values that differed by less than 6%. Overall, the SEAT values determined by two alternative methods (the ratio of r.m.s. values and the ratio of vibration dose values) differed by less than 4·5% when using weighting W_b, although larger differences may be expected in some situations. The median SEAT value for the suspension seats was 84·6%; the median SEAT value for the conventional seats was 86·9% (based on weighting W_b and the ratio of r.m.s. values).Predicted SEAT values were obtained assuming that each seat could be interchanged between vehicles without altering its transmissibility. The calculations suggest that 94% of the vehicles investigated might benefit from changing the current seat to a seat from one of the other vehicles investigated. Although the predictions are based on assumptions that will not always apply, it is concluded that the severity of whole-body vibration exposures in many work environments can be lessened by improvements to seating dynamics.     

Swelling of cross-linked polyelectrolyte gels

The European Physical Journal E - A model of a cross-linked polyelectrolyte gel has been examined using Monte Carlo simulations. The simple model contained a charged defect-free network represented...