2-Metylthiazolium salts as 1,4-dinucleophiles. Thiazolo[3,2-a]pyridinium salts from westphal condensation

Condensation of 2-methylthiazoliura salts with 1,2-dicarbonyls in the presence of base, yielded thiazolo-[3,2-a]pyridinium derivatives. Results with different substrates are discussed.     

Determination of carbendazim, thiabendazole and fuberidazole using a net analyte signal-based method

The net analyte signal (NAS)-based method HLA/GO, modification of the original hybrid linear analysis (HLA) method, has been used to determine carbendazim, fuberidazole and thiabendazole in water samples. This approach was used after a solid-phase extraction (SPE) step, using the native fluorescence emission spectra of real samples, previously standardized by piecewise direct standardization (PDS). The results obtained show that the modification of HLA performs in a similar way that partial least-squares method (PLS-1). The NAS concept was also used to calculate multivariate analytical figures of merit such as limit of detection, selectivity, sensitivity and analytical sensitivity (γ⁻¹). With this purpose, blanks of methanol and ternary mixtures, with the target analyte at low concentration and the other two ranging according to the calibration matrix, were used, with different results. Detection limits calculated in the last way are more realistic and show the influence of the other components in the sample. Selectivity for carbendazim is higher than the corresponding values for fuberidazole and thiabendazole, whereas sensitivity, as well as the values obtained for their detection limits, are lower for carbendazim, followed by thiabendazole and fuberidazole. Results obtained by modification of HLA vary in the same way that the ones obtained by PLS-1.     

Cross-sections of spectrochromatograms for the resolution of overlapping peaks in diode-array high-performance liquid-chromatography

Multi-wavelength detectors offer improved detection capabilities for liquid chromatographic methods, but require multivariate approaches to utilise all the available information. The photodiode-array detector in high-performance liquid chromatography (HPLC) generates a three-dimensional data matrix, which is conventionally presented as an isometric projection or a contour plot. In this work, a new graphical technique is described for improving the quantitative results obtained from HPLC, using the available spectrochromatographic information in both the time and wavelength domains. The technique consists of performing cross-sections through the data matrix to obtain the maximum analytical information for each of the analytes. Hence, the resolution of overlapping peaks and the sensitivity in the determination are optimised. In order to demonstrate the validity and simplicity of the approach, the method has been applied to the resolution of synthetic mixtures of iprodione, procymidone and chlorothalonil. Also, the method has been satisfactorily applied to the simultaneous determination of the pesticides in environmental groundwater samples.     

Application of GRAM and TLD to the resolution and quantitation of real complex multicomponent mixtures by fluorescence spectroscopy

The application of the generalised rank annihilation method (GRAM) and the trilinear decomposition (TLD) method to the resolution and quantitation of fluorescence excitation-emission matrices of a ternary mixture of pesticides, carbendazim, fuberidazole, and thiabendazole, with overlapped spectra is described. The results obtained with both methods are compared and evaluated using measures of similarity (correlation coefficients) between the real and estimated spectra. Both approaches have been tested using augmented data matrices containing only two samples, but none of these methods succeeded completely in resolution of the system. When TLD was applied to augmented data matrices containing more than two samples better performance was achieved. To illustrate the application of both algorithms to real samples, they were used in the analysis of water samples containing the target pesticides. Again, TLD had an advantage over GRAM because the ability to analyse data from multiple (more than two) samples simultaneously allowed the resolution of the mixtures.     

Correction of predicted concentration in the use of solvent-based calibration lines for determining carbendazim, fuberidazole and thiabendazole in water after a SPE step

This paper addresses an attempt to overcome the deviation that results from the use of a solid phase extraction (SPE) procedure for extracting trace levels of three benzimidazole pesticides (carbendazim, fuberidazole and thiabendazole) from water samples, for their subsequent quantitative determination by spectrofluorimetry, using univariate calibration. The deviation is due to an attenuation effect originating in the C(18) cartridge used in the SPE step. The approach developed is based on the calculation of a correction factor (fc) that is dependent on the signal measured after the SPE step. In order to calculate fc a study of the intermediate precision of two calibration graphs (with and without SPE) was performed. The fc was added to the predicted concentrations for the analytes using a calibration graph for pure solvent, built every time that the analysis is done. In addition, predictions were made using both average calibration graphs obtained from the intermediate precision study. In this study, the first of these three options was shown to improve the accuracy of predictions in the presence of matrix effects.     

Multivariate curve resolution modeling of liquid chromatography-mass spectrometry data in a comparative study of the different endogenous metabolites behavior in two tomato cultivars treated with carbofuran pesticide

A metabonomic study based on the application of multivariate curve resolution and alternating least squares (MCR-ALS) to three-way data sets obtained by liquid chromatography coupled to mass spectrometry detection (LC-MS) was carried out for Rambo and Raf tomato cultivars treated with carbofuran pesticide. Samples were picked up during a 21 days period after treatment and analyzed by LC-MS in scan mode, along with the corresponding blank samples. Then, MCR-ALS was applied to the three-way data sets using column wise augmented matrices, and the evolutionary profiles as a function of the time after treatment were estimated for the metabolites present in both cultivars, as well as their corresponding pure spectra estimations. A comparative study using those estimations showed that some of these metabolites followed different behavior for the different cultivars after treatment. Since all treated and untreated Rambo and Raf samples were picked up according to the same sampling protocol and in a similar state of maturation, any difference in the behavior between profiles can be interpreted as an effect due to the presence of pesticide and to the kind of cultivar. Based on this hypothesis, several PLS-DA approaches were tested to check if it would be possible to classify samples by using the metabolites MCR estimations. Results showed that PLS-DA models for classification of treated or non-treated (blank) samples were the best ones obtained (98.44% of correct classifications for the validation set), which supports the stress effects related to carbofuran treatment. In addition, excellent discrimination among the four groups could be attained (89.06% of correct classifications for the validation set).     

Online trace enrichment to determine pyrethroids in river water by HPLC with column switching and photochemical induced fluorescence detection

The potential of online trace enrichment on a highly apolar short column in LC was evaluated for the determination of pyrethroids in river water. Twelve millilitres of water samples, modified with 8 mL ACN (ACN/water 40:60, v/v), were passed through 50 x 4.6 mm ID first separation column packed with 5 microm Hypersil Elite C18. Pesticides were preconcentrated in this column while the matrix background was eluted to waste. Separation of pesticides was performed on a 3.5 microm symmetric C18 column (250 x 4.6 mm ID) with an ACN step gradient as mobile phase and fluorescence detection was used after postcolumn derivatization by using UV light. The use of photochemically induced fluorescence for detection improved sensitivity and selectivity. Quantification limits ranged from 0.05 to 0.1 microg/L and pesticide recoveries at two concentration levels (0.1 and 0.5 microg/L) were between 93.1 and 118.6%, with RSD between 2.5 and 7.5% (n = 3) in river water samples. No matrix effect was detected.     

Pressure dependence of the Néel temperature in CeMg and CeZn

Magnetization measurements have been carried out under hydrostatic pressures up to 6 kbar and constant magnetic fields (10 kOe) in CsCl-type compounds: CeMg and CeZn. a decrease in the Néel temperature, T_N, with increasing pressure is observed in both compounds (dT_N/dp=- 0.2 and -0.17 K kbar^-1 respectively in CeMg and CeZn). The relative decrease of T_N has a similar order of magnitude to that found in other cerium compounds with Kondo-type properties.     

Magnetic interactions and crystal field in RMg3 compounds (R = Ce,Pr, Nd)

We have carried out a study of magnetic properties, electrical resistivity and of crystal field excitations using inelastic neutron scattering, in cubic RMg₃ compounds with light rare earths R = Ce, Pr and Nd. The ground states are the Γ₇ and Γ₆ doublets for CeMg₃ and NdMg₃, which order at 3.5 and 6.5 K, respectively. PrMg₃ has the non-magnetic Γ₃ ground state and remains a Van Vleck paramagnet. The magnetic contribution to the resistivity has been separated. It allows us to evaluate the couplings between the 4f shell and the conduction band which is much larger for CeMg₃ than for the other compounds. The coupling constant Γ is negative in this case, as shown by an incipient Kondo effect in this compound.     

Determination of photoirradiated high polar benzoylureas in tomato by HPLC with luminol chemiluminescence detection

This study reports the first analytical application of luminol chemiluminescence reaction for the sensitive detection of two benzoylurea insecticides (diflubenzuron and triflumuron). Off-line experiments demonstrated that previously irradiated traces of these benzoylurea insecticides largely enhanced the chemiluminescence emission yielded from the oxidation of luminol in methanol:water mixtures, by potassium permanganate in alkaline medium, the enhancement being proportional to the concentration of both pesticides. The two benzoylureas were determined in tomato samples by coupling liquid chromatography with post-column photoderivatization and detection based on this chemiluminescence reaction. Tomato samples were extracted using the QuEChERS method based on extraction with acetonitrile and dispersive solid-phase clean-up using primary and secondary amine (PSA). Interferences due to matrix effect were overcome by using matrix-matched standards. The optimised method was validated with respect to linearity, limits of detection and quantification, precision and accuracy. Under the optimised conditions, calibrations graphs were linear between 0.05 and 0.50 μg mL⁻¹ for diflubenzuron and between 0.10 and 1.00 μg mL⁻¹ for triflumuron. Method detection limits were 0.0025 and 0.0131 μg mL⁻¹ (equivalent to 0.0005 and 0.0026 mg kg⁻¹) and quantification limits were 0.05 and 0.10 μg mL⁻¹ (equivalent to 0.01 and 0.02 mg kg⁻¹) for diflubenzuron and triflumuron, respectively. In both cases, quantification limits were lower than the maximum residue levels (MRLs) established by the European legislation. The relative standard deviation of intra-day precision was below 10% and recoveries were between 79.7% and 94.2% for both pesticides.