Grid‐free surface vorticity method applied to flow induced vibration of flexible cylinders

In order to study cross flow induced vibration of heat exchanger tube bundles, a new fluid–structure interaction model based on surface vorticity method is proposed. With this model, the vibration of a flexible cylinder is simulated at Re=2.67 × 10⁴, the computational results of the cylinder response, the fluid force, the vibration frequency, and the vorticity map are presented. The numerical results reproduce the amplitude‐limiting and non‐linear (lock‐in) characteristics of flow‐induced vibration. The maximum vibration amplitude as well as its corresponding lock‐in frequency is in good agreement with experimental results. The amplitude of vibration can be as high as 0.88D for the case investigated. As vibration amplitude increases, the amplitude of the lift force also increases. With enhancement of vibration amplitude, the vortex pattern in the near wake changes significantly. This fluid–structure interaction model is further applied to simulate flow‐induced vibration of two tandem cylinders and two side‐by‐side cylinders at similar Reynolds number. Promising and reasonable results and predictions are obtained. It is hopeful that with this relatively simple and computer time saving method, flow induced vibration of a large number of flexible tube bundles can be successfully simulated. Copyright © 2004 John Wiley & Sons, Ltd.     

Damage and fracture evaluation of granular composite materials by digital image correlation method

This paper presents the applications of digital image correlation technique to the mesoscopic damage and fracture study of some granular based composite materials including steelfiber reinforced concrete, sandstone and crystal-polymer composite. The deformation fields of the composite materials resulted from stress localization were obtained by the correlation computation of the surface images with loading steps and thus the related damage prediction and fracture parameters were evaluated. The correlation searching could be performed either directly based on the gray levels of the digital images or from the wavelet transform (WT) coefficients of the transform spectrum. The latter was developed by the authors and showed higher resolution and sensitivity to the singularity detection. Because the displacement components came from the rough surfaces of the composite materials without any coats of gratings or fringes of optical interferometry, both surface profiles and the deformation fields of the composites were visualized which was helpful to compare each other to analyze the damage of those heterogeneous materials. The project supported by the National Natural Science Foundation of China (10125211 and 10072002), the Scientific Committee of Yunnan Province for the Program of Steel Fiber Reinforced Concrete, and the Institute of Chemical Materials, CAEP at Mianyang     

Model based online diagnosis of unbalance and transverse fatigue crack in rotor systems

A model based technique for online identification of malfunctions in rotor systems is discussed. Presence of fault changes the dynamic behavior of the system. This change is taken into account by equivalent loads acting on the undamaged system model. Equivalent loads are fictitious forces and moments acting on the undamaged system model, which generate a dynamic behavior identical to that of the real damaged system. The mathematical representation of equivalent loads is referred to as Fault Model. The work focuses on developing a fault model for a transverse fatigue crack in shaft and testing it through simulated studies. The basic principle of the technique is validated for unbalance identification, through numerical simulations as well as by experiments on a real rotor system.     

Phase Measurement Algorithm in Wavelength Scanned Fizeau Interferometer

Wavelength scanned interferometry allows the simultaneous measurement of top surface shape and optical thickness variation of a transparent object consisting of several parallel surfaces. Interference signals from these surfaces can be separated in frequency space, and their phases are detected by discrete Fourier analysis. However, these signal frequencies are shifted from the detection frequency by the refractive index dispersion of the object and a nonlinearity of the wavelength scanning. The Fourier analysis is sensitive to the detuning of the signal frequency and suffers from the multiple-beam interference noise. Conventional error-compensating algorithms cannot be applied to an object consisting of more than three reflecting surfaces. We derive a new 2N-1 sample error-compensating algorithm, which allows the phase detection of any order of harmonic frequency among the interference signals. The new algorithm suppresses the effect of signal frequency detuning as well as the multiple-beam interference noise and can be applied to the measurement of complex objects consisting of more than three reflecting surfaces.     

The 7th Asian Symposium on Visualization

The 7th Asian Symposium on Visualization (7ASV) was successfully held in Singapore from 3^rd to 7^th November 2003. This event was originally scheduled from 26^th to 30^th May 2003, but had to be postponed because of the outbreak of SARS (Severe Acute Respiratory Syndrome) in some parts of the world. A total number of 122 participants attended the Symposium of which, 107 were foreign participants from 16 countries (excluding Singapore) worldwide. There were 104 papers covering broad range of topics presented at the Symposium which were delivered in 2×7 long sessions, and 9 keynote papers.     

The response of thermally and optically stimulated luminescence from Al2O3:C to high-energy heavy charged particles

The thermoluminescence (TL) and optically stimulated luminescence (OSL) response of Al₂O₃ dosimeters to high-energy heavy charged particles (HCP) has been studied using the heavy ion medical accelarator at Chiba, Japan. The samples were Al₂O₃ single-crystal chips, of the type usually known as TLD-500, and Luxel^TM dosimeters (Al₂O₃:C powder in plastic) from Landauer Inc. The samples were exposed to ⁴He (150 MeV/u), ¹²C (400 MeV/u), ²⁸Si (490 MeV/u) and ⁵⁶Fe (500 MeV/u) ions, with linear energy transfer values covering the range from 2.26 to 189 keV/μm in water and doses from 1 to 100 mGy (to water). A ⁹⁰Sr/⁹⁰Y beta source, calibrated against a ⁶⁰Co secondary standard, was used for calibration purposes. For OSL, we used both continuous-wave OSL measurements (CW-OSL, using green light stimulation at 525 nm) and pulsed OSL measurements (POSL, using 532 nm stimulation from a Nd:YAG Q-switched laser). The efficiencies (η_HCP,γ) of the different HCPs at producing OSL or TL were observed to depend not only upon the linear energy transfer (LET) of the HCP, but also upon the sample type (single crystal chip or Luxel^TM) and the luminescence method used to define the signal—i.e. TL, CW-OSL initial intensity, CW-OSL total area, or POSL. Observed changes in shape of the decay curve lead to potential methods for extracting LET information of unknown radiation fields. A discussion of the results is given, including the potential use of OSL from Al₂O₃ in the areas of space radiation dosimetry and radiation oncology.     

Modification of Spatial Coherence by Means of Low-Order Zernike-Mode Adaptive Optics

Spatial coherence of the field modified by low-order adaptive optics is analyzed to establish a theoretical basis for the recent idea of using adaptive optics as a spatial coherence modifier. In this context low-order adaptive optics has the ability to correct some of the low-order aberrations specified by Zernike polynomials. The initial field to be modified is assumed to be a spatially partially coherent one resulting from phase disturbance. It is demonstrated, as in the previous study, that low-order adaptive optics serves to enhance the spatial coherence of the resultant field and that the effect of the enhancement becomes stronger as the spatial coherence of the initially partially coherent field increases. Potential applications of low-order adaptive optics as a spatial coherence modifier are briefly discussed.     

Evolution of the high power THz source program at Jefferson Lab

We report the evolution of the high power THz source program at Jefferson Lab. The source is based on coherent synchrotron radiation in which short bunches of relativistic electrons radiate when traversing a dipolar magnetic field. In our first accelerator we produced 20 W of broadband THz light. Our upgraded accelerator with higher current and improved THz extraction optics will considerably enhance the output power to >100 W. In this paper we describe the source in some detail and present theoretical calculations for the upgrade.     

Special points for calculating integrals over the primitive cell of a periodic system

A method is proposed for constructing appropriate sets of special points in the Brillouin zone in which the extended unit cell method is used with a subsequent shift from the center of the reduced Brillouin zone. The proposed method offers several advantages over the commonly used Monkhorst-Pack method. The difference in the construction of sets of special points for the direct and reciprocal lattices is discussed for crystals belonging to a nonsymmorphic space group. The cases of a planar square lattice and an fcc lattice are considered to illustrate general results.     

New data on the ternary fission of 252Cf from the Gammasphere facility

Ternary fission of ²⁵²Cf was studied at Gammasphere using eight ΔE×E particle telescopes. Helium, beryllium, boron, and carbon light charged particles (LCPs) emitted with kinetic energy more than 9, 21, 26, and 32 MeV, respectively, were identified. The 3368-keV γ transition from the first 2⁺ excited state in ¹⁰Be was found and the population probability ratio N(2⁺)/N(0⁺) = 0.160 ± 0.025 was estimated. No evidence was found for 3368-keV γ rays emitted from a triple molecular state. For the first time, charge distributions are obtained for ternary fission fragments emitted with helium, beryllium, and carbon LCPs.