Compensation of second-order dispersion in femtosecond pulses after filamentation using volume holographic transmission gratings recorded in dichromated gelatin

We have designed and developed a pulse compressor with volume transmission holographic gratings to be implemented in post-compression experiments based on filamentation in gases. Pulse compression down to 13?fs has been demonstrated. The gratings have been recorded in commercial PFG-04 dichromated gelatin emulsions with a recording wavelength of 532?nm, attaining sufficient index modulation to achieve high efficiency when they are illuminated by an 800-nm laser.     

Physics of compaction of fine cohesive particles

Fluidized fractal clusters of fine particles display critical-like dynamics at the jamming transition, characterized by a power law relating consolidation stress with volume fraction increment [sigma--(c) proportional, variant(Deltaphi)(beta)]. At a critical stress clusters are disrupted and there is a crossover to a logarithmic law (Deltaphi = nu logsigma--(c)) resembling the phenomenology of soils. We measure lambda identical with- partial differentialDelta(1/phi)/ partial log(sigma--(c) proportional, variant Bo(0.2)(g), where Bo(g) is the ratio of interparticle attractive force (in the fluidlike regime) to particle weight. This law suggests that compaction is ruled by the internal packing structure of the jammed clusters at nearly zero consolidation.     

Adsorption of a multicomponent mixture of gases with multisite occupancy

In this paper, we present a study of the adsorption of multicomponent mixtures with multisite occupancy. The transfer-matrix technique is used to analyze the one-dimensional binary mixtures for interacting systems. A general expression for the characteristic polynomial is derived. Extension of the treatment to a higher dimension is also presented by using the mean-field Bragg-Williams approximation, transfer-matrix calculations, and Monte Carlo simulation. Partial and total isotherms are obtained for the dimer-trimer mixture where a different order appears.     

Refinement of modelled structures by knowledge-based energy profiles and secondary structure prediction: Application to the human procarboxypeptidase A2

Knowledge-based energy profiles combined with secondary structure prediction have been applied to molecular modelling refinement. To check the procedure, three different models of human procarboxypeptidase A2 (hPCPA2) have been built using the 3D structures of procarboxypeptidase A1 (pPCPA1) and bovine procarboxypeptidase A (bPCPA) as templates. The results of the refinement can be tested against the X-ray structure of hPCPA2 which has been recently determined. Regions miss-modelled in the activation segment of hPCPA2 were detected by means of pseudo-energies using Prosa II and modified afterwards according to the secondary structure prediction. Moreover, models obtained by automated methods as COMPOSER, MODELLER and distance restraints have also been compared, where it was found possible to find out the best model by means of pseudo-energies. Two general conclusions can be elicited from this work: (1) on a given set of putative models it is possible to distinguish among them the one closest to the crystallographic structure, and (2) within a given structure it is possible to find by means of pseudo-energies those regions that have been defectively modelled.     

Capillary electrophoresis of inorganic anions

This review deals with the separation mechanisms applied to the separation of inorganic anions by capillary electrophoresis (CE) techniques. It covers various CE techniques that are suitable for the separation and/or determination of inorganic anions in various matrices, including capillary zone electrophoresis, micellar electrokinetic chromatography, electrochromatography and capillary isotachophoresis. Detection and sample preparation techniques used in CE separations are also reviewed. An extensive part of this review deals with applications of CE techniques in various fields (environmental, food and plant materials, biological and biomedical, technical materials and industrial processes). Attention is paid to speciations of anions of arsenic, selenium, chromium, phosphorus, sulfur and halogen elements by CE.     

Sonication of chitin-glucan, preparation of water-soluble fractions and characterization by HPLC

A water-insoluble chitin-glucan complex, isolated from the mycelium of Aspergillus niger, was swollen in various aqueous media and treated subsequently by high-energy sonication. The concentration of the resulting water-soluble polysaccharide fractions was dependent on the swelling medium, the amount of the chitin-glucan complex in the suspension, and on the time of sonication. The yields of water-soluble chitin-glucan were within the range 13.6 to 24.4% relative to the mass of the original chitin-glucan. The nitrogen content obtained for the samples of water-soluble chitin-glucan indicated a higher content of chitin (3.45% of nitrogen in high-molecular fraction) than in the original water-insoluble chitin-glucan sample (1.8%). The distribution of the molecular weights of the water-soluble fractions prepared was determined by high-performance liquid chromatography.     

Enzyme‐Responsive Silica Mesoporous Supports Capped with Azopyridinium Salts for Controlled Delivery Applications

The preparation of a new capped silica mesoporous material, Rh‐Azo‐S , for on‐command delivery applications in the presence of target enzymes is described. The material consists of nanometric mesoporous MCM‐41‐like supports loaded with Rhodamine B and capped with an azopyridine derivative. The material was designed to show “zero delivery” and to display a cargo release in the presence of reductases and esterases, which are usually present in the colon, mainly due to intestinal microflora. The opening and cargo release of Rh‐Azo‐S in vitro studies were assessed and seen to occur in the presence of these enzymes, whereas no delivery was noted in the presence of pepsine. Moreover, Rh‐Azo‐S nanoparticles were used to study controlled Rhodamine B dye delivery in intracellular media. HeLa cells were employed for testing the “non”‐toxicity of nanoparticles. Moreover, delivery of the dye in these cells, through internalization and enzyme‐mediated gate opening, was confirmed by confocal microscopy. Furthermore, the nanoparticles capped with the Azo group and loaded with a cytotoxic camptothecin ( CPT ) were also prepared (solid CPT‐Azo‐S ) and used as delivery nanodevices in HeLa cells. When this solid was employed, the cell viability decreased significantly due to internalization of the nanoparticles and delivery of the cytotoxic agent.     

CZE study on adsorption processes of aliphatic and aromatic amines on PMMA chip

Adsorption processes on a PMMA chip linked with CZE separations of a group of 13 aliphatic and aromatic mono‐ and di‐amines were studied. Due to the lack of chromophores within aliphatic amines, contact conductivity detection implemented directly onto the chip was used for monitoring of cationic CZE separations. To prevent an adsorption of studied amines to the chip channels, the surface of PMMA chip was modified by dynamic coating. Different surface modifiers, such as aliphatic oligoamines (diethylenetriamine and triethylenetetramine), were added to the BGE solutions filling the chip channels. The effect of various concentrations of surface modifiers on peak profiles and separation parameters of amines was monitored. Of these, mainly, aliphatic di‐amines and aromatic mono‐amines adversely affected the CZE resolution of a whole group of analytes by their strong adsorption to the chip channels. A propionate BGE with pH 3.2 containing 100 μM triethylenetetramine and 25 mM 18‐crown‐6‐ether was found suitable for CZE resolution of 12 from a total of 13 amines studied. Simple dynamic modification of the surface of PMMA chip enabled fast (analysis time lasted 9 min), sensitive (sub‐μM LODs reached) and reproducible (1–3% RSD of the peak areas) CZE analysis of the aliphatic and aromatic amines.     

Relative acidities and structure analysis of cis and trans isomers of 1,5‐oxazaspiro[5.5] undecane derivatives by multinuclear magnetic resonance

The relative acidities of the cis and trans isomers of a series of 1,5‐oxazaspiro[5.5]undecane derivatives were determined by measuring ΔpK in acid‐base titrations followed by ¹ H NMR. Relative structural stabilities were determined by measuring substituent chemical shift and γ‐gauche effects in ¹³C, ¹⁵N, and ¹⁷O NMR. Crystallographic characterization of a model spiro[5.5]undecane is presented to support the basicity in solid state. Copyright © 2010 John Wiley & Sons, Ltd.     

Electrochemically Generated Nanoparticles of Halogen‐Bridged Mixed‐Valence Binuclear Metal Complex Chains

Spherical nanoparticles composed of MMX chains can be made by a polymerization strategy driven by electrochemical processes. In particular, the [Pt₂(MeCS₂)₄I₂] (MMI₂) dimetal subunit is employed as a monomer for the formation of [Pt₂(MeCS₂)₄I]_n spherical nanostructures on surfaces. We have paid particular attention to elucidating the general mechanism of the deposition process on the basis of in situ electrochemical measurements. The reduction of MMI₂ to give the electrodeposition of nanostructures agrees well with formation of the reduced [MMI₂]^? species followed by a disproportionation mechanism mediated by iodide anions. The chemical composition of the particles was determined by energy‐dispersive X‐ray spectroscopy (EDX) and X‐ray photoelectron spectroscopy (XPS) to reveal the MMI₂ polymer.