Low-temperature electrolytic coloration and spectral property of ammonium alum crystals

Ammonium alum crystals are colored electrolytically using a pointed cathode and a flat anode at low temperatures and under various voltages. SO₃^?, SO₂^? and O₃^? hole-trapped centers are produced in colored ammonium alum crystals. Characteristic absorption bands of SO₃^?, SO₂^? and O₃^? hole-trapped centers are observed in absorption spectra of colored ammonium alum crystals. Production and conversion of hole-trapped centers are explained. Current–time curves for electrolytic coloration of ammonium alum crystal and their relationship with electrolytic coloration process are given.     

Resonance modes in optical fibres

The weakly nonlinear boundary value problem of wave propagation in an optical fibere(for the transverse electric mode,for example)is formulated and a modified linear solution is obained.It is shown that a self-consistent theory of fibre optics should be weakly nonlinear,The mode of critical refraction that does not exist in the linear theory is obtained,showing that it is a mode consisting of resonance modes,It is shown that the signal carriers in a long fibre are of resonance modes,not normal modes,Some experimental data are given for comparison with the theoretical predictions and the agreement seems satisfactory.     

Elimination of surface scratch/texture on the surface of single crystal Si substrate in chemo-mechanical grinding (CMG) process

Si wafers are widely used as a substrate material for fabricating ICs. The quality of ICs depends on the quality of Si wafers. The chemo-mechanical grinding (CMG) with soft abrasive grinding wheels (SAGW) has been recently found to be a great potential process for machining Si wafers to generate superior surface quality at low cost. However, there have been very few studies on observing variation of topography of scratch/texture and understanding basic eliminating process of scratch/texture on the ground Si wafer. Furthermore, few reports on the variation of surface roughness and material removal rate (MRR) during CMG process and relationship between MRR and surface roughness during CMG process are presented. In this paper, a series of CMG experiments have been conducted to study the elimination process of artificial scratches created on etched Si surfaces and residual textures induced by SD1500 diamond wheel in CMG process, and to understand the topography variations of Si surfaces and some basic grinding characteristics during CMG process.     

Image registration based on matrix perturbation analysis using spectral graph

We present a novel perspective on characterizing the spectral correspondence between nodes of the weighted graph with application to image registration. It is based on matrix perturbation analysis on the spectral graph. The contribution may be divided into three parts. Firstly, the perturbation matrix is obtained by perturbing the matrix of graph model. Secondly, an orthogonal matrix is obtained based on an optimal parameter, which can better capture correspondence features. Thirdly, the optimal matching matrix is proposed by adjusting signs of orthogonal matrix for image registration. Experiments on both synthetic images and real-world images demonstrate the effectiveness and accuracy of the proposed method.     

Investigation of the local structure and the effects of the orbit reduction factor on the EPR g-factors for octahedral (CrO6) cluster in TiO2:Cr and MgO:Cr systems

A theoretical method for studying the inter-relation between electronic and molecular structure has been proposed based on the complete energy matrices for a d³ configuration ion in a tetragonal ligand-field. By means of this method, the local structure for Cr³⁺ ion doped in oxides TiO₂ (anatase) and MgO has been determined. The calculated results indicate that the local structure of the (CrO₆)⁹⁻ cluster in TiO₂:Cr³⁺ and MgO:Cr³⁺ systems exists as a compressed distortion relative to the regular octahedron. Meanwhile, the dependence of the EPR zero-field splitting parameter D on the local structure parameter ΔR (ΔR=R₁−R₂) has been revealed. In addition, the relation between the EPR g-factors (g,g,Δg) and the orbit reduction factor k has been discussed for the two systems, suggesting that the orbit reduction factor k is very important to understand the EPR g-factors.     

Bipartite entanglement of a two-qubit system with anisotropic couplings under nonuniform magnetic fields

This paper investigates bipartite entanglement of a two-qubit system with anisotropic couplings under an inhomogeneous magnetic field. This work is mainly to investigate the characteristics of a Heisenberg XYZ chain and obtains some meaningful results. By the concept of negativity, it finds that the inhomogeneity of magnetic field may induce entanglement and the critical magnetic field is independent of J_z. The inhomogeneous magnetic field can increase the value of critical magnetic field B_c. It also finds that the magnetic field not only suppresses the entanglement but also can induce it to revival for some time.     

High-lying excited states in <Superscript>10</Superscript>Be from the <Superscript>9</Superscript>Be(<Superscript>9</Superscript>Be,<Superscript>10</Superscript>Be)<Superscript>8</Superscript>Be reaction

A transfer-reaction experiment of ⁹Be(⁹Be, ¹⁰Be)⁸Be was performed at a beam energy of 45 MeV. Excited states in ¹⁰Be up to 18.80 MeV are produced using missing mass and invariant mass methods. Most of the observed high-lying resonant states, reconstructed from the α + ⁶He and t + ⁷Li decay channels, agree with the previously reported results. In addition, two new resonances at 15.6 and 18.8 MeV are identified from the present measurement. The 18.55 MeV state is found to decay into both the t + ⁷Li_g.s. and t + ⁷Li* (0.478 MeV) channels, with a relative branching ratio of 0.93 ± 0.33. Further theoretical investigations are encouraged to interpret this new information on cluster structure in neutron-rich light nuclei.     

Laser-induced changes in titanium by femtosecond,picosecond and millisecond laser ablation

In order to realize the qualitative control of the laser-induced changes trend and the quantitative control of the laser-induced changes range in titanium upon laser irradiation with different pulse duration, comparative ablation experiments by femtosecond, picosecond and millisecond pulsed lasers were carried out on titanium in this study. Then the final surface morphology, aspect ratio, chemical composition and microstructural state of the ablated titanium were analyzed by laser scanning confocal microscopy, X-ray photoelectron spectroscopy and transmission electron microscopy, respectively. The dependency of the morphology, size, composition and microstructure of ablated titanium on laser pulse duration variation were emphatically discussed. It is found that, as the laser pulse duration increases from femtosecond to millisecond scale, surface morphology quality of ablated titanium gets worse, aspect ratio of microgroove decreases, proportion of titanium oxides in final ablation products becomes larger and the microstructural state of ablated titanium has a higher amorphization degree, which can be attributed to the decreased laser intensity per pulse and enhanced heat conduction effect in titanium with the pulse duration increasing.