Direct single-layered fabrication of 3D concavo–convex patterns in nano-stereolithography

A nano-surfacing process (NSP) is proposed to directly fabricate three-dimensional (3D) concavo–convex-shaped microstructures such as micro-lens arrays using two-photon polymerization (TPP), a promising technique for fabricating arbitrary 3D highly functional micro-devices. In TPP, commonly utilized methods for fabricating complex 3D microstructures to date are based on a layer-by-layer accumulating technique employing two-dimensional sliced data derived from 3D computer-aided design data. As such, this approach requires much time and effort for precise fabrication. In this work, a novel single-layer exposure method is proposed in order to improve the fabricating efficiency for 3D concavo–convex-shaped microstructures. In the NSP, 3D microstructures are divided into 13 sub-regions horizontally with consideration of the heights. Those sub-regions are then expressed as 13 characteristic colors, after which a multi-voxel matrix (MVM) is composed with the characteristic colors. Voxels with various heights and diameters are generated to construct 3D structures using a MVM scanning method. Some 3D concavo–convex-shaped microstructures were fabricated to estimate the usefulness of the NSP, and the results show that it readily enables the fabrication of single-layered 3D microstructures. PACS 85.40.Hp; 81.16.Nd; 42.82.Cr     

关于Fuzzy聚类分析及其在脊髓灰质炎中的应用

本文用Fuzzy数学的观点探讨了Fuzzy聚类分析，并通过对脊髓灰质炎病毒抗体水平的Fuzzy聚类分析，获得了良好的聚类效果，为该项问题的研究提供了科学依据。     

The measurements of correlation times of molecules adsorbed on silica gel,alumina and charcoal using NOESY and MAS NMR

The correlation times (τ_c) and cross relaxation rates of toluene, dimethylformamide, tetrahydrofuran, water-acetone and water-dioxane adsorbed on silica gel, alumina and charcoal were obtained by measurements of the integrated intensities of cross and diagonal peaks in their NOESY spectra. The (τ_c) of the above mentioned systems is in the range of 10^?6?10^?9 s, much longer than that in the liquid (10^?12?10^?14 s). It was found that intramolecular rotation of toluene adsorbed on charcoal is slower than that on SiO₂, Al₂O₃ and the inversion of α and β protons in tetrahydrofuran is very fast (τ_c = 1.76×10^?9 s). The cross relaxation plays an important role in the relaxation of molecules adsorbed on solid surfaces with low electron densities.     

明胶包埋黑根霉菌丝体对水中Pb^2＋吸附性能的研究

本文研究了明胶包埋黑根霉菌丝体的包埋条件及包埋后对水中Ｐｂ~（２＋）的吸附作用。结果表明，包埋比例为６／１（Ｗ／Ｗ），交联剂甲醛用量为２５％，凝胶化温度为４０℃，ＰＨ＝１０．０为包埋反应的最佳条件。包埋后的饱和吸附量可达１２１．２ｍｇ／ｇ，比未包埋黑根霉下降１０．８％。吸附平衡时间延长至８００分钟。ｐＨ值对吸附量有较大影响，ＰＨ＝４．０时，吸附最佳。升高温度有利于吸附。流速对动态吸附有很大影响。ＨＮＯ３和ＮａＯＨ可以对吸附剂进行解吸与再生，解吸率在９４％以上。明胶包埋后黑根霉具有较好的物理性能，断裂压缩强度为１２８．１Ｎ／ｃｍ２。     

A Highly Sensitive Spectrophotometric Assay of Bleomycins Based on the Fading Reaction of Some Halofluorescein Dyes

In weak acidic medium, anticancer antibiotics bleomycin A5 （BLMA5） and bleomycin A2 （BLMA2） can react with halofluorescein dyes such as erythrosin （Ery）, eosin Y （EY）, eosin B （EB） and rose bengal （RB） by virtue of electrostatic attraction and hydrophobic force to form the ion-association complexes, which can result in the fading reactions of four halofluorescein dyes. The maximum fading wavelengths of these four dyes were located at 527 nm for Ery, 515 nm for EY, 517 nm for EB and 546 nm for RB, respectively. The decrements of absorbance （AA） were directly proportional to the concentrations of bleomycin in a certain range. A new method for the determination of bleomycins anticancer drugs based on fading reactions of halofluorescein dyes has been developed. The method was not only highly sensitive but also simple and rapid. The molar absorptivities （ε） ranged from 1.5 × 10^5 to 7.5 × 10^5 L·mol^-1·cm^-1. It was applied to determination of the bleomycins in human serum, urine and rabbit serum samples. In this work, the spectral properties and the optimum reaction conditions were investigated. The structure of ion-association complexes and the reaction mechanism were discussed.     

Nonequilibrium solid phase formation studied by lattice dynamics calculation and ion beam mixing in an immiscible Co-Ag system

For the equilibrium immiscible Co-Ag system, a proven realistic ab initio derived n-body potential is applied to study the nonequilibrium solid phase formation at three chemical stoichiometries of Co/Ag = 1:3, 1:1, and 3:1. To predict the structural stability, the elastic constants and the phonon spectra are calculated at the chosen stoichiometries with a total of eight hypothetical crystalline structures. The calculated results suggest that four compounds, that is, D0(3) CoAg3, B1 CoAg, B2 CoAg, and D0(3) Co3Ag, are unstable, as they all feature negative elastic constants as well as imaginary phonons, and that another four compounds of both fcc-type L1(2) and hcp-type D0(19) structures at chemical stoichiometries of Co/Ag = 1:3 and 3:1, respectively, may elastically be favored and therefore obtainable under some specific conditions. It is also found that all the calculated elastic constants and phonon spectra are coincident within the framework of the elastic theory. Moreover, the calculated elastic constants are in good agreement with those acquired directly from ab initio calculations, lending support to the validity of the ab initio derived n-body Co-Ag potential as well as its resultant elastic constants and the phonon spectra. Interestingly, some of the predicted nonequilibrium solid phases, that is, two hcp-type compounds at chemical stoichiometries of Co/Ag = 1:3 and 3:1, respectively, are indeed obtained in ion beam mixing experiments and their lattice constants determined by diffraction analysis are in good agreement with those from calculations.     

螯合型二甘醇钛酸酯的合成及其催化性能研究

报导了两种新的螯合型二甘醇钛酸酯的合成方法，进行了ＩＲ和ＵＶ鉴定，并作为酯化反应催化剂催化合成了邻苯二甲酸二辛酯。研究了酯化反应转化率与反应时间、反应温度及催化剂用量的关系，探讨了催化剂结构与催化性能的关系。     

酶分子在试管内的定向进化及其在手性有机物合成中的应用

本文扼要介绍了当今改进酶分子性能的有效手段———分子定向进化技术的基本方法如易错PCR和DNA洗牌,以及派生的一些新技术的原理与进展,并列举了在手性有机物合成中一些成功的实例,为该领域的研究与应用提供了一些新的信息。     

Traceless solid-phase synthesis of nitrogen-containing heterocycles and their biological evaluations as inhibitors of neuronal sodium channels

The preparation of pyrimidine-2-thione, pyrimidine-2-one, pyrimidine, and benzo[b][1,4]diazepine derivatives using traceless solid-phase sulfone linker strategy is described. Key steps involved are (i) sulfinate S-alkylation, (ii) sulfone anion alkylation with an epoxide, (iii) gamma-hydroxyl sulfone --> gamma-ketosulfone oxidation, and (iv) traceless product release by a one-pot elimination-cyclization process. Elimination-cyclization was carried out under basic conditions with thiourea, methyl thiourea, methyl urea, guanidine hydrochloride, benzamidine hydrochloride and ortho-phenylene diamine. Twenty-three compounds were prepared, and 14 of them were evaluated by the Batrachotoxin (BTX) radioligand binding assay for their binding affinity to neuronal sodium channels. Compound 7c was found to be a potential neuronal sodium channels blocker.     

自由体积与亲水性对环氧涂层防护性能的影响

报道了涂层聚合物自由体积和亲水性对涂层腐蚀防护性能影响的初步研究结果.实验表明,相对于自由体积,树脂的亲水性是决定树脂吸水率的更主要因素.低亲水性涂层腐蚀防护性能的提高主要源自到达涂层/金属界面的水量的显著降低.但由于采用活性酯固化的环氧树脂涂层中水通道的尺寸相对较大,水合离子扩散较容易,因此该类涂层覆盖下的金属基体被润湿部分的腐蚀趋势反而较一般涂层为大.