Influence of organic bases on constructing 3D photoluminescent open metal-organic polymeric frameworks

Four three-dimensional non-interpenetrating open coordination frameworks constructed from the CTC ligand (CTC =cis,cis-1,3,5-cyclohexanetricarboxylate) coordinated to metal ions (Mn(II) and Cd(II)): Mn(3)(CTC)(2)(DMF)(2)(1); Cd(3)(CTC)(2)(H(2)O)(3).H(2)O (2); Cd(3)(CTC)(2)(4,4'-bpy)(2)(EG)(2)(3); Cd(3)(CTC)(2)(mu(2)-hmt)(DMF)(C(2)H(5)OH)(H(2)O).2H(2)O (4)(DMF = dimethylformamide and EG = ethylene glycol) have been synthesized by slow evaporation of DMF-C(2)H(5)OH-H(2)O solutions of M(II)(Mn(II) or Cd(II)) and CTC in the presence of the organic bases TEA (triethylamine), TEA, 4,4'-bpy (4,4'-bipyridine) and hmt (hexamethylenetetramine), respectively, and structurally characterized by X-ray crystallography. The polymer constructed by CTC and Mn(II) exhibits a 3-D architecture with 5 x 9 A channels; the polymer formed by CTC and Cd(II) exists a 3-D extended framework with 9 x 9 A channels; wave-like sheet subunits of the polymer are upheld by 4,4'-bpy ligands resulting in a 3-D framework with 4 x 10 A channels; two-fold alternate sheet subunits of the polymer are interlinked by mu(2)-hmt ligands to form a novel 3-D architecture with 7 x 8 A channels. Polymers exhibit their strongest excitation peaks at 391, 390 and 394 nm, respectively, and their main strong emission peaks are at 543, 460 (with a shoulder peak at about 570 nm) and 557 nm, respectively.     

A convenient catalytic approach to synthesize straight boron nitride nanotubes using synergic nitrogen source

Straight boron nitride nanotubes (BNNTs) with pure hexagonal phase were conveniently prepared by heating the mixture of Mg(BO₂)₂ · H₂O, NH₄Cl, NaN₃ and Mg powder in an autoclave at 600 °C for 20–60 h. These BNNTs had diameters mainly ranging 30–300 nm and lengths up to 5 μm, and a majority of them had at least one closed end. Besides the traditional end tips, additional cone-like tips were frequently found to be attached on the BNNTs. The effects of temperature, reactants and the possible mechanism of the catalytic formation of the BNNTs are discussed.     

Hydrothermal Synthesis and Optical Properties of ZnO Nanostructured Films Directly Grown from/on Zinc Substrates

Uniform ZnO nanorods arrays are grown directly from and on Zn foils in pure water under hydrothermal conditions at a relatively low temperature. The nanorods are 80–200 nm in diameter and ∼ 1 μm in length, which grow on the Zn foil along the [001] direction. By changing the pure water to a urea solution, a Zn compound ([Zn₅(OH)₆(CO₃)₂], a precursor of ZnO nanoflowers film, is created by self-assembly. The ZnO nanoflowers film can be easily obtained by heating the [Zn₅(OH)₆(CO₃)₂] compound in N₂ at 350∘C for 5–6 hours. Possible growth processes of the ZnO nanorods arrays and the [Zn₅(OH)₆(CO₃)₂] nanoflowers are discussed. Photoluminescence properties of the as-prepared ZnO nanostructures have been measured. The ZnO nanorods array synthesized using our method has minimal defects so that only band-gap emission is observed. However, the ZnO nanoflowers film, obtained by heating the [Zn₅(OH)₆(CO₃)₂] nanoflower precursor in N₂, is polycrystalline and displays strong defect-related emission.     

Gaseous nitryl azide N4O2: A joint theoretical and experimental study

Gaseous nitryl azide N₄O₂ is generated by the heterogeneous reaction of gaseous ClNO₂ with freshly prepared AgN₃ at −50 °C. The geometric and electronic structure of the molecule in the gas phase has been characterized by in situ photoelectron spectroscopy (PES) and quantum chemical calculations. The experimental first vertical ionization energy of N₄O₂ is 11.39 eV, corresponding to the ionization of an electron on the highest occupied molecular orbital (HOMO) {4a″(π_{nb(N4–N5–N6)})}⁻¹. An apparent vibrational spacing of 1600 ± 60 cm⁻¹ (ν_asO1N2O3) on the second band at 12.52 eV (π_{nb(O1–N2–O3)}) further confirms the preference of energetically stable chain structure in the gas phase. To complement the experimental results, the potential-energy surface of this structurally novel transient molecule is discussed. Both calculations and spectroscopic results suggest that the molecule adopts a trans-planar chain structure, and a five-membered ring decomposition pathway is more favorable.     

Using three major criteria to evaluate aromaticity of five-member C-containing rings and their Si-, N-, and P-substituted aromatic heterocyclics

In this paper, we used bond-length equalization, aromatic stabilization energies (ASE) and nucleus-independent chemical shifts (NICS), calculated with (density functional theory) B3LYP levels at the 6-311+G^** basis set, to evaluate the aromaticity of a set of 38 five-member planar π-electron aromatic systems: sila-, aza- and phospha- derivatives and their parent systems. The result revealed statistically significant correlations among the above three criteria, and the order of aromaticity of the whole set was: Aza- derivatives rings > Phospha- derivatives rings > Sila- derivatives rings > Carbon-containing rings; NICS(0.6) and NICS(0.8) had the same results in evaluating the order of aromaticity in our case.     

光固化阻燃单体、树脂合成及其阻燃机理研究

本文综述了过去十余年间中国科技大学施文芳教授研究组在光固化阻燃技术领域的工作成果，主要包括活性单体、稀释剂、光固化树脂配方等体系，品类有磷酸酯类单体、含磷丙烯酸酯、超支化丙烯酸酯树脂、膦酸酯类单体和树脂、丙烯酸化环状磷腈、甲基丙烯酸化三聚氰胺、含磷环氧单体等十余种。同时介绍了这些配方体系的合成、性能和应用方法，以及对其热降解、阻燃性能评价和阻燃机理的研究。     

三唑类硫醚及二硫醚化合物的合成

以2-苯基-1，2，3-三唑-4-甲酰肼为原料，合成了6个新的含连三唑和均三唑的硫醚类化合物，并经IR、^1HNMR、MS和元素分析进行了结构表征。     

用EXAFS研究NiO在γ-Al2O3表面上的分散

本文使用EXAFS方法研究NiO在γ-Al_2O_3的表面上的分散情况。文章讨论了Ni含量为7%、13%、18%、26%、35%的NiO/γ-Al_2O_3体系的径向结构函数图以及Ni含量为13%、26%的NiO/α-Al_2O_3样品的径向结构函数图,认为NiO能在γ-Al_2O_3表面上成单层分散。分散后的Ni-O距离接近NiO晶体的Ni-O距离,表明Ni离子和γ-Al_2O_3表面上的氧有很强的相互作用。     

Kinetics study of thermal decomposition of epoxy resins containing flame retardant components

Hyperbranched polyphosphate ester (HPPE) and phenolic melamine (PM) were blended in different ratios with a commercial epoxy resin to obtain a series of flame retardant resins. The thermal decomposition mechanism of their cured products in air was studied by thermogravimetric analysis and in situ Fourier-transform infrared spectroscopy. The degradation behaviours of epoxy resins containing various flame retardant components were found to be greatly changed. The incorporation of phosphorus and nitrogen compounds improved the thermal stability at elevated temperature. The kinetics of thermal decomposition was evaluated by Kissinger method, Flynn-Wall-Ozawa method and Horowitz-Metzger method. The results showed that the activation energy at lower degree of the degradation decreased by the incorporation of flame retardant components, while increased at higher degree of the degradation.